Dragsdal 0 Posted January 14 Share Posted January 14 Hey guys, First of all thanks for a brilliant forum. I'm pretty new to Xpenology, but in the last few weeks I have learned a great deal about it and have sucessfully run a DSM 6.2.3-25426 with Update 3 on ESXi. I recently accuired a HPE Proliant MicroServer N40L at a bargain, and have sucessfully installed a bare metal DSM 6.2.3-25426 using Jun's Mod V1.03. Initially I had some trouble figuring out how to enable SHR, as it apparently has been deprecated by Synology. After enabling it, the configuration of discs was pretty straightforward, but one thing makes me wonder: Why on earth is the Storage Pool unable to use 34% of the available HDD capacity? (See picture below) I'm aware what some discspace is reserved for the system itself, but seriously: nearly 2TB? Can anybody shed some light? Thanks! Quote Link to post Share on other sites
bearcat 76 Posted January 14 Share Posted January 14 Hi @Dragsdal and welcome This "Raid Calculator" might explain how and why in a easy way. Quote Link to post Share on other sites
Dragsdal 0 Posted January 14 Author Share Posted January 14 (edited) Hi @bearcat! Thank you for a lightning fast response! I feel somewhat stupid as that visual calculator clearly explains why... I should have done my research better before asking. I'm just glad I posted it in "The Noob Lounge", so I can use that excuse. Thanks again. Edited January 14 by Dragsdal typo Quote Link to post Share on other sites
Mincemeat 0 Posted January 14 Share Posted January 14 Pretty sure SHR is one of the main features of Synology. Hopefully it doesnt go away Quote Link to post Share on other sites
Dragsdal 0 Posted January 14 Author Share Posted January 14 (edited) 2 hours ago, Mincemeat said: Pretty sure SHR is one of the main features of Synology. Hopefully it doesnt go away I think it may already have... I found info here: https://xpenology.club/enable-shr-in-dsm-6/ Edited January 14 by Dragsdal Quote Link to post Share on other sites
IG-88 659 Posted January 14 Share Posted January 14 4 hours ago, Dragsdal said: I feel somewhat stupid as that visual calculator clearly explains why... I should have done my research better before asking. over tumb rule, add all disks and remove biggest disk 29 minutes ago, Dragsdal said: I found info here: faq https://xpenology.com/forum/topic/9394-installation-faq/?do=findComment&comment=81094 Quote Link to post Share on other sites
Mincemeat 0 Posted January 15 Share Posted January 15 10 hours ago, Dragsdal said: I think it may already have... Ah I see, something about it being disabled in ui for enterprise units. Never ran into this problem on 918+ 1.04 loader. DS1821+ new unit and has shr. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.