IG-88 Posted May 20, 2020 Author Share #201 Posted May 20, 2020 1 hour ago, mervincm said: "Clean USB and HDD install. 6.2.3-25426 918+. 104b, v11 extra and extra2, plus 2 files from pat 6.2.3-25426. hw transcoding was working correctly in plex. I swapped the cpu from 8350K to 9600K and now plex will no longer hw transcode." strange root@DS2:~# dmesg | grep drm root@DS2:~# dmesg | grep i915 root@DS2:~# cat /var/log/dmesg | grep i915 root@DS2:~# cat /var/log/dmesg | grep drm root@DS2:~# cat /var/log/dmesg | grep DRM no DRM or i915 messages??? i have a i3 9100https://en.wikichip.org/wiki/intel/core_i3/i3-9100 pcie id for the gpu is "3E91" yours https://en.wikichip.org/wiki/intel/core_i5/i5-9600k pcie id for the gpu is "3E98" i looked up that number in the driver 915.ko with a editor i only find he UHD 630 id for the 9100, the UHD 630 id of the 9600k is not listed that might explain why its not found, is not supported in the driver its the same with jun's i915 driver (slightly newer source), do downgrading would not change anything the 3e98 is also used in other cpu's (that might be avoided i5-9400 i5-9600k i7-9700t i7-9700 lucky me, i was thinking about a 9400 instead of 9100 a bought Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 20, 2020 Author Share #202 Posted May 20, 2020 18 hours ago, deadsquirrel said: /dev/dri - new driver has /dev/dri/Card0 - 0.10 had /dev/dri/0 interface - same hardware. i did not change anything in that direction and its a generic driver, maybe a difference is between the 1st 6.2.3. v25423 and the 2nd 25426? 18 hours ago, deadsquirrel said: CPU Frequency governor insmod ./cpufreq_ondemand.ko - FAILS with insmod ./cpufreq_ondemand.ko insmod: ERROR: could not insert module ./cpufreq_ondemand.ko: Unknown symbol in module /var/log/messages output. 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086168] cpufreq_ondemand: Unknown symbol gov_queue_work (err 0) 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086187] cpufreq_ondemand: Unknown symbol cpufreq_governor_dbs (err 0) 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086204] cpufreq_ondemand: Unknown symbol dbs_check_cpu (err 0) there might be dependency that is missing or some specific changes in th source by synology that is missing in this module as synology did not used/need it i will look for a dependency, it its a source problem there is nothing i can do about it 18 hours ago, deadsquirrel said: Ironwolf Health Management is also running ok in 0.11 (it did not in 0.10) lsi sas connected or ahci? Quote Link to comment Share on other sites More sharing options...
Guest Posted May 20, 2020 Share #203 Posted May 20, 2020 (edited) Hello, My CPU is https://en.wikichip.org/wiki/intel/core_i5/i5-8600k PCIE ID for my gpu is "3E92" is it included to driver 915.ko with extra 0.11 for DSM 6.2.3 ? I am currently in DSM 6.2.2-6 Thx Edited May 20, 2020 by EVOTk Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 20, 2020 Share #204 Posted May 20, 2020 Is there an option to include the i965 driver or the iHD_driver? Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 20, 2020 Share #205 Posted May 20, 2020 I can confirm that the i3-8350K ID (Device ID0x3E91) works w v11 of 918+ driver extensions. Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 20, 2020 Share #206 Posted May 20, 2020 (edited) Recent plex packages include i965 and iHD drivers. 3E98 is found in both of these (just did a search with a hex editor) Edited May 20, 2020 by mervincm Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 20, 2020 Author Share #207 Posted May 20, 2020 45 minutes ago, EVOTk said: My CPU is https://en.wikichip.org/wiki/intel/core_i5/i5-8600k PCIE ID for my gpu is "3E92" is it included to driver 915.ko with extra 0.11 for DSM 6.2.3 ? yes, and slight correction, the (new) i915 driver is a "native" driver from synology originally made for geminilake units like the new DS x20+ the 0.11 extra/extra2 makes sure jun's i915 (not compatible with 6.2.3) gets deleted so the native driver from synology is loaded 1 hour ago, mervincm said: Recent plex packages include i965 and iHD drivers. 3E98 is found in both of these (just did a search with a hex editor) i dont think that will help you, without a kernel driver you won't be able to use it Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 20, 2020 Share #208 Posted May 20, 2020 so this is interesting. inside the new videostation package. 2.4.8-1611.spk there is a i965 driver ... wouldnt that mean the i965 kernal driver must be there? Quote Link to comment Share on other sites More sharing options...
yuyuko Posted May 21, 2020 Share #209 Posted May 21, 2020 will extra.lzma for 3615/3617 come out 0.0 issuse: after I moved 918 to 3617(both are 6.2.3-25426 same version with jun's original extra.lzma),i just found I can't shutdown in system, don't know why. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 21, 2020 Author Share #210 Posted May 21, 2020 6 hours ago, yuyuko said: after I moved 918 to 3617(both are 6.2.3-25426 same version with jun's original extra.lzma),i just found I can't shutdown in system, don't know why. thats usually because of drivers crashing an boot, check dmesg so find it maybe some left overs from 918+ driver set that are still loaded a safe choice is also to empty /usr/lib/modules/update/ and reboot the loader will copy all missing files from the extra.lzma on boot back and you get rid of any left overs Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 21, 2020 Author Share #211 Posted May 21, 2020 12 hours ago, mervincm said: Recent plex packages include i965 and iHD drivers. 3E98 is found in both of these (just did a search with a hex editor) that are lib's (.so files are dynamic libraries), independent from the driver and might be newer then the used (backported) driver from synology so they may contain references to newer hardware i don't think a lib will be working without a driver and the i915 is the driver for this hardware, its all UHD 630, maybe intel decided on some minor changes and gave it a new number the name i965 is used since intel graphics gen 4, so its no new standalone kernel driver for any newer hardware imho differentiating start with x11 and there might be different x11 drivers depending on the intel graphiccs gen (intel, intel 915, intel 965), but the kernel driver is all the same and the base Quote Link to comment Share on other sites More sharing options...
b10109025 Posted May 21, 2020 Share #212 Posted May 21, 2020 'megaraid_sas' causes kernel panic on my HPE ML10G9 I have Dell PERC 6i and it's working in 6.2.2, Quote Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 21, 2020 Author Share #213 Posted May 21, 2020 (edited) On 5/20/2020 at 9:10 PM, IG-88 said: Quote 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086168] cpufreq_ondemand: Unknown symbol gov_queue_work (err 0) 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086187] cpufreq_ondemand: Unknown symbol cpufreq_governor_dbs (err 0) 2020-05-20T09:16:37+10:00 XXXXX kernel: [687147.086204] cpufreq_ondemand: Unknown symbol dbs_check_cpu (err 0) there might be dependency that is missing or some specific changes in th source by synology that is missing in this module as synology did not used/need it i will look for a dependency, it its a source problem there is nothing i can do about it looks like it would need to replace other cpu-frequ driver files too (coming from synology) cpufreq_stats.ko cpufreq_powersave.ko cpufreq_performance.ko acpi-cpufreq.ko that might interfere with other things, so i#m not going to do this in a new extra/extra2 and without any substantial plan what its good for and how to use it im's not goint to invest any more time into this @deadsquirrel what exactly is you plan for using this? i guess it would need more additional code in the system to make use of it i can send you the files if you want to experiment on your own Edited May 21, 2020 by IG-88 Quote Link to comment Share on other sites More sharing options...
yuyuko Posted May 21, 2020 Share #214 Posted May 21, 2020 (edited) 14 hours ago, IG-88 said: thats usually because of drivers crashing an boot, check dmesg so find it maybe some left overs from 918+ driver set that are still loaded a safe choice is also to empty /usr/lib/modules/update/ and reboot the loader will copy all missing files from the extra.lzma on boot back and you get rid of any left overs thanks. I did rm -rf /usr/lib/modules/update/ and reboot ,it doesn't work for me. I also tried let my friends give me all files from modules folder and replace all,doesn't work too.(3617 dsm6.2.3-25426 works on his mechine) how to use dmesg commands to check errors from logs. Edited May 22, 2020 by yuyuko Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 22, 2020 Author Share #215 Posted May 22, 2020 1 minute ago, yuyuko said: how to use dmesg commands to check errors from logs. dmesg | more space to scroll page, strg-c to end it its also a file /var/log/dmesg Quote Link to comment Share on other sites More sharing options...
yuyuko Posted May 22, 2020 Share #216 Posted May 22, 2020 1 hour ago, IG-88 said: dmesg | more space to scroll page, strg-c to end it its also a file /var/log/dmesg 0.0,all dmesg log here. dmesg.log Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 22, 2020 Author Share #217 Posted May 22, 2020 (edited) 8 hours ago, yuyuko said: 0.0,all dmesg log here. no drivers crashing, some acpi errors i'd need to compare with a test system (i'm testing 315/17 new extra.lzma, so additional work as i'm looking into demsg anyway) maybe you can try to reduce some acpi / power management features in bios for testing, 3617 has a older kernel then 918+, like using older or dumped down acpi version maybe disabling HT and using 918+ is a option (when shutdown is working with it) Edited May 22, 2020 by IG-88 Quote Link to comment Share on other sites More sharing options...
yuyuko Posted May 22, 2020 Share #218 Posted May 22, 2020 (edited) 59 minutes ago, IG-88 said: no drivers crashing, some acpi errors i'd need to compare with a test system (i'm testing 315/17 new extra.lzma, so additional work as i'm looking into demsg anyway) maybe you can try to reduce some acpi / power management features in bios for testing, 3617 has a older kernel then 918+, like using older or dumped down acpi version maybe disabling HT and using 918+ is a option (when shutdown is working with it) thx,I'll try with acpi/power bios settings,see if it can fix it. why i want to use 3617: 1.918 only can detect 4C/8T , 3617 can work with 8C/16T. 2.918 only can active 2 nics there,3617 can active at least 4 XD, hope u have a great weekend. still looking forward to the day when 3617/15 new extra.lzma comes out~ Edited May 22, 2020 by yuyuko Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 22, 2020 Author Share #219 Posted May 22, 2020 2 minutes ago, yuyuko said: 2.918 only can active 2 nics there,3617 can active at least 4 thats just a small change in synoinfo.conf that a documented, i use 3 nic's in my 918+ system i reference to this in the 1st post in the thread about 6.2.2 https://xpenology.com/forum/topic/12679-progress-of-62-loader/page/9/?tab=comments#comment-92682 6 minutes ago, yuyuko said: 1.918 only can detect 4C/8T , 3617 can work with 8C/16T. yes i guessed that from your cpu, but the limit is not about "threads" ts just cores, the kernel config states 8 cores for 918+ so if you disable HT you can have all 6 cores used in 918+ and would loose only minor performance as HT is far from that much of a gain Quote Link to comment Share on other sites More sharing options...
richv31 Posted May 22, 2020 Share #220 Posted May 22, 2020 (edited) I have a J4105B-ITX board with a dell perc controller flashed to IT mode (LSI 9211-8i). The 918+ 6.2.3 install seems to be using the mpt3sas driver that I thought was only for 12gbs controllers (instead of the mpt2sas). Is this expected? 0000:01:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Dell 6Gbps SAS HBA Adapter Flags: bus master, fast devsel, latency 0, IRQ 22 I/O ports at e000 [disabled] [size=256] Memory at a1140000 (64-bit, non-prefetchable) [size=64K] Memory at a1100000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at a1000000 [disabled] [size=1M] Capabilities: [50] Power Management version 3 Capabilities: [68] Express Endpoint, MSI 00 Capabilities: [d0] Vital Product Data Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [c0] MSI-X: Enable+ Count=15 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Power Budgeting <?> Kernel driver in use: mpt3sas Also, I think I may have found a problem with how the sas controller behaves on 918+. I have a raid-0 volume with 4 drives and a second (basic) volume on a single drive. I can configure HDD hibernation and the drives will enter hibernation fine. However, when I wake them up, the drive with the single volume is fine, but the raid-0 volume ends up with "unable to access system partition" error and a prompt to repair the partition. I think on wake up, the 4 drives making up the raid-0 volume reappear in a different order causing the system partition to fail. I do not have this problem on 6.2.3/3615/1.03b. Any thoughts if the drive order can be fixed? Edited May 22, 2020 by richv31 Quote Link to comment Share on other sites More sharing options...
deadsquirrel Posted May 24, 2020 Share #221 Posted May 24, 2020 On 5/21/2020 at 5:10 AM, IG-88 said: Quote Ironwolf Health Management is also running ok in 0.11 (it did not in 0.10) lsi sas connected or ahci? ahci Quote Link to comment Share on other sites More sharing options...
deadsquirrel Posted May 24, 2020 Share #222 Posted May 24, 2020 On 5/21/2020 at 6:27 AM, EVOTk said: Hello, My CPU is https://en.wikichip.org/wiki/intel/core_i5/i5-8600k PCIE ID for my gpu is "3E92" is it included to driver 915.ko with extra 0.11 for DSM 6.2.3 ? I am currently in DSM 6.2.2-6 Yes, it is - all intel integrated cpu graphics from sandy bridge ix-2xxx to ix-9xxx included, preumable the ix-10xxx as well as they are still UHD620 interfaces. Excluding the 'F' parts, of course (F=disabled GPU on chip) DeadS Quote Link to comment Share on other sites More sharing options...
IG-88 Posted May 24, 2020 Author Share #223 Posted May 24, 2020 (edited) 7 hours ago, deadsquirrel said: Yes, it is - all intel integrated cpu graphics from sandy bridge ix-2xxx to ix-9xxx included, preumable the ix-10xxx as well as they are still UHD620 interfaces. read above, to see that you are wrong with that there are device id's that are not in the driver even when its "only" UHD630 https://xpenology.com/forum/topic/28321-driver-extension-jun-104b-for-dsm623-for-918/?do=findComment&comment=146656 synology's i915 driver date in dsm 6.2.3: 20171222 you can look up the supported device id in the binary driver with "modinfo" or just use a editor and look for vermagic, that will land you near the place about firmware and devie id's i added a comment about that and the list of device id's in the 1st post edit: i looked up a new i5-10500 and its device id is "9BC8" and there are no "9xxx" numbers in the driver we use so don't expect any newer gen10 to work even when it "only" has UHD630 https://www.intel.com/content/www/us/en/products/processors/core/i5-processors/i5-10500.html Edited May 24, 2020 by IG-88 Quote Link to comment Share on other sites More sharing options...
yuyuko Posted May 25, 2020 Share #224 Posted May 25, 2020 On 5/22/2020 at 5:19 PM, IG-88 said: no drivers crashing, some acpi errors i'd need to compare with a test system (i'm testing 315/17 new extra.lzma, so additional work as i'm looking into demsg anyway) maybe you can try to reduce some acpi / power management features in bios for testing, 3617 has a older kernel then 918+, like using older or dumped down acpi version maybe disabling HT and using 918+ is a option (when shutdown is working with it) I've tested with all ACPI/power settings(with i can see in the pages) on bios,after verious attempts it still can't work T_T Quote Link to comment Share on other sites More sharing options...
chilly Posted May 25, 2020 Share #225 Posted May 25, 2020 0.11 with ASROCK J4105 and 6.2.3 works with HW Transcoding needed to do the serial number patch first. I could also not access to my old usb stick on win7 and win10 with win32imager, so i needed to create a new one. Old usb stick is no usable....not that important by may somebody know how to solve it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.