daverdfw Posted August 16, 2015 Share #1 Posted August 16, 2015 Hey all, New user to XPEnology. Have everything working great, only thing I noticed is my Atom D525 cpu which has 2 cores, is only being seen as 1 core by DSM whenever I do a cat /proc/cpuinfo is this normal? Here is the output of the command DiskStation> cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel® Atom CPU D525 @ 1.80GHz stepping : 10 microcode : 0x107 cpu MHz : 1799.976 cache size : 512 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm bogomips : 3599.95 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Link to comment Share on other sites More sharing options...
daverdfw Posted August 16, 2015 Author Share #2 Posted August 16, 2015 well that was obvious, for some reason HyperThreading was turned off in the BIOS. Link to comment Share on other sites More sharing options...
Recommended Posts