Jump to content
XPEnology Community

HP microserver Gen8 and hp-ams


Recommended Posts

@youhq 

Running DS3615Xs DSM 6.2.3-25426 Update 3 with loader 1.03b works for me with the 4sag spk packaged hilo.ko , but not @v02max standard or 3617 hpilo.ko, or the one @IG-88 provided , (maybe something changed since these where compiled) 

 

I am also able to replace amshelper with the more recent 2.10.1 release (red hat 7) . 

 

I'm not able to see software though . 

 

does anybody know what the options are after calling Amshelper ? specifically -M1,5,14,16,18,23,99  (I think 99 must relate to the software monitoring) 

 

Thanks 

 

Link to comment
Share on other sites

1 hour ago, scoobdriver said:

Running DS3615Xs DSM 6.2.3-25426 Update 3 with loader 1.03b works for me with the 4sag spk packaged hilo.ko , but not @v02max standard or 3617 hpilo.ko, or the one @IG-88 provided , (maybe something changed since these where compiled) 

 

as a general rule, dont use driver (*.ko) from 6.2.1 and 6.2.2 for 6.2.3

for 6.2.3 you should try stuff that worked with 6.2.(0) and the original loader back in 2018

Edited by IG-88
  • Like 2
Link to comment
Share on other sites

  • 1 year later...
  • 2 weeks later...
On 4/5/2022 at 7:44 PM, haldi said:

Anyone on DSM7 has got this working?

 in theory it might work

hpilo.ko as driver is part or kernel 4.4 and is no problem to build  (beside 3615 all units we have for 7.x use that)

packages like the "hp_ams-5.2_2.5.0-1.spk" will not work as 7.x prevents things like using root user to run a package but its possible to mimic the installation of the spk (can be extracted and there are scripts for installing and running) and then match it the way it has to be to run in 7.x

i native 7.x might be better but as long as there is none it might be possible to make it work by installing the files manually

 

Link to comment
Share on other sites

8 minutes ago, IG-88 said:

hpilo.ko as driver is part or kernel 4.4 and is no problem to build  (beside 3615 all units we have for 7.x use that)

Oh. Yeah. For some reason all people with a HP Microserver Gen8 baremetal ran the 3615 so i did that too.^^

 

might take a look at a manual installation if i have too much time.

If it works i'll report back here. Thanks.

Link to comment
Share on other sites

1 hour ago, haldi said:

Oh. Yeah. For some reason all people with a HP Microserver Gen8 baremetal ran the 3615 so i did that too.^^

in 7.0 there is a new kernel version, so no kernel modules 6.2.x will work there, if you want a system with security fixes you best chance is rp loader for 6.2.4

that way you can still use the old spk and even the old 6.2.3 driver

 

Quote

might take a look at a manual installation if i have too much time.

If it works i'll report back here. Thanks.

if you go 7.x then you would at least need the hpilo.ko driver for the platform in question (i use 918+ aka apollolake myself so i could provide a driver for that without much effort)

edit: as the driver is for 7.0 918+ and might work an 3617/3622 too (same kernel version) but its no use for 3615

(and as hpe microserver gen8 is only 3rd gen intel, it cant run 918+)

 

hpilo.ko

Edited by IG-88
Link to comment
Share on other sites

  • 3 weeks later...
On 4/17/2022 at 6:10 PM, IG-88 said:

in 7.0 there is a new kernel version, so no kernel modules 6.2.x will work there, if you want a system with security fixes you best chance is rp loader for 6.2.4

that way you can still use the old spk and even the old 6.2.3 driver

 

if you go 7.x then you would at least need the hpilo.ko driver for the platform in question (i use 918+ aka apollolake myself so i could provide a driver for that without much effort)

edit: as the driver is for 7.0 918+ and might work an 3617/3622 too (same kernel version) but its no use for 3615

(and as hpe microserver gen8 is only 3rd gen intel, it cant run 918+)

 

hpilo.ko 367.28 kB · 4 downloads

Hello, may I ask how you compiled, I compiled error, prompting as shown in the picture.

Can you help me.Thank you

My machine is: Gen8 DS3615xs  7.0.1

微信截图_20220429175359.png

Link to comment
Share on other sites

17 hours ago, shenwrt said:

Hello, may I ask how you compiled

i still use the things i wrote about here but you need to look for some info about added thinhs for 6.2 and when using 7.0 you also need the stuff from here (https://archive.synology.com/download/ToolChain)

https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/

 

but maybe use this one (does not need to be win10)

https://xpenology.com/forum/topic/7341-tutorial-compile-xpenology-drivers-in-windows-10/

 

there are also "DSM_Developer_Guide_6_0.pdf" and "DSM_Developer_Guide_7_0_Beta.pdf" from synology on how to set up a build enviroment

 

Link to comment
Share on other sites

  • 3 weeks later...
On 5/6/2022 at 3:04 AM, IG-88 said:

i still use the things i wrote about here but you need to look for some info about added thinhs for 6.2 and when using 7.0 you also need the stuff from here (https://archive.synology.com/download/ToolChain)

https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/

 

but maybe use this one (does not need to be win10)

https://xpenology.com/forum/topic/7341-tutorial-compile-xpenology-drivers-in-windows-10/

 

there are also "DSM_Developer_Guide_6_0.pdf" and "DSM_Developer_Guide_7_0_Beta.pdf" from synology on how to set up a build enviroment

 

OK,Thank you very much. 

It is already working properly.

Although its fan speed has not been reduced... It works at 44%🤣🤣🤣

This is the version of gen8 dsm7.0.1 ds3615xs.

give to those who need it.

hp-ams.zip

  • Thanks 1
Link to comment
Share on other sites

  • 2 months later...
On 4/17/2022 at 7:10 PM, IG-88 said:

in 7.0 there is a new kernel version, so no kernel modules 6.2.x will work there, if you want a system with security fixes you best chance is rp loader for 6.2.4

that way you can still use the old spk and even the old 6.2.3 driver

 

if you go 7.x then you would at least need the hpilo.ko driver for the platform in question (i use 918+ aka apollolake myself so i could provide a driver for that without much effort)

edit: as the driver is for 7.0 918+ and might work an 3617/3622 too (same kernel version) but its no use for 3615

(and as hpe microserver gen8 is only 3rd gen intel, it cant run 918+)

 

hpilo.ko 367.28 kB · 4 downloads

Can I use this AMS driver to HPE Microserver Gen10 Plus with iLO 5?

My DSM version is DSM 7.1-42661 Update 4 for DS3617xs.

Link to comment
Share on other sites

  • 1 month later...

Hi!

 

I'm running DSM 7.1.1-42962 Update 1 for DS3622xs+ in a HP Proliant Microserver Gen8 (Xeon E3 1260L and 16GB RAM).

 

I'm trying to setup hpilo module without success. I tested the latest ko modules but are not acceted by the kernel (my kernel is  4.4.180+) even I downloaded linux-4.4.x.txz (it's 4.4.180) and renamed makefile to identify it as 4.4.180+ and the ompiled hpilo.ko. The module loads ok but it crashed when I call amsHelper.

 

Anyone running hpilo.ko with 4.4.180+ kernel?

is kernel 4.4.180+ source code available to complie the module?

any other idea?

 

Thanks in advance

Best Regards.

 

Edited by yonesmit
  • Sad 1
Link to comment
Share on other sites

  • 3 weeks later...

AFAIK you cannot run hp-ams on DSM7 as it requires root privs and DSM7 does not allow software installed via .spk to run as root.

 

If you really want it to manage/monitor your hardware you could install ESXi on your Gen8 and run xpenology as a guest. There are loads of threads and guides on how to do this on the forums.

 

jooi, what is it you want from hp-ams? There may be another way to achieve it...

Link to comment
Share on other sites

@yonesmit Hi, from old notes, you will need a linux system and a process like the below : 

 

Kernel sources : 

 

https://archive.synology.com/download/ToolChain/Synology NAS GPL Source/7.0-41890 

 

You can download the source and the toolkit for your platform 

 

https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwell-7.0.dev.txz/download

 

I would extract the toolkit into $KHOME and the kernel source inside $KHOME 

 

You have to : 

 

cp linux-4.4.x/synoconfigs/broadwell to linux-4.4.x/.config 

cd linux-4.4.x

echo + > .scmversion

 

make oldconfig 

make modules_prepare

 

 

In my example the toolkit is extracted inside /opt/dsm-kernel/broadwelll/

 

And then use a script like : 

 

KERNEL_SOURCE="/opt/dsm-kernel/broadwell/linux-4.4.x"
KHOME="/opt/dsm-kernel/broadwell"

function dsmmake(){

make \
CROSS_COMPILE="$KHOME/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/bin/x86_64-pc-linux-gnu-" \
CFLAGS="-I$KHOME/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/include/" \
LDFLAGS="-I$KHOME/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/lib/" \
RANLIB="/usr/bin/x86_64-linux-gnu-ranlib" \
LD="/usr/bin/x86_64-linux-gnu-ld" \
CC="/usr/bin/x86_64-linux-gnu-gcc" \
LD_LIBRARY_PATH="$KHOME/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/lib" \
-C "$KHOME/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/lib/modules/DSM-7.0/build/" \
ARCH=x86_64 M=`pwd` modules $@

}

 

cd $YOURSOURCES

dsmmake 

 

 

Link to comment
Share on other sites

  • 1 month later...

thanks @4sag @shenwrt @IG-88 @v02max

 

I have packed the spk file, but there is no machine test. Please feed back if you have any problems.

 

for DSM6.2.3 6.2.4

918:apollolake broadwell

3615:bromolow

 

Edited by Polanskiman
spk files deleted at the request of the user
Link to comment
Share on other sites

SHH connection repair is required after DSM7 installation

 

sudo sed -i 's/package/root/g' /var/packages/hp-ams/conf/privilege

 

I have packed the spk file, but there is no machine test. Please feed back if you have any problems.

 

for DSM7.x

918:broadwell apollolake dockerx64 kvmx64 denverton broadwellnk geminilake r1000 v1000

3615:bromolow

 

Edited by Polanskiman
spk files deleted at the request of the user
  • Haha 1
Link to comment
Share on other sites

Cloud you please make a spk package of DVA3221 DSM7? I try to use hp_ams-2.9.1-DSM7-918.spk on DVA3221 and it doesn’t work. I have tried to run the command after installation and it shows No such file or directory. Because DVA3221 adds eight cameras, I have to use this image. I'm using it on a DL20 GEN9, thanks a lot.

Edited by lwdamazing
Link to comment
Share on other sites

22 hours ago, tbc0309 said:

SHH connection repair is required after DSM7 installation

 

sudo sed -i 's/package/root/g' /var/packages/hp-ams/conf/privilege

 

I have packed the spk file, but there is no machine test. Please feed back if you have any problems.

 

for DSM7.x

918:broadwell apollolake dockerx64 kvmx64 denverton broadwellnk geminilake r1000 v1000

3615:bromolow

hp_ams-2.9.1-DSM7-918.spk 3.52 MB · 1 download   hp_ams-2.9.1-DSM7-3615.spk 3.51 MB · 1 download

Cloud you please make a spk package of DVA3221 DSM7? I try to use hp_ams-2.9.1-DSM7-918.spk on DVA3221 and it doesn’t work. I have tried to run the command after installation and it shows No such file or directory. Because DVA3221 adds eight cameras, I have to use this image. I'm using it on a DL20 GEN9, thanks a lot.

Link to comment
Share on other sites

14 minutes ago, lwdamazing said:

Cloud you please make a spk package of DVA3221 DSM7? I try to use hp_ams-2.9.1-DSM7-918.spk on DVA3221 and it doesn’t work. I have tried to run the command after installation and it shows No such file or directory. Because DVA3221 adds eight cameras, I have to use this image. I'm using it on a DL20 GEN9, thanks a lot.

 

/sbin/insmod /var/packages/hp-ams/target/hpilo.ko
./var/packages/hp-ams/target/sbin/amsHelper -f -I0 -M1,5,14,16,18,23,99

SSH connects to NAS and run the above command. What's the feedback

Link to comment
Share on other sites

On 12/24/2022 at 11:25 AM, tbc0309 said:

 

/sbin/insmod /var/packages/hp-ams/target/hpilo.ko
./var/packages/hp-ams/target/sbin/amsHelper -f -I0 -M1,5,14,16,18,23,99

SSH connects to NAS and run the above command. What's the feedback

hi I try to enter the command but he seems to have an error. Merry Christmas!

 

752019885_1672038713.thumb.png.473e3857e10d362e9cd00269722853f9.png

Link to comment
Share on other sites

On 12/23/2022 at 6:00 AM, tbc0309 said:

SHH connection repair is required after DSM7 installation

 

sudo sed -i 's/package/root/g' /var/packages/hp-ams/conf/privilege

 

I have packed the spk file, but there is no machine test. Please feed back if you have any problems.

 

for DSM7.x

918:broadwell apollolake dockerx64 kvmx64 denverton broadwellnk geminilake r1000 v1000

3615:bromolow

hp_ams-2.9.1-DSM7-918.spk 3.52 MB · 2 downloads   hp_ams-2.9.1-DSM7-3615.spk 3.51 MB · 2 downloads

 

19 hours ago, Madboy128 said:

Hello, this is my first post here. Can anyone make HP-ASM spk for Gen8 DSM7 - 3622+?

 

Please look at the post above. "918:broadwell apollolake dockerx64 kvmx64 denverton broadwellnk geminilake r1000 v1000" broadwellnk is 3622

Link to comment
Share on other sites

After install HP-AMS /918 package/ - start putty and type sudo sed -i 's/package/root/g' /var/packages/hp-ams/conf/privilege
after this command click on repair on hp-ams in package center tell me "failed to run the package service", DSM send me again messege "repair hp-ams" ?  some kind of solution?

hp1.jpg

hp2.jpg

server3.jpg

Edited by Madboy128
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...