Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver  Gen7 N36L with Intel NIC

- Additional comments: Reboot required

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.2 - HP Microserver  Gen8 E3-1230 V2 - Custom NIC e1000e

- Additional comment :  ERROR 21 while loading update

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional comments: Reboot required

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP ProLiant Microserver Gen8 (Xeon 1220Lv2)

- Additional comment: To avoid custom extra.lzma, I already installed in 2019 an Intel e1000e Dual-Nic (HP NC360T) to go for 6.2, and disabled the onboard NICs in BIOS.

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Fujitsu D3417-B1 C236 Chipset w/ Xeon 1220v5

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Biostar A10N-8800E (Carizzo), 8 GB DDR4 2133, Inline 76617d 4x SATA controller

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: YES (v0.11 for 6.23 by IG-88)

- Installation type: BAREMETAL - Asrock B250M-HDV / i5 7500T crossflashed Dell Perc H200 to LSI 9211-8i

- Additional comments:  HW transcode is still working in Video Station, Plex and Jellyfin, thanks to extra.lzma v0.11.

  • Like 1
Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Clean install

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: v0.11 for 6.23 by IG-88

- Installation type: BAREMETAL - Gigabyte B85M-D2V / i3 4150T / On board nic RTL8111F

- Additional comments:  Before all of this, i have install 1.02b-6.1.7 with 3617XS and occur the"Time Bomb". Then I fully clean install 1.03b-6.2.3 25423 with 3615xs,but :[LAN1]Link down&up appear randomly in the log , That's really makes me gloomly. I dont need HW transcode ,hitherto,24 hours has been past,the DSM runing well , if the [Link down&up] reappear, there's no solution but only throw the old B85 platform into river. thanks to extra.lzma v0.11.

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25423
- Loader version and model: Jun's v1.04b - DS918+
- Installation type: BAREMETAL - HP Microserver Gen10
- Additional Comments: Reboot Required

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.1.7 Update 3

- Loader version and model: Jun 1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7U2

- Additional comments: Error 21 encountered on Migration Install.  Attempted a Recovery Install and this also resulted in Error 21.

Eventually had to do a clean 6.2.3 install on a new drive and import the arrays manually.

 

This particular system was very complex - RDM NVMe boot drives, RAIDF1, passthrough SATA and 10Gbe network and multiple storage pools. I performed a number of simulated upgrades directly from 6.1.7 to 6.2.3, and they all completed successfully. However, I see that a small number of upgrade attempts are also reporting Error 21. EDIT 2020-05/20 - it seems most, if not all of these are due to synoboot not being accessible which is required to complete the update. As I was attempting a migration upgrade, there was no opportunity to load FixSynoboot.sh on a clean 1.03b loader. 

 

Potential alternative resolutions might be to 1) edit DiskIdxMap and SataPortMap in grub runtime environment 2) use a serial console to manually create synoboot prior to initiating the migration install, or 3) upgrade first to 6.2.1, apply FixSynoboot.sh and then upgrade to 6.2.3.

Link to post
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 UPDATE 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES and extra2

- Installation type: BAREMETAL - ASRock J4105

- Additional comments: Booted OK, but unable to update DSM: "Failed to install the file. the file is probably corrupted. (13)". Had to install on clean drive and do the migration procedure.

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 UPDATE 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES and extra2

- Installation type: BAREMETAL - ASRock J4105

- Additional comments: Worked after migration.

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM in ESXi 6.7

- Additional comments: Installed FixSynoboot.sh after install the update.

Link to post
Share on other sites

Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -i5 4460 MSI B85-G43 - After error 21 i deleted ISCSI LUN

 

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -i5 4460 MSI B85-G43

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Asrock J5005-ITX

- Additional comments: Shutdown and restart do not work

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox VE - Thinkpad T410s, Intel i5-540M

- Additional comments: REBOOT REQUIRED -- Manual Update

Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

DSM version prior to update: DSM 6.2.2

Loader version and model: Jun v1.04b - DS918+

Using custom extra.lzma: IG-88 extra driver v0.11

Installation type: Asrock Q1900-ITX

Additional comments: need RECOVER at synology assistant

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.2 - HP Microserver  Gen8 E3-1230 V2 - Custom NIC e1000e

- Additional comment : ERROR 21 while loading update

 

-------------------------------------------------------------------------------------------------------------------------------------

 

after use FixSynoboot.sh, everything is ok

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.2 - HP Microserver  Gen8 E3-1230 V2

- Additional comment : Custom NIC e1000eFixSynoboot.sh

  • Like 1
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J4105-ITX

- Additional comments: missing /dev/dri, hw transcoding not working, others work fine

Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X8DTI-F / NIC: Intel 82576 Dual-Port Gigabit Ethernet, plus an Intel EXPI9301CTBLK PRO1000 Network Card CT PCIex / Chipset: Dual Intel E5620 Xeon / SATA Additional Controllers: Lindy 4 port SATA 3 PCIe /  Disks: 8 x 8TB WD Red, 1 x 256GB SSD

- Additional comments: After manual reboot everything recognised and working

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-update 5
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: YES v0.11
- Installation type: BAREMETAL - HP ProLiant Microserver Gen10 X3421, 32GB ECC RAM, SDD. HDD, Intel NVME 2TB, Aquantia 10gbit NIC, DVD, USB Audio, UPS
- Additional Comment: Semibrick install (PAT in UI + copy extras in file manager before boot). Lost few settings and root folder. Both NVME as standalone drive and 10gbit 3rd NIC worked after patches and another reboot

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - on Asrock Z87-Extreme6, Intel I5,12 GB Ram,

- Additional comments: confirm Reboot and everything is OK!

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Microserver Gen8 onborad NIC enabled 

- Additional comment: NIC is not visible after reboot.

↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 onborad NIC enabled

- Additional comment: Re-created synoboot.img on a USB memory. Repair after startup. I was able to update safely.image.thumb.png.439e3f0937fe63733323c23a89e8e08e.png

  • Like 1
Link to post
Share on other sites
On 5/15/2020 at 7:07 PM, luchuma said:

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 7

- Additional comments: ERROR 21 while loading update

 

 

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 7

- Additional comments: ERROR 21 while loading update

 

both SUCCESSFUL with FixSynoboot from flyride

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL HPE MicroServer gen8

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b - DS3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Gigabyte GA-B75N, i3-2100, 4GB RAM, NIC: Intel Pro/1000 PT

- Additional comment : Downloaded pat file from synology.com and applied manual update

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3617XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Z220 Workstation, Xeon E3-1225-v2, integrated 82579lm NIC

- Additional comment : Manual PAT update, UEFI boot disabled in BIOS, JUN'S LOADER v1.03b Hybrid partition table usb keyhttps://www.rodsbooks.com/gdisk/hybrid.html

Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23922 Update 5

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES

- Installation type:  BAREMETAL - ASUS ROG STRIX Z390 I GAMING, Intel - Core i3-8100 3.6 GHz Quad-Core Processor

- Additional comments: Ran Recommended Commands: rm -rf /usr/lib/modules/update/*
rm -rf /usr/lib/firmware/i915/* from ssh terminal to remove drivers and restarted before using newly copied Test LZMA 0.11. Updated Directly with DSM_DS918+_25426.pat file, took about 7-10 minutes from restart back to Main Page. All Settings Seem to be intact including Docker. AMAZON USB 3.0 GIGABIT ETHERNET NIC Working (0B95 1790), . I-219-V Internal NIC (WORKING GREAT with Test LZMA v0.11 previously did not work). I am a happy camper. I also recommend having a ubuntu iso flashed to a flash drive on hand for quick troubleshooting and getting a better view of your devices ID's & grub editing/mounting. Cheers and Thank You again to all members who assisted! 

  • Like 1
Link to post
Share on other sites

- Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC

- Additional comment: Used FixSynoboot from flyride

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.