Jump to content
XPEnology Community

DSM 6.2.4-25556


Guest
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

xJvL4cY.png

 

https://www.synology.com/en-global/releaseNote/DSM?model=DS3615xs

 

Révélation

Version: 6.2.4-25556

(2021-03-08)

 

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

Integrates the beep control options for degraded/crashed volumes and abnormal SSD caches.

The new LED indicator behavior makes the system status easier to distinguish on 15-series and newer models. (Learn more)

DNS Server must be updated to version 2.2.3-5028 or above to be compatible with this update.

LDAP Server must be updated to version 2.4.49-2515 or above to be compatible with this update.

This update includes fixes to the below issues mentioned in 6.2.4-25554.

Fixed an issue where external hard drives couldn't wake from hibernation on certain platforms (Grantley, Broadwell, Broadwellnk, Broadwellntbap, Purley).

Fixed an issue where users could not sign in to Synology mobile apps after they had cleared the remembered device list in DSM 6.2.4.

 

Compatibility & Installation

Enhanced the password policy. Passwords must exclude usernames and descriptions, include both upper-case and lower-case letters as well as numerical digits. The minimum password length is 8 characters.

Fixed a compatibility issue between the Geminilake platform and virtual machines running Windows 10.

On a newly installed version of DSM, file rename and deletion log events for SMB will be enabled by default.

 

What's New

Users can now set 10 email addresses to receive system notifications.

Enhanced domain database synchronization performance by syncing only altered data.

Supports bad block detection on Synology SSDs.

Supports the updating of Synology HDD and SSD firmware directly via DSM.

Improved fan speed control based on the Synology network interface card temperature for 19-series and newer models.

 

Fixed Issues

Fixed an issue where the "Enable Web Assistant" option didn't work on NVR216 and NVR1218.

Fixed an issue where the date and time formats for scheduled tasks were inconsistent in the widget and system settings.

Fixed an issue where scheduled tasks may fail to be executed or modified.

Fixed an issue where tasks scheduled at a high frequency generated a lot of logs and occupied system partitions.

Fixed an issue where the custom welcome text may differ on the preview and actual login page due to character limits.

Fixed an issue where data could still be written to LUNs after the volume runs out of space.

Fixed an issue where if Wi-Fi dongles are installed, some available network interfaces weren't listed when users edit iSCSI targets.

Fixed an issue where iSCSI services may be unstable when the host is too busy or when users disable iSCSI targets and ending sessions simultaneously.

Fixed an issue where initiators couldn't connect to the iSCSI target after ethernet interfaces reconnect in a high-availability cluster.

Fixed an issue where packages may not operate properly when drives migrated from another Synology NAS cause volume ID conflicts.

Fixed an issue where users may not be able to find their Synology NAS in My Network Places on Windows when WS-Discovery isn't operating properly.

Fixed an issue where Log Center didn't record recycle bin enabling/disabling events.

Fixed a security vulnerability regarding Sudo. (Synology-SA-21:02)

Fixed multiple security vulnerabilities. (Synology-SA-21:03)

 

Limitations

In response to the enhancement of domain database synchronization efficiency, the domain user/group list will be updated once an hour when it is created with Synology Directory Server.

 

Edited by EVOTk
Link to comment
Share on other sites

  • Guest changed the title to DSM 6.2.4-25556
  • Polanskiman pinned, unpinned and featured this topic

Outcome of the installation/update: FAILED

- DSM version prior update:  DSM 6.2.X

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: UNRAID - TUF GAMING B550M-PLUS - RAM 64Gb DDR4 NON-ECC - AMD Ryzen 9 3900X

- Additional comments: The update was applied on a fresh VM.

- Notes: I guess no differences from the previous version...

  • Sad 1
Link to comment
Share on other sites

  • 3 weeks later...

Outcome of the installation/update: FAILED

- DSM version prior update:  DSM 6.2.2_24922

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: PVE - J1900

- Additional comments: The update was applied on a fresh 24922 and applied Fixsynoboot.sh before trying upgrade to 25556

- Notes: Upgrade step failed after progress 100%, waiting 10 min after reboot, the VM shown booted up in PVE, but cannot be found by LAN IP or find.synology.com anymore

  • Sad 1
Link to comment
Share on other sites

- Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER V1.03b  - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  MB: Asrock C236 WSI | CPU: Intel Xeon E3-1235L V5 Quad-core

- Additional comment: Upgrade step failed after progress 100%  could not boot.

  • Thanks 1
  • Sad 1
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: va not found; Failed to process header message in console, as reported earlier.

Edited by mitzone
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: FRESH INSTALL

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: va not found; Failed to process header message in console, as reported earlier.

Edited by mitzone
  • Sad 2
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Supermicro C7Z170-SQ, i5-6500

- Notes: Loader boots normally, no hard drive activity.

  • Sad 3
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: 6.2.4-25556

- Loader version and model: Jun’s Loader v1.03b DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: Not possible to ping after upgrade, try to restart 2 times..

 

 

Edited by postgardh
  • Sad 2
Link to comment
Share on other sites

 - Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.4-25556

- Loader version and model JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Proxmox VM

- Additional comments: Fresh Install of DSM 6.2.4-25556 failed with 

va not found
Failed to process header

 

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus H97 PLUS

- Additional comments: can't reach DSM after installation (neither with find.synology or synology assistant). NIC leds turned orange.

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Asus H110M-K

- Additional comments: can't reach DSM after installation (neither with find.synology or synology assistant). NIC IP unreachable

Link to comment
Share on other sites

 

 Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro x11ssh-ln4f

- Additional comments: can't reach DSM after installation (neither with find.synology nor synology assistant). Fresh installation of DSM 6.2.3-25426 Update 3 also unsuccessful (neither with find.sysnology nor synology assistant).

Link to comment
Share on other sites

 - Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.4-25556

- Loader version and model JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Proxmox 6.3-6 on a Dell Optiplex 7050 Micro MFF i5-7500T - 12GB RAM - 2*500GB SSD via this guide

- Additional comments: Fresh Install of DSM 6.2.4-25556 failed with:

va not found 
Failed to process header

 

Link to comment
Share on other sites

  • 4 weeks later...

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver N54L

- Notes: Loader appears to boot normally, but there is no response to PING or find.synology.  Rollback to previous DSM version was successful, thankfully!

  • Like 1
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2-23739 

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver N54L + HP NC365T NIC

- Notes: Loader appears to boot normally, but there is no response to PING or find.synology.  Successfully rolled back to previous DSM version (see here) and performed manual web update to DSM 6.2.3-25426 Update 3

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 (clean install)

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes (virtio)

- Installation type: KVM (Proxmox)

- Additional comments: reboots and stalls before booting Linux with the following on serial:

 

va not found
Failed to process header

 

Link to comment
Share on other sites

  • 2 months later...

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: Jun’s Loader v1.03b DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Gigabyte GA-B75N, i3-4130, 4GB RAM, NIC: Intel Pro/1000 PT

- Additional comment :

I tryed an update from DS3615xs and a fresh install DS918+ following guides, without success

 

Link to comment
Share on other sites

  • 1 month later...

- Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: No

- Installation type: Baremetal - MSI B250M MORTAR, Intel Pentium G4560T, 8GB RAM

- Additional comment : Loader appears to work, but machine did not response to ping as well as web server did not work. Fortunate i was able to successfully roll back to previous DSM version.

Edited by psychodracon
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: redpill-DS918+_6.2.4-25556_b1630506799

- Using custom extra.lzma: No

- Installation type: BAREMETAL - ASRock J5005-ITX 8GB RAM

- Additional comment :

Edited by _robert
  • Like 5
Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...