Jump to content
XPEnology Community
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - MSI H110M-VH PLUS | NIC: Realtek RTL8111H Gigabit LAN controller | Intel G4400

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 (onboard NIC disabled, using NIC: HP NC-360T)

- Additional comment: reboot required

Link to comment
Share on other sites

- Update status: SUCCESSFUL

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- DSM version prior update: DSM 6.2.2-24922-4

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock H370M, i3-8100 8GB RAM

- Additional Comment: Reboot Required

Edited by Safari
Link to comment
Share on other sites

- Outcome of the install/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - AsRock Z390M Pro4 / Cpu : i3 9100 / Ram : 16Go DDR4 / Nic : HP NC360T

- Additional Comment: Upgrade with DSM function - Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03 - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - asus p8h77i | NIC: Realtek RTL8111F Gigabit LAN controller | Intel i5 3570

- Additional comments: Upgrade with DSM function - Reboot required

Edited by hellion
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL -  HP ProLiant MicroServer Gen8 (g1610t)

- Additional comment: apply FixSynoboot.sh to resolved error 21

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL Optiplex 3020 | i3-4160 | 8 GB RAM

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus P10S-M [Intel Xeon E1230 v6] + Lenovo ServeRAID M5110 (mod firmware for IT mode)

- Additional comments: reboot required

 

After update the CPU usage is 100% (Docker package)

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES, v0.6

- Installation type: BAREMETAL - ASROCK H370 ITX / Core i3 8300T

- Additional comments: Reboot required, new extra.lzma v 0.11 needed

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 (onboard NIC disabled, using NIC: HP NC-360T)

- Additional comment: reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6 

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: Centos 8 KVM - GA-Z68MA-D2H-B3 - i5 3550 - 32 GB - 2x4TB WD RED WD40EFRX

- Additional comments: Test VM + main server are fine

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-4
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Thecus N7510
- Additional comments: USB 3.0 on front (still) not working (NEC D720200AF)

Edited by Bogey
Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b, DS3615xs

- Using custom extra.lzma: no

- Installation type: BAREMETAL - ASRock QC5000M-ITX/PH ( AMD a4-5000)

- Additional comment: apply FixSynoboot.sh to resolved error 21

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: FreeNAS VM

- Additional comment: reboot required

 

I had to revert back to the original loader with none of the extra modules...

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell PowerEdge T30

- Additional comment: Reboot required

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES 0.11

- Installation type: ESXI V7 - ASROCK H370M-ITX/ac | NIC: Intel intel x710-da2 1 port (passthrough)  | Intel Cannon Lake AHCI (passthrough) | Intel UHD 630 graphics (passthrough) | Intel i5-9400 (2 cores) 

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock Z270M Pro4 | Intel i7 6700t | intel x550-T2 | 16GB Corsair Ram | Syba 4 port sata card

- Additional comments: No trouble.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: yes v0.11 for 6.23

- Installation type: BAREMETAL - HP Microserver Gen8 (onboard NIC enabled)

- Additional comment: created new synoboot.img with zImage, rd.gz from DSM_DS3617xs_25426.pat

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: Unraid KVM

- Additional comments: Installed FixSynoboot.sh before Update

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: new install

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: Yes, new ones from May-14-2020 

- Installation type: BAREMETAL - MSI H310M PRO VDH - NIC: R8111 Onboard - Celeron G4920

- Additional comments: Hw transcoding enabled thanks to extra.lzma and extra2.lzma from IG-88

JaviNasFlix.jpg

Edited by Javimoros
adding image
  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP ProLiant Microserver Gen8 G1610T

- - Additional comment: Onboard NIC disabled on BIOS.Additional Intel NIC. I was concerned on this udates because of the different feedbacks but all was transparent for me.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB)

- Additional comments: Reboot required

Edited by bateau
  • Like 1
Link to comment
Share on other sites

  • Polanskiman unfeatured, featured, unfeatured, featured and unfeatured this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...