Vectorr66 Posted April 27, 2015 Share #1 Posted April 27, 2015 Hello, I want to upgrade my HDDs from 2TB to 3TB drives. I looked on the normal way to upgrade drives and it consists of powering the system down and replacing one drive at a time. Is there any difference for us and our DIY Synology way? I currently only have 2 drives in it with redundancy. Thanks so much! Link to comment Share on other sites More sharing options...
Hyperbit Posted April 27, 2015 Share #2 Posted April 27, 2015 I did this on Weekend with my N40L (4 Drives with one Disk redundancy) I Shut down the System and replaced the OLD disk. Then I start the machien and in Webinterface I checked : Repair Volume. It tooks 14hours (First hours a Volume Check, last hours the Disk expanding) I Used XPEnoboot 5.1-5022.3 (03/03/2015) Link to comment Share on other sites More sharing options...
Vectorr66 Posted April 27, 2015 Author Share #3 Posted April 27, 2015 Ok so obviously I shut it down, since I have two drives I take out the one and replace with new one. The question is after the system rebuilds then I have to do the other drive right? Thanks again, just do not want to break anything. Link to comment Share on other sites More sharing options...
Recommended Posts