Jump to content
XPEnology Community
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte 965P DS4 - Intel Core2Duo E6600 - 4Go DDR2

- Additional comments: Reboot required, i installed FixSynoboot.sh for not see the bootloader usb in filesystem

Edited by bbbtd
Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Gen7 N54L

- Additional comments: After update, DSM not working. Had to switch off server manually and recreate the usb stick with Jun Loader v1. 03b DS3615xs without any extra and I extracted rd and zimage files from 6.2.3-25426 pat file and put it in partition 2 to replace the ones from the 1.03b loader. Everything working fine now

Edited by yongbi
Bolding
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: None, fresh install, with automatic download of .PAT

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Fujitsu Esprimo Q956 - 256GB-M2 - 16GB RAM - i7-6700T

- Additional comments: Bios disabled secure boot, set to supporting both Legacy and EFI, locked to boot from USB as default.

Edited by bearcat
added CPU spec.
Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: DS3615xs_V1.03b_MBR_Zandstraal

- Using custom extra.lzma: NO

- Installation type: Baremetal HP DC7600 convertible tower

 

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 5.2-5967 update 9

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: Clean install | reboot required | onboard NIC recognised | had to run sudo rm -rf /.xpenoboot to get network settings working after migrating data

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1

- Loader version and model: Jun's v1.04b - DS918+ ( use zImage and rd.gd of .PAT DSM 6.2.3 )

- Using custom extra.lzma: YES (v0.13 for 6.2.3 by IG-88)

- Installation type: BAREMETAL - MSI B150M PRO-VH - Intel G4400 - OnBoard Realtek RTL8111H

- Additional comments:  HW transcode is still working in Jellyfin.- I loaded in the loader 1.04 the zImage  and rd.gd files from the DSM_DS918+_25426.pat archive. - After update i'm execute rm -rf /usr/lib/modules/update/* and reboot.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 4
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: HP Elite 8200, integrated NIC Intel 82579LM

- Additional comments: Computer needs to be booted in Legacy BIOS mode for network to work (since DSM 6.2).

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant Microserver Gen8

- Additional comments: used the extra.lzm provided in loader 1.03b

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: New install
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock DiskMini 110 Intel G4600

- Additional Comment: manual Reboot, HW transcode Ok, WOL Ok

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: VM - Unraid 6.8.3 on supermicro MNL-5028D-TN4T 

- Additional Comment: VM has e1000e NIC, and 3 x HDD pass-through

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL DELL Optiflex 7010, Intel Core i7 3770 Ivy Bridge, Motherboard Dell Inc. 0KRC95, Ethernet Intel 82579LM

- Additional comments Everything work great , no reboot required.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: Jun’s Loader v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: Custom PC Gigabyte EP43-DS3L, Intel Core 2 Duo CPU @ 2666Mhz, 4GB RAM

- Additional comments:  Having to come back to DSM 5.2 version due to the fact that Media Server software does not work properly and I cannot watch 4K content on my Smart TV.

Link to comment
Share on other sites

- Resultado de la actualización: EXITOSO

- Actualización previa de la versión DSM: DSM 6.2-23739

- Versión y modelo del cargador: Jun's Loader v1.03b DS3615xs

- Uso de extra.lzma personalizado: NO

- Tipo de instalación: PC personalizada Asrock AM1B-ITX, CPU AMD AM1 Athlon 5350, 4GB DDR3, Controladora: Syba SI-PEX40064 (4xSATA III)

- Comentarios adicionales: Venía de DSM 5.2-5592 Actualización 3. Actualizé a 6.2-23739. Tuve que borrar el archivo xpenoboot. Con el mismo USB, y desde el sistema, actualizo a 6.2.3. No he tocado el valor de sataportmap.

Edited by Jogar
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: Dell OptiPlex 790

- Additional comments: Update gave error 21 and failed until after I installed FixSynoboot.sh

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 7.0 with 2 RDM sets on Supermicro X10SDV-4C-TLN2F, Intel Xeon-D, 128GB RAM

- Additional comment: Used FixSynoboot from flyride (Thanks !). Direct update through DSM WebUi.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7.0 (Build 16075168)

- Additional comment: NIC: E1000e | added FixSynoboot.sh fix before using built in download & update and all went to plan (Thanks flyride 👍)

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP G1610T-Gen8 Microserver

- Additional comments: Using SD-Card, no USB thumbdrive. Only internal NIC's (tg3). After update, DSM didn't came online again. Had to recreate the SD-Card with Jun's Loader v1.03b DS3617XS without any extra's and I extracted extra.lzma from "extra3617_v0.11.2_test.zip" from user IG-88 and put it in partition-2 to replace the one from Jun. After flashing it and booting I had to repair the system using Syno-Assistant. Everything works after that. HP-AMS support is gone though; CPU-Info had to be reinstalled.

Edited by Last Boyscout
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2 Fresh install

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HPE MicroServer Gen10 (P04923-S01)

- Additional comments: 10Gtek(Intel) X520-DA1 SFP+ NIC working alongside internal GbE

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: Jun's Loader v1.03b DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P8H77-M | I5 2500 | 8GB

 

-Additional Comment: Fresh Install

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - H310CM-ITX

- Additional Comment: 1. some port of network card cannot be use, only work in link aggregation.
                                         2. VM not able to install linux OS, freeBSD to latest.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES, v0.5 for 6.2.2 (before upgrade - see additional comments)

- Installation type: BAREMETAL - HP MicroServer Gen7 N36L, using built-in NIC (HP NC107i / Broadcom BCM5723)

- Additional comments: upgrade within DSM GUI - no response on network after reboot. Had to switch off server manually and recreate the USB loader stick as a completely standard Jun's Loader v1.03b (no modifications to second partition). Server then booted, completed upgrade and rebooted again after which it was all working. NIC does not support jumbo frames.

Edited by sounds2k
Link to comment
Share on other sites

  • Polanskiman unfeatured, featured, unfeatured, featured and unfeatured this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...