Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: yes (0.5 test)

- Installation type: BAREMETAL - Terramaster F2-420 8gb

- Additional comments: Manual update got error 21, so i installed FixSynoboot.sh, restarted the sistem, updated USB partition with new extra.lzma 0.11 (thanks to IG-88) and rd.gz and zimage extracted from DSM_DS3615xs_25426.pat

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: ESXI on Dell R710

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: 2 x BAREMETAL - Dell Optiplex 790

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 760

- Additional comments: Running fine so far however USB Boot drive showing up in File Manager as well as External Devices eject button always showing on GUI

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: IG-88 v0.11_test

- Installation type: BAREMETAL - i7-3770K

- Additional comments: Prior to upgrade i built an additional USB boot drive using zImage and rd.gz from 6.2.3 pat file along with IG-88's extra.lzma.  Deleted files in /lib/modules/update and started manual upgrade.  When the system reboots on it's own it will hang on the original USB boot loader, the new USB boot drive is swapped in and after a power cycle everything comes back up without issue.

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: manual reboot required | NIC: HP NC-360T

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL ASRock z390M-ITX/ac, LSI 9211-8i in IT mode

- Additional comments: update went OK, HDD hibernation no longer works (worked fine in 6.2.2u6), repeated errors logged in /var/log/scemd.log related to fan and temperatures, Control Panel -> Hardware & Power -> General -> Fan Speed Mode options are gone

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.1.3-25423

- Loader version and model: Jun 1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Baremetal - Asus P6T - Xeon X5660 - 12 Gb DDR3

- Additional comments: manual reboot required - NIC HP NC360T

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VIRTUAL Proxmox 6.2-4

- Additional comments: USED FixSynoboot.sh and reboot VM was necessary

Share this post


Link to post
Share on other sites

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI Z270 Gaming Pro - i7-7700k  - RAM 32 GB DDR4

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 update 4

- Lo ader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Msi B360m Pro-vd / Intel Celeron G5400 Gold / 4Gb ram DDR-4

- Additional comments: Reboot require

upgrade 6.2.3.JPG

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: YES ( see comments)

- Installation type: BAREMETAL - Asrock Z270M-ITX/AC - i5-7400  - RAM 4 GB DDR4

- Additional comments: Hardware transcoding was not fonctionnal in plex at first. So i replaced extra.Izma and extra2.Izma ( with the one provided by IG-88) in the second partition of the usb stick and it works again.

 

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun 1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - NAS THECUS 4800

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-6

- Loader version and model: Jun's v1.04b - DS918+ ( use zImage and rd.gd

- Using custom extra.lzma: YES (v0.11 for 6.23 by IG-88)

- Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V

- Additional comments:  HW transcode is still working in Plex and Jellyfin.- I loaded in the loader 1.04 the zImage  and rd.gd files from the DSM_DS918+_25426.pat archive. - After update i'm execute rm -rf /usr/lib/modules/update/* and reboot.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.