Jump to content
XPEnology Community
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: yes (0.5 test)

- Installation type: BAREMETAL - Terramaster F2-420 8gb

- Additional comments: Manual update got error 21, so i installed FixSynoboot.sh, restarted the sistem, updated USB partition with new extra.lzma 0.11 (thanks to IG-88) and rd.gz and zimage extracted from DSM_DS3615xs_25426.pat

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: 2 x BAREMETAL - Dell Optiplex 790

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 760

- Additional comments: Running fine so far however USB Boot drive showing up in File Manager as well as External Devices eject button always showing on GUI

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: IG-88 v0.11_test

- Installation type: BAREMETAL - i7-3770K

- Additional comments: Prior to upgrade i built an additional USB boot drive using zImage and rd.gz from 6.2.3 pat file along with IG-88's extra.lzma.  Deleted files in /lib/modules/update and started manual upgrade.  When the system reboots on it's own it will hang on the original USB boot loader, the new USB boot drive is swapped in and after a power cycle everything comes back up without issue.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: manual reboot required | NIC: HP NC-360T

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL ASRock z390M-ITX/ac, LSI 9211-8i in IT mode

- Additional comments: update went OK, HDD hibernation no longer works (worked fine in 6.2.2u6), repeated errors logged in /var/log/scemd.log related to fan and temperatures, Control Panel -> Hardware & Power -> General -> Fan Speed Mode options are gone

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.1.3-25423

- Loader version and model: Jun 1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Baremetal - Asus P6T - Xeon X5660 - 12 Gb DDR3

- Additional comments: manual reboot required - NIC HP NC360T

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VIRTUAL Proxmox 6.2-4

- Additional comments: USED FixSynoboot.sh and reboot VM was necessary

Link to comment
Share on other sites

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI Z270 Gaming Pro - i7-7700k  - RAM 32 GB DDR4

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 update 4

- Lo ader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Msi B360m Pro-vd / Intel Celeron G5400 Gold / 4Gb ram DDR-4

- Additional comments: Reboot require

upgrade 6.2.3.JPG

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: YES ( see comments)

- Installation type: BAREMETAL - Asrock Z270M-ITX/AC - i5-7400  - RAM 4 GB DDR4

- Additional comments: Hardware transcoding was not fonctionnal in plex at first. So i replaced extra.Izma and extra2.Izma ( with the one provided by IG-88) in the second partition of the usb stick and it works again.

 

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 4

- Loader version and model: Jun 1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - NAS THECUS 4800

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-6

- Loader version and model: Jun's v1.04b - DS918+ ( use zImage and rd.gd

- Using custom extra.lzma: YES (v0.11 for 6.23 by IG-88)

- Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V

- Additional comments:  HW transcode is still working in Plex and Jellyfin.- I loaded in the loader 1.04 the zImage  and rd.gd files from the DSM_DS918+_25426.pat archive. - After update i'm execute rm -rf /usr/lib/modules/update/* and reboot.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 6

- Loader version and model: Jun 1.04b - DS918+

- Using custom extra.lzma: Before no After yes using YES v0.11 for 6.23 by IG-88

- Installation type: Bare Metal Biostar TB250-BTC Pro Intel Core i5 6400

-Additional comments: After udpate /dev/dri was missing as expected.  I shut down again removed the usb stick put it in my chromebook and moved the extra.lzma and extra2.lzma from the 0.11 additional modules.  After booting back up the second time the /dev/dri folder was back and HW transcode works in Video Station.

Edited by thadrumr
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25423
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: Yes, 0.11 for 6.2.3
- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 
- Additional comments: REBOOT REQUIRED / HW transcode works in Plex

Edited by BlaBla1973
Link to comment
Share on other sites

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.04b - DS918+ (with NVME cache)

- Using custom extra.lzma: Yes. v0.11 from IG-88

- Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5

- Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) only first two usable (I have hardware disabled one 1GBe NIC in order to use 10 GBe NIC), 16 GB RAM available, 10GBe connection  working. H/W transcoding works also using driver extension for 918+ , v0.11,

Reboot required.

Edited by cosmindnl
Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.24922 UPDATE 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES v0.11 from IG-88

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comments: 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: reboot required | Intel NIC | PowerButton reinstalled | PhpVirtualBox works

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL-ISH

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun´s Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 with additional Intel Network Card

- Additional comments: The Update itself was succesful as in no data loss or connectivity issues TO the server - as long as you´re within the network. The server seems to have no connection whatsoever to the package manager and apps like Plex or TeamViewer don´t have connection either. VMs on the server, however, don´t have any issues. I´ll update this post in case I find a fix, but for all Micro Gen8 users: be really careful about updating!

firefox_wONHyZw6WV.png

Edited by Apfelbomber
Link to comment
Share on other sites

- Outcome of the Installation: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Z390M-ITX/AC, Intel Core i7 8700, 16GB RAM on U-NAS 410 Chassis with Noctua NH-L9i CPU fan

-Additional comments: Reboot Required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 6.5 U2

- Additional comment: Used FixSynoboot from flyride. Online Update through DSM

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 7.0 Build 15843807 - LSI 9211-8i passthrough with 5x hdd shr1 and 1x ssd (SMART and TRIM working)

- Additional comment: Used FixSynoboot from flyride. Updated directly from the WebUI in DSM, reboot required.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Proxmox 6.2-4 - Gigabyte H77N-Wifi / CPU : i7-2600s / Ram : 2x4GB DDR3 Corsair Vengeance / Dual Integrated NIC Realtek

- Additional Comment: reboot not required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 5

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro MBD-X11SCL-IF-O, mini-ITX, Intel C242 chipset, CPU Intel Core™ i3-9100F, RAM 32GB, HDD Seagate NAS 4*3=8TB (SHR), WD Ultrastar 12TB, SSD Intel 545s 512GB, Power Thermaltake TR-500P 500W, Back-UPS CS 650

- Additional Comment: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 -24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L G7

- Additional comments: Intel I210-T1 PCIE-NIC Reboot required

Link to comment
Share on other sites

  • Polanskiman unfeatured, featured, unfeatured, featured and unfeatured this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...