Lan port Died (RIP) need a New Card


Recommended Posts

So the onboard Lan on my motherboard died

Running XPEnoboot_DS3615xs_5.2-5565.1

Need a Replacement Nic card that work out of the box Cheep 

 

also I don't more Small PCIE Slots the current board just has one .

Link to post
Share on other sites

maybe a used hp nic might do the trick, they might be out of production for while now

either a intel or a broadcom nic will be possible

here is a listing of supported devices on that loader

(it would also be possible to check a  specific driver for its pci id's but you usually don't get the info what id's and sub id's tha card has before buying)

# Network drivers
# MII hardware support
MII_NET="mii"
# MDIO-compatible transceivers
MDIO_NET="mdio"
# Digital 21*4* Tulip ethernet driver
TULIP_NET="tulip"
# HP 10/100VG PCLAN (ISA, EISA, PCI) support 
HP_NET="hp100"
# AMD8111 based 10/100 Ethernet Controller. Driver Version 3.0.7
# PCnet32 and PCnetPCI based ethercards
AMD_NET="amd8111e pcnet32"
# Intel(R) PRO/100 Network Driver
# Depends: MII_NET
INTEL1M_NET="e100"
# Intel(R) PRO/1000 Network Driver
INTELP_NET="e100 e1000 e1000e"
# Intel(R) Gigabit Ethernet
INTEL1G_NET="ioatdma igb"
# Intel(R) 10 Gigabit PCI Express
INTEL10G_NET="${MDIO_NET} ixgb ixgbe"
# Intel(R) 82599 Virtual Function (ixgbevf)
# Intel(R) Gigabit Virtual Function
INTELV_NET="igbvf ixgbevf"
INTEL_NET="dca ${MII_NET} ${INTEL1M_NET} ${INTELP_NET} ${INTEL1G_NET} ${INTEL10G_NET}"
# Nvidia nForce ethernet driver
NVIDIA_NET="forcedeth"
# Broadcom NetXtreme II CNIC Driver
# Broadcom NetXtreme II BCM5706/5708/5709/5716
# Broadcom 44xx/47xx 10/100 PCI ethernet driver
# Broadcom Tigon3 ethernet
# Depends: MII_NET
BROADCOM_NET="${MII_NET} uio ssb mmc_core bnx2 b44 libphy broadcom tg3"
# RealTek RTL-8139C+ series 10/100 PCI Ethernet driver
# RealTek RTL-8139 Fast Ethernet driver
# RealTek RTL-8169 Gigabit Ethernet driver
# RealTek RTL8101E, RTL8102E(L) and RTL8103E(L) Ethernet driver
# Depends: MII_NET
REALTEK_NET="${MII_NET} 8139cp 8139too r8169 r8168 r8101 r8169_new"
# VIA Rhine PCI Fast Ethernet
# VIA Networking Velocity Family Gigabit Ethernet
# Depends: MII_NET
VIA_NET="${MII_NET} via-rhine crc-ccitt via-velocity"
# Marvell Yn 2 Gigabit Ethernet
MARVELL_NET="skge sky2"
# Atheros L1F
# Atheros L1 Gigabit Ethernet 
# Atheros Fast Ethernet Network
# Atheros 100/1000M Ethernet
# Atheros 1000M Ethernet Network
# Depends: MII_NET
ATHEROS_NET="alx atl1 atl2 atl1c atl1e"
# JMicron JMC2x0 PCI Express Ethernet
# Depends: MII_NET
JMICRON_NET="jme"
# SiS sis190/191 Gigabit Ethernet driver
# SiS 900 PCI Fast Ethernet driver
SIS_NET="sis190 sis900"
# ServerEngines BladeEngine 10Gbps NIC Driver 4.1.307r
BE_NET="be2net"
# Brocade 10G PCIe Ethernet driver
BROCADE_NET="bna"
# Broadcom NetXtreme II BCM57710/57711/57711E/57712/57712_MF/57800/57800_MF/57810/57810_MF/57840/57840_MF Driver
# Broadcom NetXtreme II CNIC Driver
BROADCOM10G_NET="${MDIO_NET} bnx2x ipv6 cnic"
# Chelsio T3 Network Driver
# Chelsio T4 Network Driver
CHELSIO_NET="cxgb cxgb3 cxgb4 cxgb4vf"
# Mellanox ConnectX HCA
# Mellanox ConnectX HCA
MELLANOX_NET="mlx4_core mlx4_en"
# QLogic/NetXen (1/10) GbE Intelligent Ethernet Driver
# QLogic ISP3XXX Network Driver v2.03.00-k5
# QLogic 1/10 GbE Converged/Intelligent Ethernet Driver
# QLogic 10 Gigabit PCI-E Ethernet Driver
QLOGIC_NET="netxen_nic qla3xxx qlcnic qlge"
# Cisco VIC Ethernet NIC Driver
CISCO_NET="enic"
# Infiniband Core API support
IB_CORE="ib_core"
# InfiniBand userspace verbs access
IB_VERBS="${IB_CORE} ib_uverbs"
# InfiniBand userspace Connection Manager access
IB_UCM="${IB_VERBS} ib_cm ib_ucm"
# Infiniband MAD API support
IB_MAD="${IB_CORE} ib_mad" 
# InfiniBand userspace MAD packet access
IB_UMAD="${IB_MAD} ib_umad"
# InfiniBand subnet administration query support
IB_SA="${IB_MAD} ib_sa"
# InfiniBand CM
IB_CM="${IB_SA} ib_cm"
# InfiniBand SCSI RDMA Protocol initiator
IB_SRP="scsi_transport_srp ${IB_CM} ib_srp"
# IP-over-InfiniBand net driver
IB_IP="ipv6 ${IB_CM} ib_ipoib"
# Mellanox InfiniBand HCA low-level driver
MELLANOX_HCA="${IB_MAD} ib_mthca"
# Mellanox ConnectX HCA InfiniBand driver
MELLANOX4_IB="${IB_MAD} mlx4_core mlx4_ib"
# Chelsio T3 RDMA Driver
CHELSIOT3_IB="${IB_CORE} cxgb3 iw_cxgb3"
# Chelsio T4 RDMA Driver
CHELSIOT4_IB="${IB_CORE} cxgb4 iw_cxgb4"
# QLogic IB driver
QLOGIC_IB="${IB_MAD} ib_qib"
# QLogic InfiniPath driver
QLOGIC_IPATH="${IB_CORE} ib_ipath"

 

 

 

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.