Jump to content
XPEnology Community

Synology RS3413xs+ DSM 4.2-3211 x86


Recommended Posts

This is release can let your old x86 only box have chance to use DSM 4.2-3211 :cool:

 

Build Information:

 

================

Support NIC:

 

DSM 2.3 and 4.2: typhoon / b44 / e100 / 8139cp / 8139too / e1000 / e1000e / r8168 / r8169 / r8101 / skge / sky2 / sk98lin / tigon3 / bnx2 / atl1

DSM 4.2 only: atl1e / atl1c / igb / igbvf / jme / skge_genesis / vmxnet3

================

Support Controller:

 

DSM 2.3 and 4.2: sata_ahci / ata_piix / sata_mv / sata_promise / sata_sx4 / sata_sil / sata_sil24 / ata_generic / pata_hpt37x / pata_jmicron / pata_pdc2027x

DSM 4.2 only : pvscsi

================

Support Platform: Intel x86 CPU

================

 

How to Install:

 

01.Use RAW tool to write the "DS411-1067-x86-20130525.img" image file to your USB key (at least 16MB capacity).

02.Enable COM1 from BIOS then boot from USB key.

03.Select "Boot DSM 2.3-1167 x86" when the GRUB boot manager show up.

04.Search the DSM booting box by Synology Assistant (SA) and provide "DS411-1067-x86-20130525.pat" to SA.

05.DSM will auto reboot when .pat install done, the GRUB boot manager will show up again.

06.Select "Boot DSM 2.3-1167 x86" to complete the SA install process (Write configuration to DSM success).

07.Login into DSM from Web UI, create the HDD volume/space you want. (the SA will show the DSM version as 1.0.1000 now)

 

*.Very Important: You must create HDD volume/space at the step.

 

08.Reboot DSM when step.07 finish, select "Boot DSM 2.3-1167 x86" again when GRUB show up.

09.Search DSM by SA, SA will show "configuration lost" and ask to provide the .pat file, give "RS3413xs_3211-x86-20130525.pat" to SA.

10.The step.05 repeating now.

11.Select "Boot DSM 2.3-1167 x86" again when GRUB show up, the DSM 4.2 .pat file will install during this step.

On this step, we just want to the "RS3413xs_3211-x86-20130525.pat" wrote to HDD.

So press the computer "Reset" manaully when the screen continue show up "== Philippines Coast Guard massacred Taiwan finishing boat on 2013-05-19 ==".

 

*.It's really, no matter press "Reset" or the VGA console messages.

 

12.When the GRUB show up again, select "Boot DSM 4.2-3211 x86", the SA will finish the install process. (Write configuration to DSM success).

13.Login into DSM 4.2 Web UI and start to setup your DSM.

14.All done and enjoy it.

 

================

 

*.Very Important: You can't delete the HDD volume/space in DSM 4.2, otherwise need to go again the installation process.

Another words, the HDD volume layout must all finish in Step.07, and the file system will be EXT3.

 

Download URL: DEAD Link

EDIT Trantor : I reupload the file viewtopic.php?f=2&t=800&start=100#p6739

Example1.jpg.eefb3188f9c87805afe83af9e871df5d.jpg

Example2.jpg.0e9288caf209b3b567d5d6a3778f74eb.jpg

RS3413xs_3211_x86_P3.jpg.c465263a0537804f73af3217bfcda5a6.jpg

Link to comment
Share on other sites

Is not working in Virtualbox x86..After format and install DSM, display error 22 and no boot.

 

Error 22 means the boot disk (GRUB) is damaged.

 

Virtualbox> DSM2.3 install> Error22> replace the vdi again> boot (2.3)>install DSM 4 > Error 22> Install DSM4...error 22..keep looping..

Link to comment
Share on other sites

Can install on N54L?

 

my N54L now is DSM4.2-3202

want upgrade to 3211

 

but how to upgrade?

i don't want reinstall because now have data in DSM4.2-3202

 

need to build the new one img boot loader for N54L??

 

your boot loader can not new install 2.1 on N54L & install 4.2-3211

Link to comment
Share on other sites

Can install on N54L?

 

my N54L now is DSM4.2-3202

want upgrade to 3211

 

but how to upgrade?

i don't want reinstall because now have data in DSM4.2-3202

 

need to build the new one img boot loader for N54L??

 

your boot loader can not new install 2.1 on N54L & install 4.2-3211

 

This version 3211 is for x86_32 bits only, do you really need a 32 bits version of DSM ? I don't think so.

 

And do you even know what is the changes list between 3202 and 3211 ? If your installation is clean and stable, why do you want to update it ? :mrgreen:

 

Just wait few days/week, a new release will be published soon (not yet published by Synology in SourceForge).

Link to comment
Share on other sites

The x86 version limit Memory size 4GB, And Onwer provide method is from 411+ upgrade to RS3613sx+

in my LAB , ASUS Z77-V or H77-V and X79 /Hyper-V/ESXi , Need one USB 4GB and 2 HDD ...

 

E1000 (1000MT/PT/CT/82579/82577 LE) is Support..

My CPU is XEON 1245 V2

Link to comment
Share on other sites

When trying to install after first reboot I boot to DSM 2.3 again (step 6). It then goes through the process of writing the configuration files and shows "== Philippines Coast Guard massacred Taiwan finishing boat on 2013-05-19 ==" a few times then invalid HDD 11 and invalid HDD 12, only one drive is connected during this. Then the system "kills" and just shuts down the machine. It never gives me a change to log in to webUI. Am I missing something?

Link to comment
Share on other sites

When trying to install after first reboot I boot to DSM 2.3 again (step 6). It then goes through the process of writing the configuration files and shows "== Philippines Coast Guard massacred Taiwan finishing boat on 2013-05-19 ==" a few times then invalid HDD 11 and invalid HDD 12, only one drive is connected during this. Then the system "kills" and just shuts down the machine. It never gives me a change to log in to webUI. Am I missing something?

 

Enable your com1 in bios and try again

Link to comment
Share on other sites

Hi, Guys

About odie82544 Provide the Image and DS411 upgrade to RS3413xs+

Maybe can refer my steps(I can't join NAS1/CN, So only Sharing in here)

Prepare one USB Key (32MB~8GB) and 2 HDD(must hvae 2 Hard DISK) connect to MB

(Any MainBoard ASUS P43TD/P43TDPRO/P8Z77-V/P9X79/P8H77-V)

All load from UEFI BIOS Default setting

HDD ID0 IDE/SATA/SAS 4.3G~120G(also use USB KEY and Force set type is HDD)

HDD ID1 IDE/SATA/SAS 40G~120G

 

Steps

01.Download win32diskimager-v0.7-binary .zip or win32diskimager-v0.6-binary.zip /HD RAW Tool

02.install Download tool and write the "DS411-1067-x86-20130525.img" image file to your USB key (at least 16MB capacity).

03.Boot from USB Key , and Select "Boot DSM 2.3-1167 x86" when the GRUB boot manager show up.

04. when show up "DiskStation login" afer waiting 10~20 sec (all services and network/DHCP is finish status).

05.Search the DSM booting box by Synology Assistant (SA) and provide "DS411-1067-x86-20130525.pat" to SA.(Do'nt create SHR/IP)

06.DSM will auto reboot when .pat install done, the GRUB boot manager will show up again.

07.Select "Boot DSM 2.3-1167 x86" to complete the SA install process (Write configuration to DSM success).and SA show DiskStation Login URL)

08.waiting 30sec ,Login into DSM from Web UI, create the HDD volume/space you want. (the SA will show the DSM version as 1.0.1000 now)

*.Very Important: You must create HDD volume/space at the step.

09.Reboot DSM when step.07 finish, select "Boot DSM 2.3-1167 x86" again when GRUB show up.

10.Search DSM by SA, SA will show "configuration lost" and ask to provide the .pat file, give "RS3413xs_3211-x86-20130525.pat" to SA.

11.When SA show reboot

12.Select "Boot DSM 2.3-1167 x86" again when GRUB show up, the DSM 4.2 .pat file will install during this step. (show 600sec ...599 sec...to 0sec)

(after 0sec , The SA is will run next step...)

13. On this step , Only waiting, we just want to the "RS3413xs_3211-x86-20130525.pat" wrote to HDD.

14. the step to 100% will show Fail, is timeout or failed message on your SA screen.

15. maybe show up ""== Philippines Coast Guard massacred Taiwan finishing boat on 2013-05-19 =="" , or not show the message (Maybe Show HDD 11 HDD 12 some message)

16. Force press Reset button.

17.When the GRUB show up again, select "Boot DSM 4.2-3211 x86", the SA will finish the install process. (Write configuration to DSM success).

13.Login into DSM 4.2 Web UI and start to setup your DSM.

14. Del first time create ShareVolume ,the tune off power, Remove HDD No2 , install new DISK (2TB*8)

15. Power On. select from "Boot DSM 4.2-3211 x86",then login DSM 4.2

16. Create new Volume/change admin password and enjoy it.

 

 

I am Mars , I am come from Taiwan

Link to comment
Share on other sites

Hi, Guys

About odie82544 Provide the Image and DS411 upgrade to RS3413xs+

Maybe can refer my steps(I can't join NAS1/CN, So only Sharing in here)

Prepare one USB Key (32MB~8GB) and 2 HDD(must hvae 2 Hard DISK) connect to MB

(Any MainBoard ASUS P43TD/P43TDPRO/P8Z77-V/P9X79/P8H77-V)

All load from UEFI BIOS Default setting

HDD ID0 IDE/SATA/SAS 4.3G~120G(also use USB KEY and Force set type is HDD)

HDD ID1 IDE/SATA/SAS 40G~120G

 

Thanks, but the major issues about unable to change the volume, were because of lots of hdd/volume utility are for x64, this is the root cause.

I had manual change file system to ext4 success by recompiler some programs in DSM.

Link to comment
Share on other sites

Hi odie82544

 

在使用您提供的X86版本後,我試著用您的方式.裝不起來..

所以測試了2天後,是用這樣子的方法裝起來的..不管在那家的主機版上..

都可以隨時移除.重新建立新的儲存空間..及增加HD

 

方便的話,您可以私息給我您的IP.我可以讓您進來看我的環境..SSH/TELNET/DSM UI

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...