I have a Thecus N7510 running very stable for about two years now.
There's one thing bugging me and that is that the two USB3 ports on the front are not working.
A fellow Thecus owner has a slightly different model (5 bays instead of 7 and less USB ports). His USB3 port on the front is working fine on his rig.
The controller is the same.
I generated dmesg > dmesg.txt -- I find:
- up to ata10 SATA entries,
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 11.982054] ACPI: bus type USB registered
[ 11.982648] usbcore: registered new interface driver usbfs
[ 11.982958] usbcore: registered new interface driver hub
[ 11.985305] usbcore: registered new interface driver ethub
[ 11.991474] usbcore: registered new device driver usb
[ 12.044255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.064521] ehci-pci: EHCI PCI platform driver
[ 12.064717] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 12.064737] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 12.064750] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 12.064774] ehci-pci 0000:00:1a.7: debug port 1
[ 12.068711] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 12.068754] ehci-pci 0000:00:1a.7: irq 18, io mem 0xc0604c00
[ 12.073979] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 12.074639] hub 1-0:1.0: USB hub found
[ 12.074658] hub 1-0:1.0: 2 ports detected
[ 12.075091] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 12.075119] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 12.075138] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 12.075172] ehci-pci 0000:00:1d.7: debug port 1
[ 12.079124] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 12.079190] ehci-pci 0000:00:1d.7: irq 23, io mem 0xc0604800
[ 12.085009] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 12.086184] hub 2-0:1.0: USB hub found
[ 12.086215] hub 2-0:1.0: 6 ports detected
[ 12.132375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.155401] uhci_hcd: USB Universal Host Controller Interface driver
[ 12.155654] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 12.155666] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 12.155691] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 12.155751] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060a0
[ 12.156752] hub 3-0:1.0: USB hub found
[ 12.156775] hub 3-0:1.0: 2 ports detected
[ 12.157182] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 12.157193] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 12.157213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 12.157274] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
[ 12.160612] hub 4-0:1.0: USB hub found
[ 12.160651] hub 4-0:1.0: 2 ports detected
[ 12.161140] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 12.161153] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.161174] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 12.161238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
[ 12.166040] hub 5-0:1.0: USB hub found
[ 12.166072] hub 5-0:1.0: 2 ports detected
[ 12.166488] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 12.166501] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.166527] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 12.166593] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 12.175048] hub 6-0:1.0: USB hub found
[ 12.175073] hub 6-0:1.0: 2 ports detected
[ 12.252953] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 12.252976] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
[ 12.258420] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 12.258437] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 12.258449] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 12.258461] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 12.258475] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 12.259265] xHCI xhci_add_endpoint called for root hub
[ 12.259274] xHCI xhci_check_bandwidth called for root hub
[ 12.259720] hub 7-0:1.0: USB hub found
[ 12.259750] hub 7-0:1.0: 2 ports detected
[ 12.259970] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 12.259987] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 12.262403] xHCI xhci_add_endpoint called for root hub
[ 12.262412] xHCI xhci_check_bandwidth called for root hub
[ 12.262911] hub 8-0:1.0: USB hub found
[ 12.262941] hub 8-0:1.0: 2 ports detected
[ 12.353584] usbcore: registered new interface driver usb-storage
[ 12.410288] VMware PVSCSI driver - version 1.0.2.0-k
[ 12.410889] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 12.431553] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 12.452532] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 12.517922] Fusion MPT base driver 3.04.20
[ 12.517928] Copyright (c) 1999-2008 LSI Corporation
[ 12.555451] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 12.555621] scsi10 : usb-storage 2-1:1.0
[ 12.555635] Fusion MPT SPI Host driver 3.04.20
[ 12.595793] Fusion MPT SAS Host driver 3.04.20
[ 12.617425] Fusion MPT misc device (ioctl) driver 3.04.20
[ 12.617736] mptctl: Registered with Fusion MPT base driver
[ 12.617745] mptctl: /dev/mptctl @ (major,minor=10,220)
So I edited my /etc/synoinfo.conf and /etc.default/synoinfo.conf
esataportcfg="0xff00000"
internalportcfg="0xfff"
usbportcfg="0xff000"
Unfortunately no USB drives are detected when inserted in either of the front USB ports.
At the end of the dmesg.txt I read:
[ 18.561705] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot
[ 18.563226] hub 7-0:1.0: couldn't allocate port 2 usb_device
[ 24.562167] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot
[ 24.562180] hub 8-0:1.0: couldn't allocate port 1 usb_device
Funny thing is that I can boot DSM from the front USB!
Question
Bogey
I have a Thecus N7510 running very stable for about two years now.
There's one thing bugging me and that is that the two USB3 ports on the front are not working.
A fellow Thecus owner has a slightly different model (5 bays instead of 7 and less USB ports). His USB3 port on the front is working fine on his rig.
The controller is the same.
I generated dmesg > dmesg.txt -- I find:
- up to ata10 SATA entries,
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- xhci_hcd 0000:03:00.0: xHCI Host Controller
So I edited my /etc/synoinfo.conf and /etc.default/synoinfo.conf
esataportcfg="0xff00000"
internalportcfg="0xfff"
usbportcfg="0xff000"
Unfortunately no USB drives are detected when inserted in either of the front USB ports.
At the end of the dmesg.txt I read:
Funny thing is that I can boot DSM from the front USB!
I'm definitely in for some guru guidance...
Thanks,
Eddie
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.