galerkin Posted April 30, 2015 Share #1 Posted April 30, 2015 When trying to boot XPEnoboot 5.1-5022.3 on my Shuttle xs35 v2, I get various errors. I have downloaded the img file from the dropbox link. See below for details. I suspect that the reason is that the network adapter is not supported. I have two questions: 1. Is this correct, or is there a different cause? 2. Is there anything I can do about it? I know my way around configuring Linux and build stuff so I might be able to contribute. The system runs Linux perfectly well so drivers should not be a problem. Is there a repository / build instructions somewhere? Thanks! System Model: Shuttle xs35 v2 Processor: Intel Dual Core Atom processor D525 (Codename: Pineview-D) Chipset: Intel® NM10 Express Chipset Summary of errors in startup log The output ends with Excution Error Before that, I see the following strange things (in reverse order): Problem with SSDPD Running /usr/syno/etc/rc.d/J03ssdps.sh... /usr/syno/sbin/minissdpd Usage: /usr/syno/sbin/minissdpd [-d] [-6] [-s socket] -[p pidfile] -i [-i ] ... is either an IPv4 address such as 192.168.1.42, or an interface name such as eth0. By default, socket will be open as /var/run/minissdpd.sock and pid written to file /var/run/minissdpd.pid start SSDPD failed. AWK problem /etc.defaults/rc.volume: line 250: awk: not found ADT problem :: Loading module adt7475 [ OK ] Can not detect ADT device, Retry: 1... :: Unloading module adt7475 [ OK ] :: Unloading module i2c-i801 [ OK ] :: Loading module i2c-i801 [ OK ] :: Loading module adt7475 [ OK ] swap / disk problem :: Checking new disks ... No new disk. Do nothing. mdadm: stopped /dev/md1 rc: Use all internal disk as swap. /etc/rc: line 178: sed: not found rc: No assigned swap disk (sda2) can be assembled, use all instead. rc: Use all internal disk as swap. /etc/rc: line 178: sed: not found rc: No disk (sda2) can be assembled. swapon: /dev/md1: Invalid argument mount problems :: Starting /usr/syno/bin/synocfgen... [ OK ] /usr/synobin/synocfgen returns 0 Partition Version=0 Partitoin layout is not DiskStation style. NOT EXECUTE /sbin/e2fsck. mounting /dev/md0 /tmpRoot mount: lseek failed, msg:Invalid argument mount: mounting /dev/md0 on /mptRoot failed: No such device :: mount /dev/md0 fail, returns [FAILED] copy problems :: Copy default /etc [ OK ] cp: can't stat '/tmpRoot/etc.defaults': No such file or directory :: Copy default /usr/syno/etc [ OK ] cp: can't stat '/tmpRoot/usr/syno/etc.defaults': No such file or directory :: Copy default /var [ OK ] cp: can't stat '/tmpRoot/var.defaults': No such file or directory Exit on error [3] no init exists... Thr Apr 30 -8:49:33 UTC 2015 linuxrc.syno failed on 3 Link to comment Share on other sites More sharing options...
galerkin Posted April 30, 2015 Author Share #2 Posted April 30, 2015 I should maybe add that the final thing that happens is that I get a Login prompt. If I knew the login name and password I would be able to troubleshoot this much more efficiently. What are they? Link to comment Share on other sites More sharing options...
galerkin Posted April 30, 2015 Author Share #3 Posted April 30, 2015 Okay, I'm slowly becoming more convinced that it indeed is the ethernet adapter that is the problem as I am able to make it run on two other computers here at home. So, the question remains, how can I create a custom image including my driver? Link to comment Share on other sites More sharing options...
Trantor Posted May 3, 2015 Share #4 Posted May 3, 2015 After looking on Shuttle website, it appear that your model can have a realtek or jmicron network adapter. Boot with ubuntu live and type : lspci -v Post the output Link to comment Share on other sites More sharing options...
Recommended Posts