richv31 Posted May 25, 2020 Share #226 Posted May 25, 2020 1 hour ago, chilly said: 0.11 with ASROCK J4105 and 6.2.3 works with HW Transcoding needed to do the serial number patch first. I could also not access to my old usb stick on win7 and win10 with win32imager, so i needed to create a new one. Old usb stick is no usable....not that important by may somebody know how to solve it use diskpart on windows to "CLEAN" the disk, then you can write to it again. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 25, 2020 Author Share #227 Posted May 25, 2020 1 hour ago, chilly said: 0.11 with ASROCK J4105 and 6.2.3 works with HW Transcoding needed to do the serial number patch first. just to mention it, jellyfin for docker would be the free alternative to plex and videostation 1 hour ago, chilly said: I could also not access to my old usb stick on win7 and win10 with win32imager, so i needed to create a new one. Old usb stick is no usable....not that important by may somebody know how to solve it for latest win10 that's kind of normal as you dont get a drive letter anymore for 1st or 2nd partition but not on win7? you can always format it on linux like with dsm, insert it, open external devices and there should be a format option, much easier the diskpart on windows its also possible to assign a drive letter with a additional software to the 1st partition, that way you can use win32diskimager again also possible to use such tool to access 1st and 2nd partition to edit grub.cfg or exchange files an 2nd partition (kernel and extra) thats a good one suggested by @jensmander in the german section, does'nt need any driver installed https://www.partitionwizard.com/download/v12-portable/pw12-free-64bit.zip i use Ext2Fsd 0.69, need to be installed and has a much smaller gui (but is not made for win10) principal is the same, manually assign and unassign drive letters, if you forget unassign you are "loosing" the drive letter and if you do it a few times you might need to reboot to get then free again german article about it https://xpenology.com/forum/topic/29670-howto-1-partition-des-bootsticks-in-windows-mountenbearbeiten-grubcfg/ Quote Link to comment Share on other sites More sharing options...
jensmander Posted May 26, 2020 Share #228 Posted May 26, 2020 I made an English version of the tutorial mentioned by @IG-88 in the appropiate section: 1 Quote Link to comment Share on other sites More sharing options...
afaroz61 Posted May 26, 2020 Share #229 Posted May 26, 2020 @IG-88 these same file ? extra.lzma for loader 1.03b ds3615 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... http://s000.tinyupload.com/?file_id=04147311964729253115 extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... http://s000.tinyupload.com/?file_id=05651322757917266468 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 26, 2020 Author Share #230 Posted May 26, 2020 4 hours ago, afaroz61 said: these same file ? why do you ask? the text above the links describe the difference, the description on the download page is different and even the filename is different (and the file size is also different) so you might have overlooked it at least 3 times i highlighted the numbers 3615 and 3617 in the first post so it hopefully gets not overlooked Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 26, 2020 Share #231 Posted May 26, 2020 Just to confirm, I swapped out the i5-9600K and in an i5-8600K and like magic, hw transcoding is working again. Quote Link to comment Share on other sites More sharing options...
vasiliy_gr Posted May 27, 2020 Share #232 Posted May 27, 2020 Still the same problem exist in DSM6.2.3 for ds3615 with v0.11_test: 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_sys_thermal.c:35 ioctl device failed 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_sys_voltage.c:35 ioctl device failed 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_fan_speed_rpm.c:35 ioctl device failed Repeats every minute. And this prevents HDDs from hybernation. I did not tested ds3617 variant with new extra.lzma as I think it will be the same in this case. But I can test it also if there is some sense. For installation I only copied new extra.lzma to usb drive with 1.03b loader. May be there are some more actions needed?.. Quote Link to comment Share on other sites More sharing options...
kbuddy Posted May 28, 2020 Share #233 Posted May 28, 2020 I test ds3617 junloader 1.03b with extra3617_v0.11.1_test , using the VMNET3 nic on ESXI, It seems to have failed to get the IP Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 28, 2020 Author Share #234 Posted May 28, 2020 6 hours ago, kbuddy said: I test ds3617 junloader 1.03b with extra3617_v0.11.1_test , using the VMNET3 nic on ESXI, It seems to have failed to get the IP i cant test esxi, so a serial log and look whats going on Quote Link to comment Share on other sites More sharing options...
richv31 Posted May 28, 2020 Share #235 Posted May 28, 2020 15 hours ago, vasiliy_gr said: Still the same problem exist in DSM6.2.3 for ds3615 with v0.11_test: 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_sys_thermal.c:35 ioctl device failed 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_sys_voltage.c:35 ioctl device failed 2020-05-27T18:28:47+03:00 XPEnologyX scemd: polling_fan_speed_rpm.c:35 ioctl device failed Repeats every minute. And this prevents HDDs from hybernation. I did not tested ds3617 variant with new extra.lzma as I think it will be the same in this case. But I can test it also if there is some sense. For installation I only copied new extra.lzma to usb drive with 1.03b loader. May be there are some more actions needed?.. I am not able to get HDD hibernation working on 6.2.3 3615 either. Worked fine on 6.2.2. Is there anyway to disable the polling? Quote Link to comment Share on other sites More sharing options...
kbuddy Posted May 28, 2020 Share #236 Posted May 28, 2020 14 minutes ago, IG-88 said: i cant test esxi, so a serial log and look whats going on How to get serial log ? Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 29, 2020 Share #237 Posted May 29, 2020 (edited) On 5/26/2020 at 8:47 AM, afaroz61 said: @IG-88 these same file ? extra.lzma for loader 1.03b ds3615 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... http://s000.tinyupload.com/?file_id=04147311964729253115 extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ... http://s000.tinyupload.com/?file_id=05651322757917266468 I have used these loader 1.03b DS3617 with my Dell R410 and it does not work can't find my system on network. I had try to upgrade to 6.2.3-25426 and it FALED What DS3617 Loader should I use ? I was using the DS3617 6.2.2 loader. Please help thanks... BTW I also used the extra 0.5 and that did not work. Edited May 29, 2020 by painkiller895 Quote Link to comment Share on other sites More sharing options...
stefauresi Posted May 29, 2020 Share #238 Posted May 29, 2020 (edited) Hi, I don't know why my NAS not start correctly with extra918plus0.11 no access Synology and no visible in Synology assistant If i testing with original extra in loader 1.04b my Nas it's ok but not hardware transcoding (no dev/dri) 😪 My Server Baremetal install on : i5-8600/Dual NIC intel e1000 I need your help best regards Edited May 29, 2020 by stefauresi Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 29, 2020 Share #239 Posted May 29, 2020 3 hours ago, painkiller895 said: I have used these loader 1.03b DS3617 with my Dell R410 and it does not work can't find my system on network. I had try to upgrade to 6.2.3-25426 and it FALED What DS3617 Loader should I use ? I was using the DS3617 6.2.2 loader. Please help thanks... BTW I also used the extra 0.5 and that did not work. bnx2/bnx2x firmware looks like its not working - loader 1.03b ds3617 DSM 6.2.3 v0.11.1- where is this it's not listed... Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 29, 2020 Author Share #240 Posted May 29, 2020 6 minutes ago, painkiller895 said: bnx2/bnx2x firmware looks like its not working - loader 1.03b ds3617 DSM 6.2.3 v0.11.1- where is this it's not listed... looks like i forgot to change the link after doing the text - fixed now in 1st post 1 Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 29, 2020 Share #241 Posted May 29, 2020 1 hour ago, IG-88 said: looks like i forgot to change the link after doing the text - fixed now in 1st post Thanks ! It's working on a fresh install ... Your the best ! Quote Link to comment Share on other sites More sharing options...
deadsquirrel Posted May 30, 2020 Share #242 Posted May 30, 2020 On 5/24/2020 at 8:18 PM, IG-88 said: read above, to see that you are wrong with that there are device id's that are not in the driver even when its "only" UHD630 https://xpenology.com/forum/topic/28321-driver-extension-jun-104b-for-dsm623-for-918/?do=findComment&comment=146656 synology's i915 driver date in dsm 6.2.3: 20171222 you can look up the supported device id in the binary driver with "modinfo" or just use a editor and look for vermagic, that will land you near the place about firmware and devie id's i added a comment about that and the list of device id's in the 1st post edit: i looked up a new i5-10500 and its device id is "9BC8" and there are no "9xxx" numbers in the driver we use so don't expect any newer gen10 to work even when it "only" has UHD630 https://www.intel.com/content/www/us/en/products/processors/core/i5-processors/i5-10500.html Thanks, I was just coming in this morning to correct that mistake - I cannot edit the post though.... How do I correct the discussion - or perhaps just delete the errant info so it isn't perpetuated. DeadS Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 30, 2020 Share #243 Posted May 30, 2020 (edited) I tried to update my dell R320 and Failed.... Nic is a Broadcom NetXtreme Raid controller PERC H310 Mini Xeon E5-2420v2 I did not build the Raid on the controller I build the raid on the Xpenology system it was working with 4 6TB SAS Drives I did an upgrade and system can't be found I was using DS3617 1.03b 6.2 I updated my loader with 1.03b ds3617 DSM 6.2.3 v0.11.1 this did not work. any Drivers for this system ??? I dont want to loose 8TB of data I have on there... Thanks in advance ... Edited May 30, 2020 by painkiller895 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 30, 2020 Author Share #244 Posted May 30, 2020 (edited) 5 hours ago, painkiller895 said: Nic is a Broadcom NetXtreme more specifics is needed to say anything about the driver, its a BCM5720 and thats tg3.ko Quote Raid controller PERC H310 Mini thats a normal lsi 9211-8i and i did test a fresh install with it try to boot with jun's original extra.lzma, empty /lib/modules/updates/, while still running remove usb andr eplace the original extra.lzma with the new 0.11.1, put back the usb and reboot if that does not work you still can use jun's original extra.lzma, your system does not really need the new/added drivers what dsm 6.2.x version did you used before the update? Quote I dont want to loose 8TB of data I have on there... just because a driver does not work it does not impact your data, you just cant access it the way you are used to it, if in hurry you can boot up open media vault or a recovery linux to access your mdadm raid and also a downgrade is possible without loosing the data, you would just sacrifice your dsm config (user, shares packages) Edited May 30, 2020 by IG-88 Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 30, 2020 Share #245 Posted May 30, 2020 5 minutes ago, IG-88 said: more specifics is needed to say anything abot the driver, its a BCM5720 and thats tg3.ko thats a normal lsi 9211-8i and i did test a fresh install with it try to boot with jun's original extra.lzma, empty /lib/modules/updates/, while still running remove usb and eplace the original extra.lzma with the new 0.11.1, put back the usb and reboot if that does not work you still can use jun's original extra.lzma, your system doen nor really need the new/added drivers what dsm 6.2.x version did you used before the update? I was using 6.2.2-24922 update 4 all was working well untill update Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 30, 2020 Author Share #246 Posted May 30, 2020 11 hours ago, deadsquirrel said: I cannot edit the post though.... How do I correct the discussion - or perhaps just delete the errant you can't @Polanskiman does not like when people make changes so that it changes the meaning and invalidates all the following traffic the downside might be some wrong information in the threads but they are usually corrected so when reading along its usually ok Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 30, 2020 Author Share #247 Posted May 30, 2020 4 minutes ago, painkiller895 said: I was using 6.2.2-24922 update 4 all was working well untill update that would explain the problem, i will fix it later this day but you should be able to get along the way i suggested above Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 30, 2020 Share #248 Posted May 30, 2020 (edited) 1 hour ago, IG-88 said: that would explain the problem, i will fix it later this day but you should be able to get along the way i suggested above I reflashed the USB with no extra and it updated to DSM 6.2.3-25426 Recoverd -- Do you want me to still empty /lib/modules/updates/, while still running remove usb and replace the original extra.lzma with the new 0.11.1, put back the usb and reboot ??? The system is back up and running with no extra. please advise... thanks for getting me back up. Edited May 30, 2020 by painkiller895 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 30, 2020 Author Share #249 Posted May 30, 2020 28 minutes ago, painkiller895 said: Do you want me to still empty /lib/modules/updates/, while still running remove usb and replace the original extra.lzma with the new 0.11.1, put back the usb and reboot ??? The system is back up and running with no extra. please advise... the new 0.11.2 i already up so you could just copy the new 0.11.2 to usb's 2nd partition, it it does not work the way you need you still can put back jun's original extra.lzma the loader compares driver from extra.lzma and whats on disk and overwrites it when there is a difference, so by changing the extra.lzma you can change the driver set you are using if you are happy with the result (jun's extra) the just keep it that way, as long as you don't add newer hardware like a 10G nic you won't need the added drivers from 0.11 Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted May 30, 2020 Share #250 Posted May 30, 2020 1 hour ago, IG-88 said: the new 0.11.2 i already up so you could just copy the new 0.11.2 to usb's 2nd partition, it it does not work the way you need you still can put back jun's original extra.lzma the loader compares driver from extra.lzma and whats on disk and overwrites it when there is a difference, so by changing the extra.lzma you can change the driver set you are using if you are happy with the result (jun's extra) the just keep it that way, as long as you don't add newer hardware like a 10G nic you won't need the added drivers from 0.11 Going to test it, do I still have to empty /lib/modules/updates ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.