spiderben25

MyDS Center not working on 5.1 XPEnoboot

Recommended Posts

Hi,

I would like to know if I'm the only one having this problem, and if not, if there is some sort of fix for that.

It's impossible to connect to MyDS Center on 5.1 (XPEnoboot), it says there has been an unknown error. Therefore, it's impossible to use Quickconnect or DDNS.

Prior to upgrading to 5.1 (I was on 5.0 nanoboot), it worked properly, and I didn't change my password or anything else.

 

Thanks for any informations on this matter.

Share this post


Link to post
Share on other sites
Hi,

I would like to know if I'm the only one having this problem, and if not, if there is some sort of fix for that.

It's impossible to connect to MyDS Center on 5.1 (XPEnoboot), it says there has been an unknown error. Therefore, it's impossible to use Quickconnect or DDNS.

Prior to upgrading to 5.1 (I was on 5.0 nanoboot), it worked properly, and I didn't change my password or anything else.

 

Thanks for any informations on this matter.

Change a serial number.

Share this post


Link to post
Share on other sites

I have a problem too, after upgrade it was ok, but now, after reboot it looks like it doesn't mount hdds. When i login it shows me 2 information messages - synostoraged, synobackupd, hotplugd cannot run, and the system was shutdown improperly. What i have to try?....

Share this post


Link to post
Share on other sites
Hi,

I would like to know if I'm the only one having this problem, and if not, if there is some sort of fix for that.

It's impossible to connect to MyDS Center on 5.1 (XPEnoboot), it says there has been an unknown error. Therefore, it's impossible to use Quickconnect or DDNS.

Prior to upgrading to 5.1 (I was on 5.0 nanoboot), it worked properly, and I didn't change my password or anything else.

 

Thanks for any informations on this matter.

Change a serial number.

Already tried that, doesn't work...

Share this post


Link to post
Share on other sites
I have a problem too, after upgrade it was ok, but now, after reboot it looks like it doesn't mount hdds. When i login it shows me 2 information messages - synostoraged, synobackupd, hotplugd cannot run, and the system was shutdown improperly. What i have to try?....

 

Got exactly the same problem. I posted the info in xpenoboot thread ( viewtopic.php?f=2&t=5026&start=70#p29692 ). Maybe you can post your info there too.

Share this post


Link to post
Share on other sites

Strange...

i got it working. Changed the serial and mac address in syslinux.cfg

i've an original serial from an old ds109j

Share this post


Link to post
Share on other sites
Strange...

i got it working. Changed the serial and mac address in syslinux.cfg

i've an original serial from an old ds109j

I don't have original serial, i tried to change for just numbers and letters? and its not working. and i don't know how to change mac address...

Share this post


Link to post
Share on other sites

i also tried it with different serials about a year ago, but never got it working. Maybe Synology updated database to make quickconnect more secure. after sn=1532456 make mac1=0011223344BBFF or something. if you have more NICs you just can add mac2= mac3= and mac4=

if you really want it working you can maybe buy on ebay or something an old and broken Synology to have original serial number.

Share this post


Link to post
Share on other sites

to make clear, i've something like this:

APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B845R4565 mac1=0011223344BBFF vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305

After mac1= you can add mac2= and so on.

Share this post


Link to post
Share on other sites
I have a problem too, after upgrade it was ok, but now, after reboot it looks like it doesn't mount hdds. When i login it shows me 2 information messages - synostoraged, synobackupd, hotplugd cannot run, and the system was shutdown improperly. What i have to try?....

 

Got exactly the same problem. I posted the info in xpenoboot thread ( viewtopic.php?f=2&t=5026&start=70#p29692 ). Maybe you can post your info there too.

 

I have the same problem ,my volumes disapeared and my setting too

This has nothing to do with serial or MAC. I never have changed them and it allways worked fine. Off course i couldn t use quickconnect or DNS from synology ( this are only for real synology nas)

Yesterday after ugrading all was ok :sad::sad:

Share this post


Link to post
Share on other sites
to make clear, i've something like this:

APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B845R4565 mac1=0011223344BBFF vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305

After mac1= you can add mac2= and so on.

Thanks, ill try

Share this post


Link to post
Share on other sites

Hi there, everything seems to be working fine including my quick connect on a bare metal machine, but just a quick question about changeing the serial and MAC address.

 

I have set up a synology account with this serial and mac, but I don't own the original box. Is my data still safe ? It's just to put my mind at ease that's all. Don't want my machines quick connect showing up on a friends account lol

Share this post


Link to post
Share on other sites
to make clear, i've something like this:

APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B845R4565 mac1=0011223344BBFF vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305

After mac1= you can add mac2= and so on.

Thanks, ill try

 

Tried this, still not working. I used the real Mac of my NIC and an original serial number from a DS413j. What I don't understand is why it doesn't work anymore while it worked with DSM 5.0.

Share this post


Link to post
Share on other sites

i'm using the mac and serial of my old broken ds109j and its working. Maybe you have also use the mac of your ds413j

Share this post


Link to post
Share on other sites

You need to have MAC address in synology scheme (001132xxxxxx), ds model and corresponding with ds model serial number. Only then everything works fine.

Share this post


Link to post
Share on other sites

I have same problem too.

 

I changed my model name to DS115j and put the matching serial number. I rebooted the machine and now I get this migration screen.

 

What can I do or what have I done wrong?

 

Thanks

 

2zy8tix.jpg

Share this post


Link to post
Share on other sites
You need to have MAC address in synology scheme (001132xxxxxx), ds model and corresponding with ds model serial number. Only then everything works fine.

 

Hello.

 

I Do not own any synology product. I has only a Gen8 HP Server and trying to configure MyDS to work. Does anybody know the Product Serial Number format of DS3615xs machines so as to take the format only and change the numbers?

 

I open my syslinux.cfg file changed S/N but i cannot find any MAC Adress there. Who can i translate my MAC Address to format (001132xxxxxx) ?

 

Thanks in advance.

Share this post


Link to post
Share on other sites
maybe if we dont rape synology services without paying they wont try so hard to keeping us from using it?

 

+20

Share this post


Link to post
Share on other sites

im trying to change the syslinux.cfg for setup my real hardware DiskStation DS115j

 

can anyone tell me, when i boot i got a rackstation RS3411RPxs?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now