JasonDragon Posted December 22, 2020 Share #51 Posted December 22, 2020 (edited) Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 3 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL Production NAS – Intel Celeron 3685u, ITX custom board with 13 x SATA, 12 ports from onboard Marvell SSE889215 controller via SFF8087 connectors, 16GB RAM, 9 x 4TB disks, onboard 2 x NIC Intel 211AT, Spare PCIe 16x slot in a Custom 8 x BAY hot swappable ITX NAS case. - Additional comments: manual download and installation of update 3 required. Reboot required. Edited December 22, 2020 by JasonDragon Quote Link to comment Share on other sites More sharing options...
pierch Posted December 22, 2020 Share #52 Posted December 22, 2020 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: Baremetal installation, Gygabyte GA-N3160TN, 8GB RAM - Additional comments: Reboot required by the update, all seems OK. Not using HW transcoding Quote Link to comment Share on other sites More sharing options...
pigr8 Posted December 22, 2020 Share #53 Posted December 22, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: VM - HP Microserver Gen8 - ESXI 7.0U1b 17168206 - LSI 9211-8i passthrough with 5x hdd shr1 and 1x ssd (SMART and TRIM working) - Additional comment: Updated directly from the WebUI in DSM, reboot required. Quote Link to comment Share on other sites More sharing options...
Enigel Posted December 22, 2020 Share #54 Posted December 22, 2020 (edited) Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update2 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 with HP NC-360T NIC - Additional comment: Reboot required Edited December 22, 2020 by Enigel Quote Link to comment Share on other sites More sharing options...
TRTL74 Posted December 22, 2020 Share #55 Posted December 22, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update2 - Loader version and model: JUN'S LOADER V1.03b MBR Zandstraal MOD - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: Intel DP35DP | CPU: Intel Core 2 Quad Q9550 | NIC: Intel 82566DC - Additional comment: Manual install. Reboot required. Now reboot is working fine. Shutdown is not working. - FOXBI's CPU name & cores infomation Change tool: working like a charm, no reinstall required. Edited December 22, 2020 by TRTL74 Quote Link to comment Share on other sites More sharing options...
Sergi1974 Posted December 22, 2020 Share #56 Posted December 22, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer Gen8 Xeon 1220L v2 - Additional comment: Reboot required Quote Link to comment Share on other sites More sharing options...
LWKTECH Posted December 22, 2020 Share #57 Posted December 22, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426-2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL (Motherboard of a Dell OptiPlex 7010 with an i5-3470T, 16GB RAM and a LSI 9211-8i (IT Mode)) - Additional comments: REBOOT REQUIRED Quote Link to comment Share on other sites More sharing options...
DemonRok Posted December 22, 2020 Share #58 Posted December 22, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3617xs - Using custom extra.lzma: No - Installation type: VM - ESXi 6.7 (with FixSynoboot.sh installed) - Additional comment: Reboot required Quote Link to comment Share on other sites More sharing options...
Nick4 Posted December 22, 2020 Share #59 Posted December 22, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: YES - Needed modified extra.lzma and extra2.lzma for hardware transcoding (i915 driver - /dev/dri/ was missing) - Installation type: BAREMETAL - Gigabyte H270N Wi-Fi, Intel i3 7100T - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
Badger Posted December 22, 2020 Share #60 Posted December 22, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: v1.03b - DS3615xs - Using custom extra.lzma: YES. EXTRA3615_V0.11_TEST - Installation type: BAREMETAL - GFORCE 7050M (amd64) - NIC: rtl8169sc – Asusnx1101 - Additional comments: NO PROBLEMS Edited December 22, 2020 by Badger Quote Link to comment Share on other sites More sharing options...
cosmindnl Posted December 22, 2020 Share #61 Posted December 22, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b - DS918+ (with NVME cache) - Using custom extra.lzma: Yes. v0.11 from IG-88 - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) , 32 GB RAM ECC available, 10GBe connection working. H/W transcoding works also using driver extension for 918+ , v0.11, Reboot required: No Quote Link to comment Share on other sites More sharing options...
plaka Posted December 22, 2020 Share #62 Posted December 22, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: No - Installation type: VM - KVM (FixSynoboot.sh) Test system - Additional comment: Reboot required Edited December 22, 2020 by plaka Quote Link to comment Share on other sites More sharing options...
cga20 Posted December 23, 2020 Share #63 Posted December 23, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update2 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC - Additional comments: reboot required Quote Link to comment Share on other sites More sharing options...
mic-cosmos Posted December 23, 2020 Share #64 Posted December 23, 2020 - Outcome of the update: Unsuccessful - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: No - Installation type: VM - ESXI 6.7 (FixSynoboot.sh), Intel EXPI9404PTL Pro/1000 PT Quad Port (Passthrough), Dell 47MCV Perc H200 flashed to LSI 9207-8i IT mode (Passthrough) - Additional comments: Workstation not detected (No IP) with addition of flashed Dell HBA card after update. Built new VM starting from DSM 6.2.3 using VM HD and FixSynoboot.sh, updated to update 3 without issues. Workstation again not detected with addition of flashed Dell HBA card. 1 Quote Link to comment Share on other sites More sharing options...
Alandil Posted December 23, 2020 Share #65 Posted December 23, 2020 - Outcome of the install/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - AsRock Z390M Pro4 / Cpu : i3 9100 / Ram : 16Go DDR4 / Nic : HP NC360T - Additional Comment: Upgrade with DSM function - Reboot required Quote Link to comment Share on other sites More sharing options...
grumpymonk Posted December 23, 2020 Share #66 Posted December 23, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24923 Update 2 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: Centos 8 KVM - GA-Z68MA-D2H-B3 - i5 3550 - 32 GB - 3x4TB WD RED WD40EFRX - Additional comments: main server seems fine Edited December 23, 2020 by grumpymonk Quote Link to comment Share on other sites More sharing options...
manfriday Posted December 23, 2020 Share #67 Posted December 23, 2020 - Outcome of the install/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - AsRock J3455M - additional Intel based NIC Upgrade with DSM function - Reboot required Quote Link to comment Share on other sites More sharing options...
SteetieHJ Posted December 23, 2020 Share #68 Posted December 23, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN8 - Additional comment: Upgraded via DSM function - Reboot Required Edited December 23, 2020 by SteetieHJ Quote Link to comment Share on other sites More sharing options...
siang Posted December 23, 2020 Share #69 Posted December 23, 2020 (edited) - Outcome of the update: Unsuccessful - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: No - Installation type: VM - ESXI 6.5 (FixSynoboot.sh), Intel i350-T4 Quad Port (Passthrough), LSI 9211-8i IT mode (Passthrough) with 8x3TB. - Additional comments: VM with LSI HBA card passthrough should avoid update 3. Not detected (No IP) with LSI 9211-8i HBA card after update. Suspect the DSM not recognise the HBA therefore not booting DSM properly to obtain network IP. Replaced fresh copy of DS3615xs synoboot VM to boot and migrate, then replace fresh copy of DS3617xs synoboot VM and finally migrate back to DS3617xs DSM 6.2.3, follow with manually updating to 6.2.3-25426 Update 2. Stay with 6.2.3-25426 Update 2 until known solution. Edited December 23, 2020 by siang Quote Link to comment Share on other sites More sharing options...
mortisboy Posted December 23, 2020 Share #70 Posted December 23, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3617XS - Using custom extra.lzma: No - Installation type: BAREMETAL - ASUS MAXIMUS V EXTREME - i5 3350P - All Onboard working fine with 6x1TB HDD@Raid5 +Sata 256GB SSD CACHE (test system) - Additional comment: Upgraded via DSM function - Reboot Required Edited December 23, 2020 by mortisboy Quote Link to comment Share on other sites More sharing options...
zpantale Posted December 24, 2020 Share #71 Posted December 24, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE MicroServer Gen10 (P04923-S01) - Additional comments: 10Gtek(Intel) X520-DA1 SFP+ NIC working alongside internal GbE, Reboot Required Quote Link to comment Share on other sites More sharing options...
s3urat Posted December 24, 2020 Share #72 Posted December 24, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN 10 - Additional comment: Using integrated NIC. Upgraded via DSM, reboot required. Quote Link to comment Share on other sites More sharing options...
marigo Posted December 24, 2020 Share #73 Posted December 24, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: No - Installation type: Proxmox 6.2-6 - Additional comment: Intel E1000, FixSynoboot.sh, reboot Quote Link to comment Share on other sites More sharing options...
Carltorn Posted December 24, 2020 Share #74 Posted December 24, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update2 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS H110i-PLUS - i3-6100T - Intel® H110 Express - Realtek® RTL8111H - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
cedric9113 Posted December 24, 2020 Share #75 Posted December 24, 2020 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: No - Installation type: VM - ESXI 6.7 - HP ProLiant MicroServer Gen8 (FixSynoboot.sh), IBM serveraid m1015 flashed to LSI 9211-8i IT mode (Passthrough). - Additional comments: Workstation not detected (No IP) after reboot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.