Bob1975 Posted July 23, 2020 Share #51 Posted July 23, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b DS3615xs - Using custom extra.lzma: No - Installation type: ESXi (with FixSynoboot.sh installed) Edited July 23, 2020 by Bob1975 after FixSynoboot.sh installation the update was succesful Quote Link to comment Share on other sites More sharing options...
jarugut Posted July 25, 2020 Share #52 Posted July 25, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: 2 x BAREMETAL - Dell Optiplex 790 - Additional comments: Reboot required - Outco me of the update: SUCCESSFUL - D SM version prior update: DSM 6.2.3-25426 - Lo ader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BARAMETAL - HP Microserver Gen8 - Additional comment : reboot required | Intel NIC | WOL works | PhpVirtualBox works - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen7 N54L - HP Microserver Gen7 N40L - Additional comments: reboot required | Intel NIC | WOL works | PhpVirtualBox works 3 Quote Link to comment Share on other sites More sharing options...
haosith Posted July 26, 2020 Share #53 Posted July 26, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 1 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: YES - Installation type: BAREMETAL - Additional comments: 2 reboots required, first 6.2.2=>6.2.3 where loader stuck because of custom extra.lzma, then I copied new extra.lzma from IG-88 (version 0.11.2), and it booted to 6.2.3, then it auto updated to 6.2.3-25426 Update 2 and rebooted. Quote Link to comment Share on other sites More sharing options...
Fulatins Posted July 26, 2020 Share #54 Posted July 26, 2020 (edited) Auto installation Outcome of the update: FAILED DSM version prior to update: DSM 6.2.3-25426 Update 1 Loader version and model: Jun v1.04b - DS918+ Using custom extra.lzma: NO Installation type: MSI B250M PRO-VDH / i3-7100 / 32 DDR4 2333 Additional comments: Node restarted but still "Fail to update the file. The file is probably corrupt." Manual installation Outcome of the update: FAILED DSM version prior to update: DSM 6.2.3-25426 Update 1 DSM downloaded from: https://archive.synology.com/download/DSM/criticalupdate/update_pack/25426-2/ Loader version and model: Jun v1.04b - DS918+ Using custom extra.lzma: NO Installation type: MSI B250M PRO-VDH / i3-7100 / 32 DDR4 2333 Additional comments: "Node restarted but still "Fail to update the file. The file is probably corrupt." Edited July 26, 2020 by Fulatins Quote Link to comment Share on other sites More sharing options...
IceBoosteR Posted July 26, 2020 Share #55 Posted July 26, 2020 - Outcome of the update: SUCCESFULL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Supermicro X10SLL-F, 32GB ECC RAM, Xeon E3-1270v3, 10GBit NIC Mellanox ConnectX-3, LSI SAS2008 IT-Mode - Additional comment: Reboot required, custom synoinfo Quote Link to comment Share on other sites More sharing options...
Wreid23 Posted July 27, 2020 Share #56 Posted July 27, 2020 (edited) - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 1 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: YES - Installation type: BAREMETAL - ASUS ROG STRIX Z390 I GAMING, Intel - Core i3-8100 3.6 GHz Quad-Core Processor - Additional comments: Reboot required Edited July 27, 2020 by Wreid23 missing text Quote Link to comment Share on other sites More sharing options...
jeromim Posted July 27, 2020 Share #57 Posted July 27, 2020 (edited) - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: ESXI 7.0 - Additional comments: Reboot required Edited July 27, 2020 by jeromim Quote Link to comment Share on other sites More sharing options...
marigo Posted July 27, 2020 Share #58 Posted July 27, 2020 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: Proxmox 6.2.6 VM - Additional comments: Used the FixSynoboot.sh to update Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 27, 2020 Share #59 Posted July 27, 2020 Attempt 2: - Outcome of the update: FAILED - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN8 - Additional comment: Auto Downloaded Via Synology GUI - Failed Again - Additional comment: Changed VID & PID Still No Luck Quote Link to comment Share on other sites More sharing options...
phinemaria Posted July 27, 2020 Share #60 Posted July 27, 2020 - Outco me of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BARAMETAL - HP Microserver Gen8 - Additional: no ESx, with FixSynoboot.sh installed Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted July 28, 2020 Share #61 Posted July 28, 2020 Attempt 3: Finally All 3 Updated - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN8 - Additional comment: Fixed VID & PID, Rebooted, Upgraded - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN8 - Additional comment: Fixed VID & PID, Rebooted, Upgraded - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - HP ProLiant MicroServer GEN8 - Additional comment: Fixed VID & PID, Rebooted, Upgraded Quote Link to comment Share on other sites More sharing options...
Fulatins Posted July 28, 2020 Share #62 Posted July 28, 2020 (edited) On 7/26/2020 at 2:53 PM, Fulatins said: Auto installation Outcome of the update: FAILED DSM version prior to update: DSM 6.2.3-25426 Update 1 Loader version and model: Jun v1.04b - DS918+ Using custom extra.lzma: NO Installation type: MSI B250M PRO-VDH / i3-7100 / 32 DDR4 2333 Additional comments: Node restarted but still "Fail to update the file. The file is probably corrupt." Manual installation Outcome of the update: FAILED DSM version prior to update: DSM 6.2.3-25426 Update 1 DSM downloaded from: https://archive.synology.com/download/DSM/criticalupdate/update_pack/25426-2/ Loader version and model: Jun v1.04b - DS918+ Using custom extra.lzma: NO Installation type: MSI B250M PRO-VDH / i3-7100 / 32 DDR4 2333 Additional comments: "Node restarted but still "Fail to update the file. The file is probably corrupt." Auto installation Outcome of the update: SUCCESS DSM version prior to update: DSM 6.2.3-25426 Update 1 Loader version and model: Jun v1.04b - DS918+ Using custom extra.lzma: NO Installation type: MSI B250M PRO-VDH / i3-7100 / 32 DDR4 2333 Additional comments: After FixSynoboot.sh script Edited July 28, 2020 by Fulatins Quote Link to comment Share on other sites More sharing options...
qwrty Posted July 28, 2020 Share #63 Posted July 28, 2020 On 7/22/2020 at 6:32 PM, qwrty said: - Outcome of the update: FAILED - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: No - Installation type: Debian 10 / Qemu 3.1.0 (Debian 1:3.1+dfsg-8+deb10u6) / Libvirt 5.0.0 - SuperMicro X11SSH-F (BIOS 2.3) / Intel E3-1275 v6 - Additional comment: File States Corrupt. Downloaded It A Few Times Do Not Know What is Going On, also Tried Manually. First failed update since I installed my VM 1 years ago. Seems fixed after installing FixBoot.sh more /etc.defaults/VERSION majorversion="6" minorversion="2" productversion="6.2.3" buildphase="GM" buildnumber="25426" smallfixnumber="2" builddate="2020/07/08" buildtime="06:14:27" Quote Link to comment Share on other sites More sharing options...
TomHC Posted July 28, 2020 Share #64 Posted July 28, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL Optiplex 3020 | i3-4160 | 8 GB RAM - Additional comments: Reboot required, had to apply FixSynoboot.sh script, without that "Fail to update the file. The file is probably corrupt." Quote Link to comment Share on other sites More sharing options...
Kryper Posted July 28, 2020 Share #65 Posted July 28, 2020 (edited) - Outcome of the update: FAILED - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: VMWare Fusion 11.5.3 High Sierra - Additional Comment: Auto and Manual, File corrupt, impossible to install, even with a proper restart. Didn't try FixSynoboot.sh Edited July 28, 2020 by Kryper 1 Quote Link to comment Share on other sites More sharing options...
sliders Posted July 28, 2020 Share #66 Posted July 28, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ / extra918plus_v0.8_recovery - Using custom extra.lzma: No - Installation type: BAREMETAL - HP Z240| i5-4590 | 8 GB RAM| HP NC360T - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
murile86 Posted July 28, 2020 Share #67 Posted July 28, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen7 N54L - Additional comments: reboot required | Quad Intel NIC | WOL works | PhpVirtualBox works Quote Link to comment Share on other sites More sharing options...
Rooster Posted July 28, 2020 Share #68 Posted July 28, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.23-25423 - Loader version and model: Jun's Loader v1.03B 3615XS - Using custom extra.lzma: No - Installation type: VM - Proxmox 6.1-8 - Supermicro X10SL7-F - E3-1246 v3 - Storage Disks using LSI 2308 PCI Device Pass-through - Additional comment : Using "FixSynoboot.sh" startup script. Reboot required. Quote Link to comment Share on other sites More sharing options...
MichelD Posted July 29, 2020 Share #69 Posted July 29, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV 3.30; 4GB RAM, 3 disks, onboard NIC RTL8111H - Additional comments: worked like a charm Quote Link to comment Share on other sites More sharing options...
PO-Box Posted July 29, 2020 Share #70 Posted July 29, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus P10S-M [Intel Xeon E1230 v6] + Lenovo ServeRAID M5110 (mod firmware for IT mode) - Additional comments: reboot required Fixed CPU usage is 100% (Docker package) 😀 Quote Link to comment Share on other sites More sharing options...
gquiring Posted July 29, 2020 Share #71 Posted July 29, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.23-25423 update 2 - Loader version and model: Jun's Loader v1.03B 3615XS - Using custom extra.lzma: No - Installation type: TheCUS N5550 - Additional comment : Reboot required Edited July 29, 2020 by gquiring Quote Link to comment Share on other sites More sharing options...
hellbondz Posted July 30, 2020 Share #72 Posted July 30, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.23-25423 - Loader version and model: Jun's Loader v1.03b 3615XS - Using custom extra.lzma: No - Installation type: Proxmox 6.2-10 - Additional comment : Intel 1000e, reboot required, some time ago i corrected VID & PID (it has to be proper now - simplest way is to connect loader as the usb drive to some Windows VM, the same way that you're connecting it to xpenology machine, and read it using for example this tutorial https://xpenology.club/read-vid-and-pid-usb-stick/ or any other tool of your choosing) Quote Link to comment Share on other sites More sharing options...
raeesumer Posted July 30, 2020 Share #73 Posted July 30, 2020 - Outcome of the Installation: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z390M-ITX/AC, Intel Core i7 8700, 16GB RAM on U-NAS 410 Chassis with Noctua NH-L9i CPU fan -Additional comments: Reboot Required Quote Link to comment Share on other sites More sharing options...
Iwanme Posted July 30, 2020 Share #74 Posted July 30, 2020 (edited) -Outcome of the update: SUCCESSFUL -DSM version prior to update: DSM 6.2.3-25426 -Loader version and model: Jun v1.04b - DS918+ -Using custom extra.lzma: NO -Installation type: Fujitsu Esprimo E720, i3-4170, 2GB DDR3 -Additional comments: After FixSynoboot.sh script Edited July 30, 2020 by Iwanme Quote Link to comment Share on other sites More sharing options...
zpantale Posted July 30, 2020 Share #75 Posted July 30, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE MicroServer Gen10 (P04923-S01) - Additional comments: 10Gtek(Intel) X520-DA1 SFP+ NIC working alongside internal GbE, Reboot Required Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.