Jump to content
XPEnology Community

DSM 6.2.3-25426 Update 2


Ermite
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes, v0.11 for 6.2.3, applied during reboot (previously using extra.lzma v0.5 for 6.2.2)

- Installation type:  BAREMETAL - ASRock Q1900-ITX + Intel PRO/1000 PCIe (8086:107d)

- Additional comments: Update via DSM GUI. Reboot required.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455-ITX

- Additional comments: Auto update, Reboot required. Very long startup time, at least 20mins before system was usable. Reboot times are also around 10mins

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: JUN'S LOADER v1.03b DS3617XS (modified to MBR only)

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel DQ77KB - 3470 + Intel Core i5-3470T + Samsung mSATA 256GB (MZMTE256HMHP-000L1)

- Additional comments: Update via DSM GUI. 10 mins. Reboot required.

Link to comment
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: JUN'S LOADER v1.03b DS3617XS

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox  6.2-4

- Additional comments: Update file is probably corrupted (error on screenshot)

 

- Update: SUCCESSFUL after using flyride's script from this post: https://xpenology.com/forum/topic/28183-running-623-on-esxi-synoboot-is-broken-fix-available

 

DSM-BKP - Synology DiskStation 2020-08-20 22-04-30.png

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte H270N Wi-Fi, Intel i3 7100T

- Additional comments: Reboot required - Needed modified extra.lzma and extra2.lzma for hardware transcoding (i915 driver - /dev/dri/ was missing)

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM DSM 6.2.3-25426

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: Yes, v0.13.3 for 6.2.3 by IG-88 

- Installation type: BAREMETAL - J4105-ITX + 8GB RAM

- Additional Notes: With the powerbutton fix installed, didn't encounter any trouble with the reboot. Came up just fine after the update. HW Accel also working on first boot.

Link to comment
Share on other sites

On 7/28/2020 at 5:00 PM, Kryper said:

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: VM - VMWare Fusion 11.5.3 High Sierra

- Additional Comment: Auto and Manual, File corrupt, impossible to install, even with a proper restart. Didn't try FixSynoboot.sh

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: VM - VMWare Fusion 11.5.3 High Sierra

- Additional Comment: Need FixSynoboot.sh, automatic install, reboot.

Link to comment
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: Yes

- Installation type: BAREMETAL Asrock J3455 mITX - 4GB ram

- Additional Comment: Auto and Manual, File corrupt, impossible to install, even with a proper restart. Tried fix FixSynoboot.sh but same problem

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox  6.2-4

- Additional Comment: Need FixSynoboot.sh, automatic install, reboot.

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL 2x

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen7 N54L | BAREMETAL - HP Microserver Gen7 N40L

- Additional comment : reboot required | Intel NIC


- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver  Gen7 N40L

- Additional comments:  Reboot required | Intel NIC | First Updated only to 6.2.3-25423 and was not able to perform UpDate 2 (failed update, file might be currupted) because I had a wrong VID/PID (which I didn't notice because installation and the 6.2.3 update went through)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Elite 8200, integrated NIC Intel 82579LM

- Additional comments: Computer needs to be booted in Legacy BIOS mode for network to work (since DSM 6.2).

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 Update 6

- Loader version and model: Jun's Loader v1.04b 918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Gigabyte B365M-DS3H, i5 8400, Realtek NIC

- Additional comment : System rebooted twice, updated from GUI.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: YES, before v0.5_test  -> after v0.11_test  + original zImage and rd.gz (extracted from Synology's 25426 PAT)

- Installation type: BAREMETAL - Intel Core i7-3770 16 GB P8H61-I R2.0

- Additional comment: Reboot required ... after that, the machine was "lost" (though booted fine, no network issue). After replace USB Flash Drive, extra.lzma v0.11_test, zImage and rd.gz from Synology's 25426 PAT everything is OK.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03b DS3617XS

- Using custom extra.lzma: YES, before v0.5_test  -> after v0.11.2_test

- Installation type: BAREMETAL - DFI LanPArty X38, Intel Core2 Duo E7500, 8GB RAM

- Additional comment: Reboot required ... after that, the machine was "lost" (though booted fine, no network issue). After replace USB Flash Drive, extra.lzma v0.11.2_test) everything looks OK.

 

Now i find netwotk issue when network is loaded:

Spoiler

[  210.868850] sky2 0000:04:00.0: error interrupt status=0x40000008
[  210.869455] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 724
[  210.869457] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 684
[  210.869460] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 684
[  210.869462] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 364
[  259.842648] sky2 0000:04:00.0: error interrupt status=0x40000008
[  259.842703] sky2 0000:04:00.0: error interrupt status=0x40000008
[  259.842756] sky2 0000:04:00.0: error interrupt status=0x40000008
[  259.842800] sky2 0000:04:00.0: error interrupt status=0x8
[  259.842932] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 340
[  259.842934] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 1132
[  259.842936] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 364
[  259.842938] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 1510
[  259.842944] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 804
[  259.842946] sky2 0000:04:00.0 eth0: rx error, status 0x7ffc0001 length 1260

 

 

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: 6.2.2-24922 Update 5

- Loader version and model: Juns v1.04b - DS918+

- Using custom extra.lzma: Yes - extra918plus_v0.13.3

- Installation type: BAREMETAL - GA-Z87X-UD5H, usb 2.5gbe

- Additional Comment: Manual to Update 6 then 6.2.3 and after that Update 2. Reboots, errors in dmesg about i915 and drm_helper that prompted the addition of IG-88s drivers.

Link to comment
Share on other sites

- Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25426

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB)

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: Jun's Loader v1.03B 3617XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Z220 Workstation, Xeon E3-1245-v2, integrated 82579lm NIC

- Additional comment : Reboot required, UEFI boot disabled in BIOS, JUN'S LOADER v1.03b Hybrid partition table usb key https://www.rodsbooks.com/gdisk/hybrid.html

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25426

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC

- Additional comment: Reboot required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: New Install

- Loader version and model: Juns v1.04b - DS918+

- Using custom extra.lzma: Yes - both extra/extra2 918+_v0.13 as per IG88

- Installation type: BAREMETAL - a2sdi-h-tf SuperMicro dual 10gbe, HP NC360T, UNAS build 8 x 4tb hdd and 4 x 1tb ssd plus optane cache ssd

- Additional Comment: modified both lzma to provide for default of 4 nic ports, injected rd.gz and zImage from PAT as per IG88

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3 - 25426
- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Supermicro X9SRH-7F, XEON E5-2690, 128GB ECC-RAM, LSI-9208-8i - IT Mode

- Additional comments: Reboot Required

Link to comment
Share on other sites

On 9/2/2020 at 8:10 PM, merve04 said:

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 Update 6

- Loader version and model: Jun's Loader v1.04b 918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Gigabyte B365M-DS3H, i5 8400, Realtek NIC

- Additional comment : System rebooted twice, updated from GUI.

Added IG88’s extra v0.13.3 to regain hw transcode in plex. 
That involved creating a new USB, adding the the 2 extra files and booting machine with new key, dsm recovered system and hw transcode worked again. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...