chester91 Posted January 19, 2021 Share #1 Posted January 19, 2021 Hello Everybody! I have got an xpenology DSM 6.1.7-15284, and I have got an Axagon ADSA-ST DUAL HDD. In this dock the xpenology see the first HDD, or the second not. How can I mount the second HDD, if sudo fdisk -l command cant see it. Quote Link to comment Share on other sites More sharing options...
flyride Posted January 19, 2021 Share #2 Posted January 19, 2021 How are we supposed to know which ones are the dock? I see /dev/sdv and /dev/sdw, are those the disks? Quote Link to comment Share on other sites More sharing options...
chester91 Posted January 19, 2021 Author Share #3 Posted January 19, 2021 (edited) I see this two HDD in Syno, but I have got a third, and I cant see it. edit: and this third HDD inside the Axagon second HDD dock. Edited January 19, 2021 by chester91 Quote Link to comment Share on other sites More sharing options...
flyride Posted January 19, 2021 Share #4 Posted January 19, 2021 Please do us a favor and explain what you know about the drives and devices you have. You say you have a dual dock, but I see two drives. What's the third drive? How is it connected? What are the drive sizes? !!! Quote Link to comment Share on other sites More sharing options...
chester91 Posted January 19, 2021 Author Share #5 Posted January 19, 2021 The first you see (sdv), is a 2.5 HDD with Sata -> USB 2.0, the second (sdw) is the second HDD, whitch works in the Axagon first HDD dock, and the third drive in the Axagon second HDD dock. This is the problem, that is the third isnt appear. Quote Link to comment Share on other sites More sharing options...
flyride Posted January 19, 2021 Share #6 Posted January 19, 2021 (edited) 7 minutes ago, chester91 said: The first you see (sdv), is a 2.5 HDD with Sata -> USB 2.0, There is not very much technical information about how the Axagon device interacts with the system, other than to say it does not require a special device driver. If you remove the drive listed above, and then unplug and replug the Axagon, do both Axagon drives appear? I believe that the default settings for the device bitmaps only support two USB devices. Edited January 19, 2021 by flyride Quote Link to comment Share on other sites More sharing options...
IG-88 Posted January 19, 2021 Share #7 Posted January 19, 2021 i have a very similar device, from its id its this one (asm1153/asm1051e based) https://linux-hardware.org/index.php?id=usb:174c-55aa work ootb with 6.2.3 (3617) and shows both usb slots as external devices the default usb config in synoinfo.conf is "3" so its for just 2 devices but even when i plugin in two usb flash drives and add the 2 slot box it gets recognized with its two slots and i see 4 usb devices as external in theory the usb devices should start with sdu and not sdv, maybe look for a device that got sdu (in dmesg) 6 hours ago, chester91 said: DSM 6.1.7-15284 what dsm type is it and was the synoinfo.conf changed? the default config for 3617 looks like this maxdisks="12" esataportcfg="0xff000" usbportcfg="0x300000" internalportcfg="0xfff" Quote Link to comment Share on other sites More sharing options...
flyride Posted January 20, 2021 Share #8 Posted January 20, 2021 If the Axagon works with both drives when the other external is left out, change the bitmaps that allocate slots to device types. SSH into the system, become root, and edit two lines in /etc.defaults/synoinfo.conf Change:usbportcfg="0x300000" tousbportcfg="0x380000" andesataportcfg="0xff000" toesataportcfg="0x7F000" When you are finished, reboot and then you should be able to use three USB devices at a time. Note that this setting may revert after a DSM update. If that happens you will have to apply the changes again. Quote Link to comment Share on other sites More sharing options...
chester91 Posted January 20, 2021 Author Share #9 Posted January 20, 2021 Its not work when only the Axagon connect to it. The sudo fdisk cant see it. My dsm type is DS3615xs, but in deed its a HP T620 thinclient. How can I edit? When I try, I see it: Quote Link to comment Share on other sites More sharing options...
flyride Posted January 20, 2021 Share #10 Posted January 20, 2021 Well, you need to use an editor, such as vi. Perhaps you should try editing on a non-critical file if you have never done this before. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.