Martino Posted January 31, 2015 Share #1 Posted January 31, 2015 Hello, I have an xpenology with an avoton c2750 and 6 disks. My nas was not behind UPS and power got cut off. After reboot 1 HDD were crashed and 3 HDD had system partition problems and my volume was degradated. The crashed drive was dead and even make other disk on the controller not boot on other reboot. I changed it for a new one (i also bought an ups) and system enter into parity check . All this time all my data was accessible When all was done i do another reboot (synology asked for it to do partition check) Reboot did nothing so i decided to reinstall DSM (with same version for now) Now my sytem is in a strange state like seen in the folowing screen : Everything seems ok and i can still access all my data but can i make thoses HDD not being crashed ? Link to comment Share on other sites More sharing options...
Martino Posted February 1, 2015 Author Share #2 Posted February 1, 2015 I managed to fix my problem. I moved one by the one disk from one slot to another. Then i add them to the volume (they were considered new disk in the new slot) It tooks nearly 2 days to complete. I decided to try updating to XPEnoboot and DSM 5.1 before re-installing all package i use. I followed xpenology.nl tutorial with : - XPEnoboot_DS3615xs_5.1-5022.1.img on my 8gb usb 2.0 - DSM_DS3615xs_5022.pat as dsm install file On the first reboot after installation DSM freeze on post init at step ==== trigger device plug event ==== I did a successful rollback to last 5.0 my config is : CPU + MB : ASRock C2750D4I Memory : 8 GO DDR3 PC12800 - CT2KIT51272BD160B HDD : 4* WD40EFRX and 2* STM31000340AS power supply : Strider ST30SF - 300W case : Silverstone DS380B (not really useful here ) Since DSM freeze before i don't if i can provide more data on the problem (seems not) Link to comment Share on other sites More sharing options...
Recommended Posts