Jump to content
XPEnology Community

Sources, Compiling and drivers


Schnapps
 Share

Recommended Posts

Hi guys,

 

I switched from FreeNAS to XPEnology and i am really happy that i found this project. I will be thrilled to use the following additional hardware that doesn't work now:

  • APC UPS Back UPS ES 700 with USBtoSerial connection
    ASIX AX88179 USB 3.0 10/100/1000 LAN Adapter
    Silicon Image SiI3114 PCI SATA 4 CHANNEL (2 EXT + 4 INT PORTS ) RAID CARD

 

As OS, i am using the following:

  • Linux nas 3.2.30 #3202 SMP Fri Mar 1 01:03:15 CST 2013 x86_64 GNU/Linux synology_bromolow_3612xs

 

And this is some additional information about the system:

  • lsusb

bash-3.2# lsusb
Bus 003 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 001 Device 003: ID 0b95:1790 ASIX Electronics Corp.
Bus 001 Device 002: ID 1307:0165 Transcend Information, Inc.
Bus 001 Device 001: ID 1d6b:0002

 

 

  • output from cat /proc/bus/usb/devices

 

bash-3.2# cat /proc/bus/usb/devices

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.02
S:  Manufacturer=Linux 3.2.30 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:16.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 5
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.02
S:  Manufacturer=Linux 3.2.30 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:13.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 5
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.02
S:  Manufacturer=Linux 3.2.30 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:12.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1307 ProdID=0165 Rev= 1.00
S:  Manufacturer=USBest Technology
S:  Product=USB Mass Storage Device
S:  SerialNumber=18281630061042020017
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=16ms

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0b95 ProdID=1790 Rev= 1.00
S:  Manufacturer=ASIX Elec. Corp.
S:  Product=AX88179
S:  SerialNumber=00803F5D09067F
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=248mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=128ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

 

I documented a bit, i'm no novice in linux but i'm also no specialist or expert. I don't do code but i can understand it.

 

Anyhow, it seems that i need something that i can't find anymore published, meaning:

  • the bromolow x64 3203branch from the Synology NAS GPL Source
    or the bromolow x64 3202branch from the Synology NAS GPL Source

and the

  • Intel x64 Linux 3.2.30 (Bromolow) DSM 4.2 Tool Chains

 

Please help me :wink:

 

Thanks!

Link to comment
Share on other sites

 Share

×
×
  • Create New...