Sniper_X

Completely Stumped... New Install, AREACA controller - no drives detected

Recommended Posts

10 minutes ago, flyride said:

Legacy boot set in BIOS?  (i.e. CSM, non UEFI boot).  It's an old motherboard but it may still need the setting.

usually its not booting at all when its uefi without csm

Share this post


Link to post
Share on other sites

I would agree with that but we don't usually look at a serial output trace so I am not sure what to expect.  The conf file patch failures at the beginning are piquing my interest.

Share this post


Link to post
Share on other sites
15 minutes ago, flyride said:

I would agree with that but we don't usually look at a serial output trace so I am not sure what to expect.

i struggled with that last year, you will see a certain ascii symbol when the kernel starts unpacking and thats it

Share this post


Link to post
Share on other sites
1 minute ago, Sniper_X said:

standby

not for long, its 2am in my timezone

Share this post


Link to post
Share on other sites
2 minutes ago, IG-88 said:

not for long, its 2am in my timezone


OH SHITE!

Booting it up now!  need 5 minutes

Share this post


Link to post
Share on other sites

PANIC...

 

Phoenix TrustedCore(tm) Server
Copyright 1985-2007 Phoenix Technologies Ltd.
All Rights Reserved
ASUS DSBF-D Server/Workstation BIOS Revision 1003.002


CPU = 2 Processors Detected, Cores per Processor = 4
CPU1 : Intel(R) Xeon(R) CPU           E5335  @ 2.00GHz  CPU Speed = 2.00 GHz
CPU2 : Intel(R) Xeon(R) CPU           E5335  @ 2.00GHz  CPU Speed = 2.00 GHz

Press DEL for BIOS Setup
Press F12 for LAN Boot
Press F8 for Boot Menu
32768 MB System RAM Passed
8192 KB L2 Cache
USB 2.0: SanDisk Cruzer Glide







                                                                         90





                   GNU GRUB  version 2.02~beta2-36ubuntu3.14

 +----------------------------------------------------------------------------+
 |*DS3617xs 6.2 Baremetal with Jun's Mod v1.03b                               |
 | DS3617xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall                     |
 | DS3617xs 6.2 VMWare/ESXI with Jun's Mod v1.03b                             |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 +----------------------------------------------------------------------------+

      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, `e' to edit the commands
      before booting or `c' for a command-line.
   The highlighted entry will be executed automatically in 0s.
patching file etc/rc
Hunk #1 succeeded at 184 (offset 13 lines).
patching file etc/synoinfo.conf
Hunk #1 FAILED at 291.
1 out of 1 hunk FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #1 FAILED at 39.
Hunk #2 succeeded at 131 (offset 32 lines).
Hunk #3 succeeded at 694 (offset 179 lines).
1 out of 3 hunks FAILED -- saving rejects to file linuxrc.syno.rej
patching file usr/sbin/init.post
cat: can't open '/etc/synoinfo_override.conf': No such file or directory
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ehci-hcd ... [  OK  ]
:: Loading module ehci-pci ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module uhci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptsas ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mpt2sas ... [  OK  ]
:: Loading module mpt3sas ... [FAILED]
:: Loading module sx8 ... [  OK  ]
:: Loading module aacraid ... [  OK  ]
:: Loading module aic94xx ... [  OK  ]
:: Loading module 3w-9xxx ... [  OK  ]
:: Loading module 3w-sas ... [  OK  ]
:: Loading module 3w-xxxx ... [  OK  ]
:: Loading module mvumi ... [  OK  ]
:: Loading module mvsas ... [  OK  ]
:: Loading module arcmsr ... [  OK  ]
:: Loading module isci ... [  OK  ]
:: Loading module hpsa ... [  OK  ]
:: Loading module nvme ... [  OK  ]
:: Loading module ata_piix ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
All disk ready or timeout execeed
Exit on error [12] /dev/md0 is not ready(status: clear), go to junior mode....
Sun Jul 26 00:09:41 UTC 2020
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=16469476k,nr_inodes=4117369,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 12
starting pid 5368, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [  OK  ]
:: Loading module crc-ccitt ... [  OK  ]
:: Loading module crc-itu-t ... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module ip_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module dca ... [  OK  ]
:: Loading module e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb ... [  OK  ]
:: Loading module be2net ... [  OK  ]
:: Loading module ixgbe ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module ipg ... [  OK  ]
:: Loading module jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading module sky2 ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading module pch_gbe ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading module qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading module netxen_nic ... [  OK  ]
:: Loading module sfc ... [  OK  ]
:: Loading module e1000 ... [  OK  ]
:: Loading module pcnet32 ... [  OK  ]
:: Loading module vmxnet3 ... [  OK  ]
:: Loading module bnx2 ... [  OK  ]
:: Loading module bnx2x ... [  OK  ]
:: Loading module igbvf ... [  OK  ]
:: Loading module ixgbevf ... [  OK  ]
:: Loading module r8101 ... [  OK  ]
:: Loading module r8125 ... [  OK  ]
:: Loading module r8169 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading module ax88179_178a ... [  OK  ]
:: Loading module button ... [  OK  ]
:: Loading module evdev ... [  OK  ]
:: Loading module atl2 ... [  OK  ]
:: Loading module e100 ... [  OK  ]
:: Loading module ixgb ... [  OK  ]
:: Loading module forcedeth ... [  OK  ]
:: Loading module tn40xx[    5.257040] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[    5.262100] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG
 ... [  OK  ]
:: Loading module cxgb ... [  OK  ]
:: Loading module cxgb3 ... [  OK  ]
:: Loading module cxgb4 ... [  OK  ]
:: Loading module atlantic ... [  OK  ]
:: Loading module bna ... [  OK  ]
:: Loading module vxge ... [  OK  ]
:: Loading module aqc111 ... [  OK  ]
:: Loading module asix ... [  OK  ]
:: Loading module cx82310_eth ... [  OK  ]
:: Loading module et131x ... [  OK  ]
:: Loading module i40e ... [  OK  ]
:: Loading module i40evf ... [  OK  ]
:: Loading module mcs7830 ... [  OK  ]
:: Loading module pegasus ... [  OK  ]
:: Loading module plusb ... [  OK  ]
:: Loading module r8152 ... [  OK  ]
:: Loading module rtl8150 ... [  OK  ]
:: Loading module s2io ... [  OK  ]
:: Loading module xgmac ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 1...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 2...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
[    9.151056] general protection fault: 0000 [#1] SMP
[    9.152019] Modules linked in: xgmac(F) s2io(F) rtl8150(F) r8152(OF) plusb(F) pegasus(F) mcs7830(F) i40evf(OF) i40e(OF) et131x(FC) cx82310_eth(F) asix(F) aqc111(OF) vxge(F) bna(F) atlantic(OF) cxgb4(F) cxgb3(F) cxgb(F) tn40xx(OF) forcedeth(F) ixgb(F) e100(F) atl2(F) evdev(F) button(F) ax88179_178a(F) usbnet(F) tg3(F) r8169(OF) r8125(OF) r8101(OF) ixgbevf(OF) igbvf(OF) bnx2x(F) bnx2(F) vmxnet3(F) pcnet32(F) e1000(F) sfc(F) netxen_nic(F) qlge(F) qlcnic(F) qla3xxx(F) pch_gbe(F) ptp_pch(F) sky2(F) skge(F) jme(F) ipg(F) uio(F) alx(F) atl1c(F) atl1e(F) atl1(F) libphy(F) mii(F) libcrc32c(F) r8168(OF) ixgbe(OF) be2net(F) igb(OF) i2c_algo_bit e1000e(OF) dca(F) vxlan ip_tunnel vfat fat mdio(F) crc_itu_t(F) crc_ccitt(F) sg etxhci_hcd ata_piix(F) nvme(F) hpsa(F) isci(F) arcmsr(OF) mvsas(F) mvumi(F) 3w_xxxx(F) 3w_sas(F) 3w_9xxx(F) aic94xx(F) aacraid(F) sx8(F) mpt2sas(OF) megaraid_sas(F) mptctl(F) mptsas(F) mptspi(F) mptscsih(F) mptbase(F) megaraid(F) megaraid_mbox(F) megaraid_mm(F) vmw_pvscsi(F) BusLogic(F) scsi_transport_spi(F) usb_storage xhci_hcd uhci_hcd ohci_hcd(F) ehci_pci(F) ehci_hcd(F) usbcore usb_common ubo(OF) [last unloaded: i2c_i801]
[    9.152019] CPU: 5 PID: 0 Comm: swapper/5 Tainted: PF        CIO 3.10.105 #25426
[    9.152019] Hardware name: AberdeenLLC AberNAS52XX/DSBF-D, BIOS 1003.002 05/22/2007
[    9.152019] task: ffff8808179e0800 ti: ffff880817a0c000 task.ti: ffff880817a0c000
[    9.152019] RIP: 0010:[<ffffffff814cde35>]  [<ffffffff814cde35>] _raw_spin_lock+0x5/0x30
[    9.152019] RSP: 0018:ffff88083fd43e78  EFLAGS: 00010046
[    9.152019] RAX: 0000000000000100 RBX: ffffffff81702397 RCX: 0000000000000000
[    9.152019] RDX: ffff88081496c6e8 RSI: 000000007fffffff RDI: 73637369646c2f79
[    9.152019] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8808147f0c80
[    9.152019] R10: 0000003565deda0b R11: 0000000000000000 R12: ffff88081496c6e8
[    9.152019] R13: ffff88083c169a00 R14: 0000000000000010 R15: 0000000000000010
[    9.152019] FS:  0000000000000000(0000) GS:ffff88083fd40000(0000) knlGS:0000000000000000
[    9.152019] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    9.152019] CR2: 00007f4d0a3ab558 CR3: 000000000180e000 CR4: 00000000000007e0
[    9.152019] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    9.152019] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    9.152019] Stack:
[    9.152019]  ffffffff8104b1dd 0000000000000002 ffff880817a0fe58 ffffc900011c8030
[    9.152019]  ffff880814968510 0000000000000059 ffff88081496c6e8 ffffffff8104b34d
[    9.152019]  0000000000000001 ffffffffa0263161 0000000000000082 ffffffff8105547c
[    9.152019] Call Trace:
[    9.152019]  <IRQ>
[    9.152019]  [<ffffffff8104b1dd>] ? __queue_work+0x11d/0x270
[    9.152019]  [<ffffffff8104b34d>] ? queue_work_on+0x1d/0x30
[    9.152019]  [<ffffffffa0263161>] ? arcmsr_interrupt+0x651/0x710 [arcmsr]
[    9.152019]  [<ffffffff8105547c>] ? __hrtimer_start_range_ns+0x1dc/0x330
[    9.152019]  [<ffffffff810a02c9>] ? handle_irq_event_percpu+0x89/0x130
[    9.152019]  [<ffffffff810a039c>] ? handle_irq_event+0x2c/0x50
[    9.152019]  [<ffffffff810a2a4e>] ? handle_edge_irq+0x5e/0x120
[    9.152019]  [<ffffffff810045a5>] ? handle_irq+0x15/0x30
[    9.152019]  [<ffffffff81004230>] ? do_IRQ+0x40/0xb0
[    9.152019]  [<ffffffff814ce29f>] ? common_interrupt+0x15f/0x15f
[    9.152019]  <EOI>
[    9.152019]  [<ffffffff8100a9f0>] ? arch_remove_reservations+0x110/0x110
[    9.152019]  [<ffffffff8100a9f2>] ? default_idle+0x2/0x10
[    9.152019]  [<ffffffff8100b0e5>] ? arch_cpu_idle+0x5/0x20
[    9.152019]  [<ffffffff810790ed>] ? cpu_startup_entry+0x7d/0x160
[    9.152019]  [<ffffffff814c2dec>] ? start_secondary+0x222/0x224
[    9.152019] Code: 66 0f 1f 44 00 00 8d 8a 00 01 00 00 89 d0 f0 66 0f b1 0f 66 39 d0 75 e5 b8 01 00 00 00 c3 0f 1f 84 00 00 00 00 00 b8 00 01 00 00 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 10 0f 1f 80 00 00 00 00 f3 90
[    9.152019] RIP  [<ffffffff814cde35>] _raw_spin_lock+0x5/0x30
[    9.152019]  RSP <ffff88083fd43e78>
[    9.152019] ---[ end trace 3d494cfb35245d99 ]---
[    9.152019] Kernel panic - not syncing: Fatal exception in interrupt

 

Share this post


Link to post
Share on other sites
48 minutes ago, IG-88 said:

usually its not booting at all when its uefi without csm

 

This MB doesnt have UEFI capability.

Share this post


Link to post
Share on other sites

For the record, I have the ability to allow you access to the console, virtual media and the whole platform remotely.

IF you're up for it at some point.

 

I also could be talked into putting a $ bounty on this.

Share this post


Link to post
Share on other sites
Posted (edited)
15 minutes ago, Sniper_X said:

For the record, I have the ability to allow you access to the console, virtual media and the whole platform remotely.

no, i dont want to mess up other pr

 

Quote

I also could be talked into putting a $ bounty on this.

no, i'm not taking any money its just for fun and if there ever would be legal trouble with synology i can honestly say i never did anything to my advantage or for money

 

ok last one for today, its a very stripped down rc.modules if any driver interferes its most likely not loaded,intel nic's should still work, storage its just what synology does ootb and your driver

http://s000.tinyupload.com/?file_id=09325595787432617637

 

18 minutes ago, Sniper_X said:

I have a number of ARECA drivers for various *IX variants.

including sources.

 

I'll try to attach.

 

7_2 is the same as what i already compiled and the others are just precompiled for some linux distributions

Edited by IG-88

Share this post


Link to post
Share on other sites

Xpenology hates my gear :(

=====================================================

                   GNU GRUB  version 2.02~beta2-36ubuntu3.14

 +----------------------------------------------------------------------------+
 |*DS3617xs 6.2 Baremetal with Jun's Mod v1.03b                               |
 | DS3617xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall                     |
 | DS3617xs 6.2 VMWare/ESXI with Jun's Mod v1.03b                             |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 +----------------------------------------------------------------------------+

      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, `e' to edit the commands
      before booting or `c' for a command-line.
   The highlighted entry will be executed automatically in 0s.
patching file etc/rc
Hunk #1 succeeded at 184 (offset 13 lines).
patching file etc/synoinfo.conf
Hunk #1 FAILED at 291.
1 out of 1 hunk FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #1 FAILED at 39.
Hunk #2 succeeded at 131 (offset 32 lines).
Hunk #3 succeeded at 694 (offset 179 lines).
1 out of 3 hunks FAILED -- saving rejects to file linuxrc.syno.rej
patching file usr/sbin/init.post
cat: can't open '/etc/synoinfo_override.conf': No such file or directory
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ehci-hcd ... [  OK  ]
:: Loading module ehci-pci ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module uhci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module arcmsr ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
All disk ready or timeout execeed
Exit on error [12] /dev/md0 is not ready(status: clear), go to junior mode....
Sun Jul 26 00:48:01 UTC 2020
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=16469476k,nr_inodes=4117369,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 12
starting pid 5002, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [  OK  ]
:: Loading module crc-ccitt ... [  OK  ]
:: Loading module crc-itu-t ... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module ip_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module dca ... [  OK  ]
:: Loading module e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb ... [  OK  ]
:: Loading module be2net ... [  OK  ]
:: Loading module ixgbe ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading module pch_gbe ... [  OK  ]
:: Loading module e1000 ... [  OK  ]
:: Loading module igbvf ... [  OK  ]
:: Loading module ixgbevf ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading module button ... [  OK  ]
:: Loading module evdev ... [  OK  ]
:: Loading module e100 ... [  OK  ]
:: Loading module ixgb ... [  OK  ]
:: Loading module tn40xx[    4.873338] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[    4.878412] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG
 ... [  OK  ]
:: Loading module i40e ... [  OK  ]
:: Loading module i40evf ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 1...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 2...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
[    8.991044] general protection fault: 0000 [#1] SMP
[    8.992023] Modules linked in: i40evf(OF) i40e(OF) tn40xx(OF) ixgb(F) e100(F) evdev(F) button(F) usbnet(F) tg3(F) ixgbevf(OF) igbvf(OF) e1000(F) pch_gbe(F) ptp_pch(F) libphy(F) mii(F) libcrc32c(F) r8168(OF) ixgbe(OF) be2net(F) igb(OF) i2c_algo_bit e1000e(OF) dca(F) vxlan ip_tunnel vfat fat mdio(F) crc_itu_t(F) crc_ccitt(F) sg etxhci_hcd arcmsr(OF) scsi_transport_spi(F) usb_storage xhci_hcd uhci_hcd ohci_hcd(F) ehci_pci(F) ehci_hcd(F) usbcore usb_common xxlloualdxxuxx(OF) [last unloaded: i2c_i801]
[    9.019661] CPU: 3 PID: 0 Comm: swapper/3 Tainted: PF         IO 3.10.105 #25426
[    9.019661] Hardware name: AberdeenLLC AberNAS52XX/DSBF-D, BIOS 1003.002 05/22/2007
[    9.019661] task: ffff8808179d2800 ti: ffff880817a04000 task.ti: ffff880817a04000
[    9.019661] RIP: 0010:[<ffffffff814cde35>]  [<ffffffff814cde35>] _raw_spin_lock+0x5/0x30
[    9.019661] RSP: 0018:ffff88083fcc3e78  EFLAGS: 00010046
[    9.019661] RAX: 0000000000000100 RBX: ffffffff81702397 RCX: 0000000000000000
[    9.019661] RDX: ffff8808152246e8 RSI: 000000007fffffff RDI: 73637369646c2f79
[    9.019661] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8808137744c0
[    9.019661] R10: 000000355314e42f R11: 0000000000000000 R12: ffff8808152246e8
[    9.019661] R13: ffff88083c169a00 R14: 0000000000000010 R15: 0000000000000010
[    9.019661] FS:  0000000000000000(0000) GS:ffff88083fcc0000(0000) knlGS:0000000000000000
[    9.019661] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    9.019661] CR2: 00007fcefce059f8 CR3: 000000000180e000 CR4: 00000000000007e0
[    9.019661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    9.019661] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    9.019661] Stack:
[    9.019661]  ffffffff8104b1dd 0000000000000002 ffff880817a07e58 ffffc90000074030
[    9.019661]  ffff880815220510 0000000000000059 ffff8808152246e8 ffffffff8104b34d
[    9.019661]  0000000000000001 ffffffffa00b6161 0000000000000082 ffffffff8105547c
[    9.019661] Call Trace:
[    9.019661]  <IRQ>
[    9.019661]  [<ffffffff8104b1dd>] ? __queue_work+0x11d/0x270
[    9.019661]  [<ffffffff8104b34d>] ? queue_work_on+0x1d/0x30
[    9.019661]  [<ffffffffa00b6161>] ? arcmsr_interrupt+0x651/0x710 [arcmsr]
[    9.019661]  [<ffffffff8105547c>] ? __hrtimer_start_range_ns+0x1dc/0x330
[    9.019661]  [<ffffffff810a02c9>] ? handle_irq_event_percpu+0x89/0x130
[    9.019661]  [<ffffffff810a039c>] ? handle_irq_event+0x2c/0x50
[    9.019661]  [<ffffffff810a2a4e>] ? handle_edge_irq+0x5e/0x120
[    9.019661]  [<ffffffff810045a5>] ? handle_irq+0x15/0x30
[    9.019661]  [<ffffffff81004230>] ? do_IRQ+0x40/0xb0
[    9.019661]  [<ffffffff814ce29f>] ? common_interrupt+0x15f/0x15f
[    9.019661]  <EOI>
[    9.019661]  [<ffffffff8100a9f0>] ? arch_remove_reservations+0x110/0x110
[    9.019661]  [<ffffffff8100a9f2>] ? default_idle+0x2/0x10
[    9.019661]  [<ffffffff8100b0e5>] ? arch_cpu_idle+0x5/0x20
[    9.019661]  [<ffffffff810790ed>] ? cpu_startup_entry+0x7d/0x160
[    9.019661]  [<ffffffff814c2dec>] ? start_secondary+0x222/0x224
[    9.019661] Code: 66 0f 1f 44 00 00 8d 8a 00 01 00 00 89 d0 f0 66 0f b1 0f 66 39 d0 75 e5 b8 01 00 00 00 c3 0f 1f 84 00 00 00 00 00 b8 00 01 00 00 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 10 0f 1f 80 00 00 00 00 f3 90
[    9.019661] RIP  [<ffffffff814cde35>] _raw_spin_lock+0x5/0x30
[    9.019661]  RSP <ffff88083fcc3e78>
[    9.019661] ---[ end trace 3df13d0a073a464f ]---
[    9.019661] Kernel panic - not syncing: Fatal exception in interrupt

 

Share this post


Link to post
Share on other sites

I think the Areca controller is more specifically the part that is not playing well with current DSM images.  The rest of the system seems like it should work fine. So you have the choice to find another more compatible controller, or if Areca is supported by ESXi, install on that, then RDM the drives into DSM (a little bit labor intensive but equally functional)

Share this post


Link to post
Share on other sites
Just now, flyride said:

I think the Areca controller is more specifically the part that is not playing well with current DSM images.  The rest of the system seems like it should work fine. So you have the choice to find another more compatible controller, or if Areca is supported by ESXi, install on that, then RDM the drives into DSM (a little bit labor intensive but equally functional)

 

You know that's an interesting idea.

Especially considering i cant use the console anyway.

I may also pass through the 10Gbit NICS - hmmmmm

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

you can also try it with dsm 6.1 / loader 1.02b but that would be a dead end when it comes to updates

Edited by IG-88

Share this post


Link to post
Share on other sites

Okay so I stuck an ADAPTEC 52445 controller in.

I was hoping (perhaps needlessly) that it would just "SPRING" to life and show me the 24 drives.

 

NOPE.

 

Now I begin the process of trying other EXTRA.LZMA files and also setting up JBOD vs. 24 separate RAID0 sets.

 

I'll keep my eye on my email for notifications in case anyone has an idea on what gets me to the finish line quickest.

Share this post


Link to post
Share on other sites
On 8/8/2020 at 2:06 AM, Sniper_X said:

Okay so I stuck an ADAPTEC 52445 controller in.

I was hoping (perhaps needlessly) that it would just "SPRING" to life and show me the 24 drives.

 

1 - Did you see any drives at all? (depending on your bootloader, there is a limit of 12/16 drives (out of the box)).

2 - Does this card support IT mode?

Share this post


Link to post
Share on other sites
7 hours ago, bearcat said:

 

1 - Did you see any drives at all? (depending on your bootloader, there is a limit of 12/16 drives (out of the box)).

2 - Does this card support IT mode?

 

1 - No drives at all.

2 - IT mode?  I don't know what the acronym means, but I did try RAID0 with just one disk and also JBOD on each disk.

 

Finally, dmesg doesn't show evidence of the card at all.

Share this post


Link to post
Share on other sites
2 hours ago, Sniper_X said:

IT mode?  I don't know what the acronym means

 

initiator target mode, its from scsi/sas

 

 

2 hours ago, Sniper_X said:

, but I did try RAID0 with just one disk and also JBOD on each disk.

 

might also be called direct mode, it a mode where every disk can be seen as a single disk from the system

 

2 hours ago, Sniper_X said:

Finally, dmesg doesn't show evidence of the card at all.

 

there should at least be a pcie device with vid/pid  in dmesg or with lspci

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.