Jump to content
XPEnology Community
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 4
- Loader version and model: Jun's v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver N40L (AMD) with Intel NIC (e1000e)

- Additional comment : Downloaded pat file from synology.com and applied manual update

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Supermicro X10SRi-F, onboard NICs Intel but not used (not disabled either), Intel Pro/1000 PT (EXPI9400PTBLK listed as 82572)

- Additional comments: Computer needs to be booted in Legacy BIOS mode and I confirmed the Intel 82572 chipset uses Intel e1000e drivers.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25423
- Loader version and model: Jun's v1.04 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock B250M Pro4 | i5-6400T | Intel x520 | 2x 120GB NVME

- Additional comment : removed the NMVE Cache before Upgrade, Installd PAT Manualy, after 2 reboots and aprox. 5 minutes System was UP again. recreate the NVME Cache. 10G Nic works fine as always (without any additional drivers).

Link to comment
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3617XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.2.4 - Supermicro X11SSH-LN4F - Custom NIC e1000e

- Additional comment : ERROR 21 while loading update

 

-------------------------------------------------------------------------------------------------------------------------------------

 

after use FixSynoboot.sh, everything is ok

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03B 3617XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.2.4 - Supermicro X11SSH-LN4F

- Additional comment : Custom NIC e1000e + FixSynoboot.sh

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional Comment: Additional HP NC365T Quad Port Gigabit Ethernet Adapter Low Profile

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL 
- DSM version prior update: DSM 6.2.3-25426 
- Loader version and model: Jun's Loader v1.03b DS3617xs 
- Using custom extra.lzma: No  
- Installation type: BAREMETAL - Supermicro X9DR3-LN4F+ 64GB DDR3

- Additional comment: Used kernal from pat injected into Jun's Loader v1.03b DS3617xs - only reports 4 cores of 16 but that is ok. Been running stable for 7 days now.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25426 

- Loader version and model: Jun's v1.04 - DS918+

- Using custom extra.lzma: extra v10

- Installation type: BAREMETAL - J1900 NAS

- Additional Comment: Everything is work (HW and SW transcode is work).

 

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-UPDATE 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES and extra2 from 0.11 IG-88

- Installation type: BAREMETAL - ASRock J4105

- Additional comments: Manual downloaded Synology DSM 6.2.3, updated over DSM and created a new USB Stick with customer extra files from 0.11 Version IG-88. I could not edit the old USB with WIN32DISCIMAGER....then DSM told me that my hardware is changed, have to click ok and everything worked.

/dev/dvi Hardware transcoding was only there after the 0.11 extra files from IG-88 but SN wasn´t valid so i had to do the patch and before i needed to do the root.

 

All people who are searching for root, here is what to do:

#PermitRootLogin prohibit-password
must be changed to:
PermitRootLogin Yes
paste also this textline under the permitrootloginyes
UsePrivilegeSeparation sandbox

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03b DS3615XS

- Using custom extra.lzma: No

- Installation type: VM - Unraid 6.8.3 on HP Gen8 Microserver 

- Additional Comment: Applied FixSynoboot.sh prior to upgrade. VM has e1000e NIC, and 2 x HDD pass-through. Update was applied using CMS from primary xpenology VM.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  6.2.3-25423 -> 6.2.3-25426

- Loader version and model: Jun's Loader v1.03b DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Fujitsu d3433-s2 (integrated NIC Intel i219LM & i210AT)+ i3-7100 + 16Gb SO-DIMM DDR4 + 10x1tb HGST 2.5"HDD + 30Gb SSD cache

- Additional comments: Only Legacy boot

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3 - 25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2 update4

- Loader version and model: Jun's v1.03b - DS3615xs

- Using custom extra.lzma: Yes, v0.11 for 6.2.3, applyed just before update without reboot

- Installation type: BAREMETAL - HP ProLiant Microserver Gen8 (Xeon 1265Lv2)

- - Additional comment: (HP NC360T) and enabled the onboard NICs in BIOS.

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox KVM 6.1-5

- Additional comments: auto install from DSMIntel NIC E1000, reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8

- Additional comments: Using built in NIC

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P5Q

- Additional comments: Using built in NIC

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P8H61-M-LE-R2

- Additional comments: Using built in NIC

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P5N7A-VM

- Additional comments: PCI-E NIC; onboard NIC does not work

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 (Xeon  E3-1265L + NIC HP NC-360T)

- Additional comment: reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6 to DSM 6.2.2-25426

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES and extra2 from 0.11 IG-88

- Installation type: BAREMETAL - Gigabyte GA-J4105N-H, 1x4Gb DDR4 ram, Raid 0 2x2TB Seagate Ironwolf Harddisk, LAN: Realtek RTL8111 Gigabit, SATA3: 2x Intel chipset
- Additional comment:  Upgrade, used DSM_DS918+_25426.pat,

Update via DSM control panel failed due to network not found DSM device.

Outcome: (with same USB boot device)

1) copy extra2 v0.11 ds918+ - extra.lzma/extra2.lzma to loader 1.04b_mod ds918+

2) replaced zImage and rd.gz from DSM_DS918+_25426.pat to loader 1.04b_mod ds918+. 

*(if zImage and rd.gz from DSM_DS918+_25426.pat not replaced to loader - DSM will failed to boot)

 

working great, no issue so far.

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Elite 8200, integrated NIC Intel 82579LM

- Additional comments: Computer needs to be booted in Legacy BIOS mode for network to work (since DSM 6.2).

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: first install

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Lenovo M92 i5 8 GB RAM onboard Intel NIC

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.1.3-25423

- Loader version and model: Jun 1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMATEL - HP Microserver Gen8 (NIC Intel)

- Additional comments: Error 21 encountered on the first Migration Install, solved by using the FixSynoboot.sh script.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock C2550D4I

- Additional comments: Reboot required.  Intel X540-T2 10GBase-T continues to work.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Poweredge T320 |Intel Xeon E5-2420 v2 (2,20GHz, 6C, Cache 15Mo, 7,2GT/s QPI, 80W, Turbo), 1600MHz de mémoire max  |PERC H710 Adaptateur Contrôleur RAID | 32GB RAM

- Additional comments: No trouble.

2020-05-27_155431.jpg

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma:  YES - real3x mod (removed prior to upgrade)

- Installation type: BAREMETAL - Asrock J3455-ITX

Thanks flyride for the hint on removing real3x mod prior to upgrade

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES
- Installation type: HP Microserver Gen 8 CPU Xeon E31260

- Additional comments: Becareful ... you have to create a new usb key !

I spend 2 hour to understand!

if you use extra.lzma, you have to download the version 0.11 for 6.3 (http://s000.tinyupload.com/?file_id=04147311964729253115 for 3615)

download also the pat file https://archive.synology.com/download/DSM/release/6.2.3/25426/DSM_DS3615xs_25426.pat

extract the zImage file and rd.z and put the 3 files (extra.lzma, zlimage and rd.z) into the usb key.

after that... it's working...

  • Like 1
Link to comment
Share on other sites

UPDATE DSM 6.2.3-25426

- Outcome of the update:  DEAD avec extra Lzma 0.5 I SUCCESSFUL avec extra Lzma de base

- DSM version prior update: DSM 6.2.2-24922 update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - Dell Poweredge T320 |Intel Xeon E5-2420 v2 (2,20GHz, 6C, Cache 15Mo, 7,2GT/s QPI, 80W, Turbo), 1600MHz de mémoire max  |PERC H710 Adaptateur Contrôleur RAID | 32GB RAM

- Additional comments: changé l'extra izma 0.5 test 4436 ko par extra izma de base 1800 ko avec l'aide de partition magic pour montage de la partition 30 mo dans Windows pour la modification du fichier Grub.

2020-05-27_155431.jpg

Link to comment
Share on other sites

Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.3-25423

- Loader version and model: Jun's Loader v1.03b, DS3615xs

- Using custom extra.lzma: no

- Installation type: BAREMETAL - ASRock QC5000M-ITX/PH ( AMD a4-5000)

- Additional comments: Error 21

tried new usb key => error 21

tried to put zlimage and rd.z (25426) => want to migrate to the new 25426 => error 13 ?!

PID/VID is ok

Link to comment
Share on other sites

  • Polanskiman unfeatured, featured, unfeatured, featured and unfeatured this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...