Trantor Posted July 4, 2015 Share #1 Posted July 4, 2015 Here is the mpt3sas drivers for DSM 5.2. LSI Devices Supported SAS3004, SAS3008, SAS3108 https://download.xpenology.fr/drivers/mpt3sas.ko You can add insmod=mpt3sas to syslinux.cfg in order to automatically load the driver. Link to comment Share on other sites More sharing options...
snoopy78 Posted July 4, 2015 Share #2 Posted July 4, 2015 Trantor...THANK YOU !!! YOU are the man!!! before dmesg | grep LSI [ 1.342973] mpt2sas0: LSISAS2008: FWVersion(19.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00) [ 4.970040] Copyright © 1999-2008 LSI Corporation [ 5.071157] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. after insmod... dmesg | grep LSI [ 1.342973] mpt2sas0: LSISAS2008: FWVersion(19.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00) [ 4.970040] Copyright © 1999-2008 LSI Corporation [ 5.071157] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 294.420358] mpt3sas0: LSISAS3008: FWVersion(08.00.00.00), ChipRevision(0x02), BiosVersion(08.11.00.00) [ 294.737447] mpt3sas1: LSISAS3008: FWVersion(08.00.00.00), ChipRevision(0x02), BiosVersion(08.11.00.00) SSD is beeing detected and after insmod volume comes up again...^^ would now be great to get this into next "official" release...^^ Link to comment Share on other sites More sharing options...
Agent-Orange Posted January 26, 2016 Share #3 Posted January 26, 2016 Hy guys I have a LSI3008 from Fujitsu (CP400i) and I installed it on my new Xpenology NAS, but the controller wont be recognized by the OS. If installed the driver to the syslinux.cfg file, which was on my USBdrive. I added the lines into the file and copied the driver on the root of the USB drive. Should be correct or? Is there something other what I have to do? Link to comment Share on other sites More sharing options...
sfu420 Posted January 27, 2016 Share #4 Posted January 27, 2016 Hi, you don't need copy mp3sas.ko to USB drive. It is already in the package 5.2.5644.4., just not loaded as default. Therefore add insmod=mpt3sas to the APPEND lines in syslinux.cfg and that's it. Link to comment Share on other sites More sharing options...
Agent-Orange Posted January 27, 2016 Share #5 Posted January 27, 2016 @sfu420 Thanks for your help. That means the syslinux.cfg would look like that: LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 insmod=mpt3sas Edit: tried it but still dont the see controller or the drives. Link to comment Share on other sites More sharing options...
sfu420 Posted January 27, 2016 Share #6 Posted January 27, 2016 I also have an LSI3008 card, and it's working well on this way. There are 3 APPEND lines in syslinux.cfg and you must add insmod=mpt3sas to ALL of them in order to proper working at all. Link to comment Share on other sites More sharing options...
Recommended Posts