Jump to content
XPEnology Community

DSM_DS214play_4528 installation on SATA HDD failed


stecaro

Recommended Posts

Hello,

I have done some tests to install DSM on my Shuttle XPC SG31G2 P4 1.8Ghz

Installation of version 4528 on IDE HDD was OK but same version on SATA HDD were failed

Same problem with version 4482: OK on IDE HDD but failed on DATA HDD

I have tried on 2 IDE HDD (both OK) and on 2 SATA HDD (both failed)

At the end of the installation (after 600s timer), Synology Assistant still indicates "Migratable" and not "Ready"

 

I then tried version DMS_DS3612xs_4528 on everything was OK on both IDE and SATA HDD without any BIOS configuration changes.

Have you any idea why DSM_3612 is OK on IDE and SATA disk but not DSM_4528?

Thank you.

Link to comment
Share on other sites

Hello,

 

You are not verry clear about the situation.

Firts you say: 4528 is working OK

Later you say: 3612 is OK and 4528 not.

 

I then tried version DMS_DS3612xs_4528 on everything was OK on both IDE and SATA HDD without any BIOS configuration changes.

Have you any idea why DSM_3612 is OK on IDE and SATA disk but not DSM_4528?

 

What is it exactly?

 

Do you have the AHCI or IDE option on the Sata ports in your BIOS? maybe you can change SATA AHCI to SATA IDE?

Link to comment
Share on other sites

Hello,

Sorry if it is not clear.

I explain again:

DS214play OK when installed on IDE HDD but not when installed on SATA HDD

DS3612 OK when installed on both SATA and IDE HDD

 

My problem is to install DS214play on SATA HDD. Synology Assistant always display "Migratable"

 

Any idea?

Link to comment
Share on other sites

If you managed to install DS3612 than your processor is 64 bit. Or it will fail the installation afaik. If you install a Windows 64 Bit on a 32 Bit computer, the installation will never start. Do you have a model of the CPU?

Maybe you can boot your server with HBCD and start SIW to find out wich hardware you are using.

Link to comment
Share on other sites

Same issue here, i think it's a driver issue.

The installation ends well but the status is migratable.

And when you visit your server the version is not 4528 but 4428.

After that nothing works all pat files end whith an error 13.

 

Xpenology is not new for me i did serveral installation and all worked well.

But i cant get it to work on this specific machine.

Link to comment
Share on other sites

×
×
  • Create New...