Sign in to follow this  
berzerker

Updating to a new .img??

Recommended Posts

Hi guys, im new to xpenology im currently running a HP Microserver N40L it has been flashed with a modified bios and ive upgraded the ram to 8gb.

I recently installed xpenology (DSM-5.0-4493) it has been running great with 5x 4TB hard drives in SHR, I needed a bit more space so I purchased another 4tb drive and went to expand my array this seemed to be going ok it reached 100% but my storage did not increase, i unplugged the new drive and my array went from healthy to degraded i then plugged the drive back in and allowed it to rebuild I thought this was odd it appears all 6 drives are working together as an array.

 

I have done some research and it turns out some DSM releases had known issues with expanding a SHR array I found a post linking to a test image;

 

viewtopic.php?f=2&t=5233&start=20

 

I have downloaded this

 

XPEnoboot_DS3615xs_5.1-5022.2-215c67d.img

 

Is there a guide covering how to update to this .img file i'm extremely cautious of loosing my data (nothing I don't already have backed up but copying 14TB back onto the unit would be an annoyance)

is it as simple as copying the .img file to a usb stick using Rufus and proceeding forward?

Share this post


Link to post
Share on other sites

If you're running baremetal (not virtualized), and booting off a usb stick, just write the new boot image to your stick like you did for your current version. It should boot like nothing happened, then go to the disk Storage Manager>Volume>Manage>expand volume with allocated disk space. It should happen pretty quick (I did this as well).

 

It should all be pretty easy and straight forward, as written above, assuming you didn't mess up your array by removing the disk and booting into a degraded array.

Share this post


Link to post
Share on other sites

diverge - ill give this ago the array is still there and healthy now as I let it rebuild over night it is showing all 6 disks as present fingers crossed this test image fixes my issues

Share this post


Link to post
Share on other sites

ok i have tried the new test image and unfortunately it hasn't fixed my issue has anyone else had a similar problem?

Share this post


Link to post
Share on other sites

ok guys heres whats happening

 

image 1 - shows i have all 6 drives online and ready to expand

http://i.imgur.com/Q8edrCX.png

 

image 2 - I goto expand the volume

http://i.imgur.com/rOJ3GBw.png

 

image 3 - DSM goes to expand

http://i.imgur.com/TBJ6XAG.png

 

image 4 - (happens seconds after image 3) Shows the storage manager again reporting I can expand

http://i.imgur.com/yrT4UR8.png

 

its a constant loop of this I am now running the test image and the latest updated DSM 5.1-5022 Update 2

 

can anyone help me, im actually contemplating nuking this whole install and building a 6 drive array from scratch rather than expanding

Share this post


Link to post
Share on other sites
Sign in to follow this