l0fL Posted March 9, 2015 Share #1 Posted March 9, 2015 Hallo, ich bin neu hier und habe leider ein Problem, bei dem ich nicht weiter komme. Bei mir erkennt Synology meine USB Ports nicht. Immer wenn ich einen USB Stick, Festplatte oder ein DVB S2 Karte anstecke erscheint unter Externe Geräte in Systemsteuerung nichts. Schon mit verschiedenen Formatierungen ausprobiert und auch an USB2 und 3 Port. Wenn ich "dmesg | grep usb" eingebe kommt folgendes: [spoiler=][ 4.079665] usbcore: registered new interface driver usbfs [ 4.080127] usbcore: registered new interface driver hub [ 4.080946] usbcore: registered new interface driver ethub [ 4.081803] usbcore: registered new device driver usb [ 4.450348] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 24.965193] usb 1-1: device not accepting address 2, error -110 [ 25.087952] usb 1-1: new high-speed USB device number 3 using ehci_hcd [ 29.358374] usbcore: registered new interface driver usb-storage [ 29.377501] usbcore: registered new interface driver usblp [ 29.410364] usbcore: registered new interface driver usbhid [ 29.410369] usbhid: USB HID core driver [ 29.520860] Modules linked in: usbhid hid usblp usb_storage bromolow_synobios(P) adt7475 i2c_i801 btrfs synoacl_vfs(P) zlib_deflate hfsplus md4 hmac tn40xx(O) i2c_algo_bit fuse vfat fat crc32c_intel chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand acpi_cpufreq mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree psnap p8022 llc sit tunnel4 zram© etxhci_hcd xhci_hcd ehci_hcd uhci_hcd ohci_hcd usbcore usb_common mvsas arcmsr megaraid_sas megaraid_mbox megaraid_mm mpt2sas mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pdc_adma iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic cnic ipv6 bnx2x be2net sis900 sis190 atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8101 r8168 r8169 8139too 8139cp tg3 broadcom libphy bnx2 ssb(O) uio forcedeth ixgbe ixgb igb ioatdma e1000e e1000 e100 dca pcnet32 amd8111e mdio mii container thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: i2c_i801] [ 45.602391] usb 1-1: device not accepting address 3, error -110 [ 45.725150] usb 1-1: new high-speed USB device number 4 using ehci_hcd [ 46.474239] usbcore: registered new interface driver snd-usb-audio [ 46.517136] snd_usb_hiface: Unknown symbol __snd_printk (err 0) [ 61.116982] usb 1-1: device not accepting address 4, error -110 [ 61.239722] usb 1-1: new high-speed USB device number 5 using ehci_hcd [ 76.631183] usb 1-1: device not accepting address 5, error -110 Synology ist auf dem aktuellsten Stand. Folgende Komponenten habe ich verbaut: 3*4TB WD Red 8GB SOC-RAM AsRock Q1900 ITX System Power 7 300W Fractal Design Node 304 Bootet von USB Stick 8GB DS3615xs DSM 5.1-5022 Update 3 Bin echt am verzweifeln! Wäre echt schöne wenn jemand helfen könnte. Danke schonmal! Gruß Quote Link to comment Share on other sites More sharing options...
apejovic Posted March 10, 2015 Share #2 Posted March 10, 2015 Wie sind die BIOS Einstellungen? Stell mal von "Automatic" auf "Enabled" bei USB. Berichte dann bitte Quote Link to comment Share on other sites More sharing options...
Cheesy Posted March 11, 2015 Share #3 Posted March 11, 2015 Aussage von apejovic kann ich ebenfalls bestätigen. Habe erst letzte Woche bei einem Kumpel ein NAS aufgesetzt mit dem ASRock Q1900. Bei diesem waren ebenfalls die USB Ports nicht da. Ein Setzen von Automatic auf Enable bei USB im UEFI brachte die Lösung. Grüße aus Augsburg Quote Link to comment Share on other sites More sharing options...
forum-merlin Posted March 12, 2015 Share #4 Posted March 12, 2015 war auch bei mir so! Habe es anhand dieses Tipps hier nun auch geschafft meine USB Devices zu sehen. Bei mir ist es ein AsRock Q2900M Board. Danke apejovic Gruß Merlin Quote Link to comment Share on other sites More sharing options...
apejovic Posted March 12, 2015 Share #5 Posted March 12, 2015 Kein Thema. Bitte Welche Bios Version habt ihr? Überlege mir auch ein q1900-itx zu holen.Kann jemand die Leistungsaufnahme messen von seinem System? Gesendet vom C64 mit 8-Bit Soundmodulator und Datasette Quote Link to comment Share on other sites More sharing options...
GrayDeath Posted March 13, 2015 Share #6 Posted March 13, 2015 q1900-itx Leistungsaufnahame mit Windows 2012 R2 = 12 Watt im IDLE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.