Jump to content
XPEnology Community

ubuntu 14.04 with xen 4.4 and xpenoboot 5565.2


kloana

Recommended Posts

Hi,

 

first of all thank you for the great solution, and for all of your work.

 

Currently i'm running xpenology on a bare metal and it wokrs great. Today i tried to virtualize xpenology on xen 4.4 under ubuntu 14.04.

 

And what should i say: i'm having toubles with qemu, xen, xpenoboot and acpi. When i start the domU with xpenoboot i only get following log's and the domu isn't starting. Short after the boot menu i, see the vmlinuz line, and that was it,.... Nothing more.

 

Here is the qemu log of the domU.

 

root@xen:~# more /var/log/xen/qemu-dm-synology.log
domid: 60
Using file /dev/xenserver/synology in read-write mode
Strip off blktap sub-type prefix to /installsrc/XPEnoboot_DS3615xs_5.2-5565.2.iso (drv 'aio')
Using file /installsrc/XPEnoboot_DS3615xs_5.2-5565.2.iso in read-only mode
Watching /local/domain/0/device-model/60/logdirty/cmd
Watching /local/domain/0/device-model/60/command
Watching /local/domain/60/cpu
char device redirected to /dev/pts/5
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = a26f6deb-be07-4ad6-96dd-61eddb65c1a4
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/60/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/a26f6deb-be07-4ad6-96dd-61eddb65c1a4/vncpasswd.
medium change watch on `hdc' (index: 1): aio:/installsrc/XPEnoboot_DS3615xs_5.2-5565.2.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
vcpu-set: watch node error.
[xenstore_process_vcpu_set_event]: /local/domain/60/cpu has no CPU!
xs_read(/local/domain/60/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/60/log-throttling'
medium change watch on `/local/domain/60/log-throttling' - unknown device, ignored
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
ACPI:debug: write addr=0xb044, val=0x0.
ACPI:debug: write addr=0xb045, val=0x89.
.....
ACPI:debug: write addr=0xb044, val=0xfc.
ACPI:debug: write addr=0xb045, val=0x89.
ACPI:debug: write addr=0xb044, val=0xfd.
ACPI:debug: write addr=0xb045, val=0x89.
ACPI:debug: write addr=0xb044, val=0xfe.
ACPI:debug: write addr=0xb045, val=0x89.
ACPI:debug: write addr=0xb044, val=0xff.
ACPI:debug: write addr=0xb045, val=0x89.

 

Maybe someone can help to solve the Problem.

 

Thanks in advance,

regards

Herbert

Link to comment
Share on other sites

  • 1 month later...

A4-5000 CPU, RAM 4GB

xubuntu 14.04.3

xen 4.4 from apt-get

config :

builder = 'hvm'
memory = 2048
shadow_memory = 8
name = "nas"

vif = [ 'type=ioemu, mac=00:11:11:76:75:74, bridge=xenbr0,  model=e1000']

disk        = [
       	'phy:/dev/md127,hda,w',
       	'file:/home/feodor/XPEnoboot_DS3615xs_5.2-5592.2.iso,hdc:cdrom,r'
             ]
boot = 'dc'
# VNC
sdl = 0
vnc = 1
vncconsole = 1
vncpasswd='megapass'
vnclisten='0.0.0.0'
stdvga=0
serial = 'pty'

on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'destroy'
# Misc
acpi = '1'
apic = '1'
localtime=1
viridian=1
xen_platform_pci=1

First time, on start, you MUST connect by VNC(i use tight vnc, raw mode picture) and choose install mode

Then - wait several minutes and try to find new nas by synology software. After that - install

 

I tried to use sda device for my HDD - it doest not work.

Also, tried to use file instead of raw device - it does not work.

Average speed on my platform is 40/25 write/read(strange) by samba on 3 cores/1024 MB RAM config

Link to comment
Share on other sites

×
×
  • Create New...