vvvbananvvv Posted February 3, 2021 Share #1 Posted February 3, 2021 (edited) Hi All, I'm new in this area of xpenology. I read many of tutorial but I still have problem with start install from USB-stick DSM 6.2 on my HP ProBook 4320s. My laptop config: Intel i5 m540 2.53GHz 4096 MB RAM CHIPSET Intel HM57 NIC RTL8111/8168/8411 GBit Controller HD Graphics I created USB-stick according to guidelines but they not boot. Maybe it's problem with BIOS configuration. Can someone help Me ? 6.1 WORKS FINE Edited February 3, 2021 by vvvbananvvv Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 3, 2021 Share #2 Posted February 3, 2021 14 hours ago, vvvbananvvv said: I created USB-stick according to guidelines but they not boot. Maybe it's problem with BIOS configuration. Can someone help Me ? 1.03b for 3615/17 are the only one for 6.2 you can use and they need CSM/legacy mode if its uefi bios (and also you need to boot from the non uefi usb boot device) https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/ when in legacy mode you might need the loader in mbr (default is gpt), so if the above does not work you can try the loader from here https://xpenology.com/forum/topic/20270-dsm-62-loader-with-mbr-partition-table/ 1 Quote Link to comment Share on other sites More sharing options...
vvvbananvvv Posted February 4, 2021 Author Share #3 Posted February 4, 2021 14 hours ago, IG-88 said: 1.03b for 3615/17 are the only one for 6.2 you can use and they need CSM/legacy mode if its uefi bios (and also you need to boot from the non uefi usb boot device) https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/ when in legacy mode you might need the loader in mbr (default is gpt), so if the above does not work you can try the loader from here https://xpenology.com/forum/topic/20270-dsm-62-loader-with-mbr-partition-table/ It's work fine. Only NIC isn't work. Quote Link to comment Share on other sites More sharing options...
vvvbananvvv Posted February 4, 2021 Author Share #4 Posted February 4, 2021 Network Card now is work. Find.synology.com - doesn't found Router - no device connected Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 4, 2021 Share #5 Posted February 4, 2021 8 hours ago, vvvbananvvv said: It's work fine. Only NIC isn't work. you cant know for sure without a serial console - and i know for sure that the realtek r8168 driver is working especially if 6.1 is working it seems likely to be a uefi csm problem manual says its uefi so look for l http://content.etilize.com/User-Manual/1016571086.pdf page 102 "Set the legacy boot order" best is to use F9 to select the boot device manually and it needs to be the usb from the legacy section Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.