Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Microserver N40L

- Additional comments: Remember to delete ".xpnoboot" or your NIC won't work

Link to post
Share on other sites

- Clean Install:  SUCCESFUL(ish)
- DSM version prior update: NONE - Direct Load DSM 6.2.3-25426
- Loader version and model: JUN'S LOADER v1.03b DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.7
- Additional comment: Fresh install VM, modified PID/VIC with generated SN and MAC, Created with 10 - 2TB virtual disks.  System ran stable and steady for 24 hours. Since then drives randomly get a drive marked as "failing" and system goes to 'repairing' mode. After repair, reboot and everything is fine, but within 24 hours another different drive is marked as failing starting the cycle again. I have not lost any data however.  Will update if I find a solution. 

Link to post
Share on other sites

Machine #1:

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.03b DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - AMD Ryzen 5 2600 6X 3.4 GHz, 16 GB DDR4, ASUS A320M-K Mainboard + Intel NE1000 Network Controller

 

Machine #2:

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.03b DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - 5120 MB RAM,  AsRock ALiveNF7G Athlon x2 5000+ 2,6GHz  + Intel NE1000 Network Controller

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i3-8100t   GIGA-BYTE  H370 AORUS GAMING 3 WIFI

Link to post
Share on other sites

 

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-24922-update 2

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel NUC 5i5 MYHE 16GB RAM 500GB SSD + 500GB NVME

- Additional comments: Failed to download version 2 update of DSM 6.2.3-25426

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 6.7

- Additional comments: install FixSynoboot + Reboot required.

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 (24922) update 4.

- Loader version and model: Jun's Loader v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus H87i-plus with i3 CPU. Intel NIC in there too and multiple drives.

- Additional comments: Worked first time. I disabled the network team before trying the upgrade. Was back up within 5 minutes. Easy peasy.

Link to post
Share on other sites
  • 3 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 (24922) update 4.

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - ASROCK J3455-itx. Intel NIC in there too and multiple drives.

- Additional comments: Worked first time. Manual reboot. No issues and no need to remove the custom extra.lzma (had tested it with a clone of the USB drive and a spare disk beforehand). No immediately visible update to 6.2.3 update 2. Maybe need to wait a while.

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 - Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: HP Microserver Gen8 onboard NIC enabled

- Additional comment: Start from a USB memory with VID and PID modified on it. Without any problem and working fine.

Edited by jimenezsei
corrections
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: ASRock J4005M

- Additional comments: No trouble.

Edited by Sharkboy
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: v0.13.3 for 6.2.3 from IG-88

- Installation type: BAREMETAL - ASRock J5040-ITX, 16GB RAM, using onboard sata ports & nic

- Additional comments: Real sn and mac. VT-d disabled in bios. Reboot and Shutdown works. "cd /dev/dri" okay. "cat /usr/syno/etc/codec/activation.conf" returns {"success":true,"activated_codec":["mpeg4part2_dec","h264_dec","h264_enc","hevc_dec","aac_dec","aac_enc","ac3_dec"],"token":"5******************************1"}. I haven't gotten around to testing plex hw transcoding yet, but I don't predict any issues. Will edit if there is.

  • Like 1
Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock H370M-ITX - G5600

- Additional Comment: Reboot required

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-2546

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Micro Server G8 | Celeron G1610T |4GB RAM

- Additional comments: No trouble.

Edited by WolfmanX1979
Link to post
Share on other sites
  • 3 weeks later...

Outcome of the update: SUCCESSFUL

- DSM version prior update: 6.2.3-25426 update 2

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Alibaba Intel Celeron C3865u Skylake onboard, 16gb RAM, 12 x SATA port via 3 x Marvell 88SE9215 onboard controller, PCIe 8x slot, Dual Intel 211 integrated NIC, 9 x 4TB drives

- Additional Comment: Reboot required after update


- Outcome of the update:  SUCCESSFUL

- DSM version prior update: 6.2.3-25426 update 2

- Loader version and model: JUN'S LOADER v1.0b - DS3615

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - SOYO J1900 Quad Core 2.4Ghz mATX board, additional Intel 1GB NIC, 4 GB RAM, LSI 8 port SAS controller, 8 x 5TB drives, 2 x onboard sata spare

- Additional comments: Reboot required

Link to post
Share on other sites

- Outcome of the update: semi-SUCCESSFUL (NVME drive lost after update and then recovered manually)
- DSM version prior update: DSM 6.2.2-24922 Update with NVME patch
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: YES v.0.8 std
- Installation type: BAREMETAL -  Asrock Z390M-ITX/ac, Core i3-9100f, intel i211AT, intel i219V, Intel Optane 16gb NVME drive (M.2)

- Additional Comment: NVME drive was added to DSM 6.2.2-24922-6 as volume according this tutorial. Lost this volume (not data!) in DSM after 6.2.3-25426 update. I had to "mdadm --assemble --scan" and then manually copy patched "libsynonvme.so.1" from this post to my "/lib64" dir to recover it. Other than that - all Ok. No data lost.

Edited by Outrullers
Link to post
Share on other sites

Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update: DSM 6.1.7

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC

- Additional comment: Nothing special, running smoothly. Will try to update to 6.2.3 update 3

Link to post
Share on other sites
  • 1 month later...

Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC

- Additional comment: Will remove Intel NIC as onboard NIC functional again, Update went smoothly yet took a bit of time.

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i5-6400T 4c @2,2Ghz, asus h110i-plusm 2x4GB dualchannel memory.

- Additional comments: Works without a problem.

Edited by devil-strike
Link to post
Share on other sites
  • 4 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1 (DS918+)

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: yes (0.11_test)

- Installation type: BAREMETAL - Terramaster F2-220

- Additional comments: Tried update 6.2.1->6.2.2 (DS918+), which did not work. "Migrated" to (DS3615xs), using clean installation without loosing data. Select "Show as hdd"-option when flashing USB stick with RUFUS. Updated to 6.2.2, then 6.2.3

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Jetway NC9C-550-LF Mini-ITX Atom Motherboard + 2GB RAM 😜

 

- Additional comment: Direct update from web interface without any issues took 10min.

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Signature.

- Additional comments: No trouble.

 

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Pro 3400 -  Intel Pentium G850 2,9GHz Sandy Bridge - Chip Set H61 - 4GB RAM - NIC: Hewlett Packard 10/100/1000

- Additional comments: Runs very good - hope update is possible

Link to post
Share on other sites
  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 3

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant ML10, Xeon 1270 V2 (Upgrade)/DS3617xs/DSM 6.2.3-25426 update 3/Jun Loader 1.03b 

- Additional comments: Runs very good - hope update is possible

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.