paule Posted April 2, 2021 Share #1 Posted April 2, 2021 (edited) Hallo, ich versuche schon seit Stunden Xpenology auf meinem NAS zu installieren. Leider komme ich nicht weiter. Habe den Bootstick erstellt, das hat glaube ich auch alles funktioniert. Leider kann ich nach dem Booten das NAS nicht im Netzwerk finden finden. Habe schon alle Loader durchprobiert. Habe das Asrock h410m-itx mit einem Pentium G6400. Welche DSM bzw. welchen Loader sollte ich nutzen? Mir kommt es so vor, als wenn die Netzwerkarte nicht erkannt wird? Edited April 2, 2021 by paule Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 3, 2021 Share #2 Posted April 3, 2021 12 hours ago, paule said: Welche DSM bzw. welchen Loader sollte ich nutzen? Mir kommt es so vor, als wenn die Netzwerkarte nicht erkannt wird? wäre in dem fall denkbar (10th gen cpu, also sehr neues board) könne eine neuere revision des i219 sein die vom treiber in meiner extra/extra2.lzma noch nicht dabei ist hast die denn die letzte extra/extra2 probiert? boote mal eine live linux und schau mal mit lspci nach welche device id der netzwerkkontroller hat (vendor id sollte je 8086 sein (device class 0200 für netzwerkkontroller) generell sollte 1.04b 918+ damit gehen wenn die eine pcie netzwerkkarte greifbar hast steck die mal rein und versuche es damit Quote Link to comment Share on other sites More sharing options...
paule Posted April 3, 2021 Author Share #3 Posted April 3, 2021 Hallo, so siehts in dem NAS aus. PCI Karte habe ich leider gerade nicht rumliegen, habe mir aber bei Ebay eine ersteigert. Mal sehen ob´s damit geht. mint@mint:~$ lspci 00:00.0 Host bridge: Intel Corporation Device 9b73 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 9ba8 (rev 03) 00:14.0 USB controller: Intel Corporation Device a3af 00:14.2 Signal processing controller: Intel Corporation Device a3b1 00:16.0 Communication controller: Intel Corporation Device a3ba 00:17.0 SATA controller: Intel Corporation Device a382 00:1d.0 PCI bridge: Intel Corporation Device a39a (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a3da 00:1f.2 Memory controller: Intel Corporation Device a3a1 00:1f.3 Audio device: Intel Corporation Device a3f0 00:1f.4 SMBus: Intel Corporation Device a3a3 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (12) I219-V 01:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] (rev 10) Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 3, 2021 Share #4 Posted April 3, 2021 ok wir bauchen die vollen angaben also "lspci -k" 0000:00:1f.6 Class 0200: Device 8086:xxxx das wäre die netzwerkakrte und die xxxx ist das device auch "Subsystem: Device" wenn vorhanden Quote Link to comment Share on other sites More sharing options...
paule Posted April 4, 2021 Author Share #5 Posted April 4, 2021 Okay, ich hoffe damit kannst du mehr anfangen? lspci -k 00:00.0 Host bridge: Intel Corporation Device 9b73 (rev 03) DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device 9b73 00:02.0 VGA compatible controller: Intel Corporation Device 9ba8 (rev 03) DeviceName: Onboard - Video Subsystem: ASRock Incorporation Device 9ba8 Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Device a3af DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3af Kernel driver in use: xhci_hcd 00:14.2 Signal processing controller: Intel Corporation Device a3b1 DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3b1 00:16.0 Communication controller: Intel Corporation Device a3ba DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3ba Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 SATA controller: Intel Corporation Device a382 DeviceName: Onboard - SATA Subsystem: ASRock Incorporation Device a382 Kernel driver in use: ahci Kernel modules: ahci 00:1d.0 PCI bridge: Intel Corporation Device a39a (rev f0) Kernel driver in use: pcieport 00:1f.0 ISA bridge: Intel Corporation Device a3da DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3da 00:1f.2 Memory controller: Intel Corporation Device a3a1 DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3a1 00:1f.3 Audio device: Intel Corporation Device a3f0 DeviceName: Onboard - Sound Subsystem: ASRock Incorporation Device 288a Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_sof_pci 00:1f.4 SMBus: Intel Corporation Device a3a3 DeviceName: Onboard - Other Subsystem: ASRock Incorporation Device a3a3 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (12) I219-V DeviceName: Onboard - Ethernet Subsystem: ASRock Incorporation Ethernet Connection (12) I219-V Kernel driver in use: e1000e Kernel modules: e1000e 01:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] (rev 10) Subsystem: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] Kernel driver in use: iwlwifi Kernel modules: iwlwifi mint@mint:~$ lspci -n 00:00.0 0600: 8086:9b73 (rev 03) 00:02.0 0300: 8086:9ba8 (rev 03) 00:14.0 0c03: 8086:a3af 00:14.2 1180: 8086:a3b1 00:16.0 0780: 8086:a3ba 00:17.0 0106: 8086:a382 00:1d.0 0604: 8086:a39a (rev f0) 00:1f.0 0601: 8086:a3da 00:1f.2 0580: 8086:a3a1 00:1f.3 0403: 8086:a3f0 00:1f.4 0c05: 8086:a3a3 00:1f.6 0200: 8086:0d55 01:00.0 0280: 8086:24fb (rev 10) mint@mint:~$ Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 4, 2021 Share #6 Posted April 4, 2021 6 hours ago, paule said: 00:1f.6 0200: 8086:0d55 das ist die netzwerkkarte und die ID ist im bereits verwendeten treiber in der extra/extra2 0.13.3 drin also wäre die frage On 4/3/2021 at 2:31 AM, IG-88 said: hast die denn die letzte extra/extra2 probiert? https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/ davon abgesehen wird auch ohne das hardware transcoding nicht gehen und für deine cpu brauchst du auch noch zusätzlich den modifizierten i915 treiber da der i915 treiber wie er von synology kommt die gpu so nicht erkennt (zu neu, der treiber den die verwenden ist von ende 2017, aber zu glück hat intel an der gpu nicht viel gemacht, die ist intern immer noch gen 9.5 wie beim vorgänger coffee lake) Quote Link to comment Share on other sites More sharing options...
paule Posted April 6, 2021 Author Share #7 Posted April 6, 2021 So, ich gebe es auf. Netzwerkarte wird erkannt, ich kann das NAS auch finden, aber leier kommt Fehler 13. Keine Ahnung was jetzt wieder ist. Ich glaube ich gehe auf Unraid. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 6, 2021 Share #8 Posted April 6, 2021 1 hour ago, paule said: So, ich gebe es auf. Netzwerkarte wird erkannt, ich kann das NAS auch finden, aber leier kommt Fehler 13. Keine Ahnung was jetzt wieder ist. Ich glaube ich gehe auf Unraid. OMV ist auch nicht so schlecht error 13 ist üblicherweise falsche vid/pid in der grub.cfg, es gibt zwar immer wieder fälle bei denen es trotz korrekter vid/pid nicht gehen soll aber reproduzieren konnte ich das hier noch nie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.