Jump to content
XPEnology Community

DSM 6.2.4-25554


Guest
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

st9BstH.png

 

https://www.synology.com/en-global/releaseNote/DSM?model=DS3615xs

 

Révélation

(2021-02-23)

 

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

 

Compatibility & Installation

Enhanced the password policy. Passwords must exclude usernames and descriptions, include both upper-case and lower-case letters as well as numerical digits. The minimum password length is 8 characters.

Fixed a compatibility issue between the Geminilake platform and virtual machines running Windows 10.

On a newly installed version of DSM, file rename and deletion log events for SMB will be enabled by default.

 

What's New

Users can now set 10 email addresses to receive system notifications.

Enhanced domain database synchronization performance by syncing only altered data.

Supports bad block detection on Synology SSDs.

Supports the updating of Synology HDD and SSD firmware directly via DSM.

Improved fan speed control based on the Synology network interface card temperature for 19-series and newer models.

 

Fixed Issues

Fixed an issue where the "Enable Web Assistant" option didn't work on NVR216 and NVR1218.

Fixed an issue where the date and time formats for scheduled tasks were inconsistent in the widget and system settings.

Fixed an issue where scheduled tasks may fail to be executed or modified.

Fixed an issue where tasks scheduled at a high frequency generated a lot of logs and occupied system partitions.

Fixed an issue where the custom welcome text may differ on the preview and actual login page due to character limits.

Fixed an issue where data could still be written to LUNs after the volume runs out of space.

Fixed an issue where if Wi-Fi dongles are installed, some available network interfaces weren't listed when users edit iSCSI targets.

Fixed an issue where iSCSI services may be unstable when the host is too busy or when users disable iSCSI targets and ending sessions simultaneously.

Fixed an issue where initiators couldn't connect to the iSCSI target after ethernet interfaces reconnect in a high-availability cluster.

Fixed an issue where packages may not operate properly when drives migrated from another Synology NAS cause volume ID conflicts.

Fixed an issue where users may not be able to find their Synology NAS in My Network Places on Windows when WS-Discovery isn't operating properly.

Fixed an issue where Log Center didn't record recycle bin enabling/disabling events.

Fixed a security vulnerability regarding Sudo. (Synology-SA-21:02)

Fixed multiple security vulnerabilities. (Synology-SA-21:03)

 

Limitations

In response to the enhancement of domain database synchronization efficiency, the domain user/group list will be updated once an hour when it is created with Synology Directory Server.

 

Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: appears to complete the install, reboots and hangs at 100% CPU utilization immediately after the bootloader initializes

 

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: appears to complete the install, reboots and hangs at 100% CPU utilization immediately after the bootloader initializes

 

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: appears to complete the install, reboots and hangs at 100% CPU utilization immediately after the bootloader initializes

Edited by flyride
  • Haha 1
  • Sad 7
Link to comment
Share on other sites

Outcome of the installation/update: FAILED

- DSM version prior update:  DSM 6.2.3-25426 Update 3

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: UNRAID - TUF GAMING B550M-PLUS - RAM 64Gb DDR4 NON-ECC - AMD Ryzen 9 3900X

- Additional comments: The update was applied on a fresh VM.

- Notes: Same as @flyride "appears to complete the install, reboots and hangs at 100% CPU utilization immediately after the bootloader initializes"

Edited by gadreel
  • Sad 1
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: No

- Installation type: HP MicroServ GEN8

- Notes: Upgrade successfully but nothing works after

Edited by ozef
  • Sad 1
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: New Installation

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: Dell Latitude 7470

- Notes: After DSM Installation the Network card was active but no IP get assigned anymore, fresh install with DSM 6.2.3 is working

  • Sad 2
Link to comment
Share on other sites

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: Installation seems fine, but than stuck at bootloader.  FixSynoboot.sh (latest from feb 2021) was used. Logging in COM-port (serial) shows the following right after the grub2 bootloader menu selection:

Quote

va not found
Failed to process header 

This looks to be the same as some users reported with DSM7 preview. Seems Synolgy has changed a lot in their boot-process/images/kernel in 6.2.4.

Edited by xpe-usr
  • Thanks 2
  • Sad 1
Link to comment
Share on other sites

  • 4 weeks later...

Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi VM

- Notes: va not found; Failed to process header message in console, as reported earlier.

  • Sad 1
Link to comment
Share on other sites

Outcome of the installation/update: FAILED

- DSM version prior update:  DSM 6.2.3-25426 Update 3

- Loader version and model: Jun's Loader v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: ASRock Z390M-ITX/ac - VENGEANCE® LPX 16GB (2 x 8GB) DDR4 DRAM 3000MHz C15 Memory Kit - Intel 9900K

- Additional comments: Update applied to running system.

- Notes: System hangs initializing, appears to be during driver/kernel module load.

  • Sad 2
Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3_25432

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: QNAP-TS-269_PRO - NIC: Intel Atom(TM) CPU D2701 @ 2,13GHz (2 Kerne, 4 Threads)

- Additional comments: DON'T RESTART HANGED NO POSSIBILITIES TO FIX IT

  • Sad 4
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3_25426

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi 7 U2 on HPE MicroServer G10 X3421

- Additional comments: Downloaded and applied the update through DSM control panel, took a while till it's back up running but lost network connection - no  response to ping, while through ESX console, could see the VM booted successfully - with high CPU uti  and no network so not working at all; had to restore from the snapshot taken b4 the update.

  • Sad 3
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.4-25556

- Loader version and model JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Proxmox VM

- Additional comments: Fresh Install of DSM 6.2.4-25556 failed with 

va not found
Failed to process header

 

  • Sad 4
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.4-25556

- Loader version and model JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: KVM

- Additional comments: Fresh Install of DSM 6.2.4-25556 failed with va not found Failed to process header

  • Sad 4
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3_25432

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: HP ProLiant MicroServer G7 - N54L

- Additional comments: Update seems ok, but it doesn't boot after restart. Recovery doesn't work.

  • Sad 5
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.2_24922 Update 6

- Loader version and model: JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: HP ProLiant MicroServer Gen10 Plus

- Additional comments: Fresh Install - Update seems ok, but it doesn't boot after restart - Synology Assistant can't find the server.

  • Sad 3
Link to comment
Share on other sites

Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25426 Update 3

- Loader version and model: Jun's Loader v1.03b - DS3617xs

- Using custom extra.lzma: YNO

- Installation type: Custom Hardware

- Additional comments: Help :(

  • Sad 5
Link to comment
Share on other sites

Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3.25426 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: TheCUS N5550

- Notes: Would not complete install, system still worked

Edited by gquiring
  • Sad 6
Link to comment
Share on other sites

Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: unRAID KVM

- Additional comments: INSTALLED AND REBOOTED, AFTER 30 MIN. NOTHING. CANNOT FIND VM ANYWHERE.

  • Sad 8
Link to comment
Share on other sites

  • 4 weeks later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3_25426

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES

- Installation type: ML-350 G6, CPU-X5690, 36Gb-RAM, 2xLSI9211-IT  with 12x2Tb in RAID6, 2x512Gb CACHE-SSD, DELL X520-2T 10Gbe 

- Additional comments: Downloaded and applied the update through DSM control panel. after reboot no network connection, no activity. 

  • Sad 5
Link to comment
Share on other sites

  • 3 weeks later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 (clean install)

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes (virtio)

- Installation type: KVM (Proxmox)

- Additional comments: reboots and stalls before booting Linux with the following on serial:

 

va not found
Failed to process header

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...