P53x11 Posted August 4, 2020 Share #176 Posted August 4, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 4 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: YES - Installation type: BAREMETAL - HP Microserver N40L - Additional comments: Remember to delete ".xpnoboot" or your NIC won't work Quote Link to comment Share on other sites More sharing options...
knightbird Posted August 4, 2020 Share #177 Posted August 4, 2020 - Clean Install: SUCCESFUL(ish) - DSM version prior update: NONE - Direct Load DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.03b DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.7 - Additional comment: Fresh install VM, modified PID/VIC with generated SN and MAC, Created with 10 - 2TB virtual disks. System ran stable and steady for 24 hours. Since then drives randomly get a drive marked as "failing" and system goes to 'repairing' mode. After repair, reboot and everything is fine, but within 24 hours another different drive is marked as failing starting the cycle again. I have not lost any data however. Will update if I find a solution. Quote Link to comment Share on other sites More sharing options...
Toddie Posted August 5, 2020 Share #178 Posted August 5, 2020 Machine #1: - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - AMD Ryzen 5 2600 6X 3.4 GHz, 16 GB DDR4, ASUS A320M-K Mainboard + Intel NE1000 Network Controller Machine #2: - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.03b DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - 5120 MB RAM, AsRock ALiveNF7G Athlon x2 5000+ 2,6GHz + Intel NE1000 Network Controller Quote Link to comment Share on other sites More sharing options...
advin Posted August 18, 2020 Share #179 Posted August 18, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Core i3-8100t GIGA-BYTE H370 AORUS GAMING 3 WIFI Quote Link to comment Share on other sites More sharing options...
jak8 Posted August 25, 2020 Share #180 Posted August 25, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-24922-update 2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel NUC 5i5 MYHE 16GB RAM 500GB SSD + 500GB NVME - Additional comments: Failed to download version 2 update of DSM 6.2.3-25426 Quote Link to comment Share on other sites More sharing options...
TiTiTG34 Posted August 25, 2020 Share #181 Posted August 25, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: VM - ESXI 6.7 - Additional comments: install FixSynoboot + Reboot required. Quote Link to comment Share on other sites More sharing options...
Hostilian Posted September 6, 2020 Share #182 Posted September 6, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2 (24922) update 4. - Loader version and model: Jun's Loader v1.03b DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus H87i-plus with i3 CPU. Intel NIC in there too and multiple drives. - Additional comments: Worked first time. I disabled the network team before trying the upgrade. Was back up within 5 minutes. Easy peasy. Quote Link to comment Share on other sites More sharing options...
Hostilian Posted September 25, 2020 Share #183 Posted September 25, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2 (24922) update 4. - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: YES - Installation type: BAREMETAL - ASROCK J3455-itx. Intel NIC in there too and multiple drives. - Additional comments: Worked first time. Manual reboot. No issues and no need to remove the custom extra.lzma (had tested it with a clone of the USB drive and a spare disk beforehand). No immediately visible update to 6.2.3 update 2. Maybe need to wait a while. Quote Link to comment Share on other sites More sharing options...
jimenezsei Posted October 7, 2020 Share #184 Posted October 7, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: HP Microserver Gen8 onboard NIC enabled - Additional comment: Start from a USB memory with VID and PID modified on it. Without any problem and working fine. Edited October 7, 2020 by jimenezsei corrections Quote Link to comment Share on other sites More sharing options...
Sharkboy Posted October 13, 2020 Share #185 Posted October 13, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 4 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: ASRock J4005M - Additional comments: No trouble. Edited October 13, 2020 by Sharkboy Quote Link to comment Share on other sites More sharing options...
stevenngu92 Posted October 20, 2020 Share #186 Posted October 20, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: v0.13.3 for 6.2.3 from IG-88 - Installation type: BAREMETAL - ASRock J5040-ITX, 16GB RAM, using onboard sata ports & nic - Additional comments: Real sn and mac. VT-d disabled in bios. Reboot and Shutdown works. "cd /dev/dri" okay. "cat /usr/syno/etc/codec/activation.conf" returns {"success":true,"activated_codec":["mpeg4part2_dec","h264_dec","h264_enc","hevc_dec","aac_dec","aac_enc","ac3_dec"],"token":"5******************************1"}. I haven't gotten around to testing plex hw transcoding yet, but I don't predict any issues. Will edit if there is. 1 Quote Link to comment Share on other sites More sharing options...
shaggy0928 Posted October 21, 2020 Share #187 Posted October 21, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-6 - Loader version and model: Jun's Loader v1.03b - DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - i3-4340 + 8GB RAM / Intel NIC Quote Link to comment Share on other sites More sharing options...
Mano Posted November 1, 2020 Share #188 Posted November 1, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 6 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock H370M-ITX - G5600 - Additional Comment: Reboot required Quote Link to comment Share on other sites More sharing options...
WolfmanX1979 Posted November 6, 2020 Share #189 Posted November 6, 2020 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-2546 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Micro Server G8 | Celeron G1610T |4GB RAM - Additional comments: No trouble. Edited November 6, 2020 by WolfmanX1979 Quote Link to comment Share on other sites More sharing options...
JasonDragon Posted November 24, 2020 Share #190 Posted November 24, 2020 Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2.3-25426 update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Alibaba Intel Celeron C3865u Skylake onboard, 16gb RAM, 12 x SATA port via 3 x Marvell 88SE9215 onboard controller, PCIe 8x slot, Dual Intel 211 integrated NIC, 9 x 4TB drives - Additional Comment: Reboot required after update - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2.3-25426 update 2 - Loader version and model: JUN'S LOADER v1.0b - DS3615 - Using custom extra.lzma: NO - Installation type: BAREMETAL - SOYO J1900 Quad Core 2.4Ghz mATX board, additional Intel 1GB NIC, 4 GB RAM, LSI 8 port SAS controller, 8 x 5TB drives, 2 x onboard sata spare - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
Outrullers Posted November 24, 2020 Share #191 Posted November 24, 2020 (edited) - Outcome of the update: semi-SUCCESSFUL (NVME drive lost after update and then recovered manually) - DSM version prior update: DSM 6.2.2-24922 Update 6 with NVME patch - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: YES v.0.8 std - Installation type: BAREMETAL - Asrock Z390M-ITX/ac, Core i3-9100f, intel i211AT, intel i219V, Intel Optane 16gb NVME drive (M.2) - Additional Comment: NVME drive was added to DSM 6.2.2-24922-6 as volume according this tutorial. Lost this volume (not data!) in DSM after 6.2.3-25426 update. I had to "mdadm --assemble --scan" and then manually copy patched "libsynonvme.so.1" from this post to my "/lib64" dir to recover it. Other than that - all Ok. No data lost. Edited November 24, 2020 by Outrullers Quote Link to comment Share on other sites More sharing options...
bawanag Posted November 25, 2020 Share #192 Posted November 25, 2020 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-25426 - Loader version and model: Jun's Loader v1.04b DS918+ - Installation type: J4125-ITX + 8GB RAM+ Realtek 8125b*4 Quote Link to comment Share on other sites More sharing options...
vickywhli Posted December 1, 2020 Share #193 Posted December 1, 2020 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC - Additional comment: Nothing special, running smoothly. Will try to update to 6.2.3 update 3 Quote Link to comment Share on other sites More sharing options...
Church of Noise Posted January 8, 2021 Share #194 Posted January 8, 2021 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC - Additional comment: Will remove Intel NIC as onboard NIC functional again, Update went smoothly yet took a bit of time. Quote Link to comment Share on other sites More sharing options...
devil-strike Posted January 8, 2021 Share #195 Posted January 8, 2021 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Core i5-6400T 4c @2,2Ghz, asus h110i-plusm 2x4GB dualchannel memory. - Additional comments: Works without a problem. Edited January 8, 2021 by devil-strike Quote Link to comment Share on other sites More sharing options...
parh82 Posted January 31, 2021 Share #196 Posted January 31, 2021 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1 (DS918+) - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: yes (0.11_test) - Installation type: BAREMETAL - Terramaster F2-220 - Additional comments: Tried update 6.2.1->6.2.2 (DS918+), which did not work. "Migrated" to (DS3615xs), using clean installation without loosing data. Select "Show as hdd"-option when flashing USB stick with RUFUS. Updated to 6.2.2, then 6.2.3 Quote Link to comment Share on other sites More sharing options...
MasMarco Posted February 10, 2021 Share #197 Posted February 10, 2021 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: Jun's Loader v1.03b DS3615XS - Using custom extra.lzma: No - Installation type: BAREMETAL - Jetway NC9C-550-LF Mini-ITX Atom Motherboard + 2GB RAM 😜 - Additional comment: Direct update from web interface without any issues took 10min. Quote Link to comment Share on other sites More sharing options...
infonator8 Posted February 10, 2021 Share #198 Posted February 10, 2021 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Signature. - Additional comments: No trouble. Quote Link to comment Share on other sites More sharing options...
synoman Posted February 19, 2021 Share #199 Posted February 19, 2021 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 - Loader version and model: JUN'S LOADER v1.02b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Pro 3400 - Intel Pentium G850 2,9GHz Sandy Bridge - Chip Set H61 - 4GB RAM - NIC: Hewlett Packard 10/100/1000 - Additional comments: Runs very good - hope update is possible Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 4, 2021 Share #200 Posted March 4, 2021 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 3 - Loader version and model: JUN'S LOADER v1.02b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Proliant ML10, Xeon 1270 V2 (Upgrade)/DS3617xs/DSM 6.2.3-25426 update 3/Jun Loader 1.03b - Additional comments: Runs very good - hope update is possible Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.