Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Elite 8300 SFF - i5-3470, on board Intel NIC

- Additional comments: Hybrid-formatted bootloader - Plex user lost permissions to Plex share after update (review access permissions in Shared Folder, User and Group settings in Control Panel to fix).

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: No (followed instruction by @flyride  and removed the real3x mod)

- Installation type: BAREMETAL - ASRock J4105-ITX

- Comments: no /dev/dri (missing Gemini Lake firmware)

Edited by mushr00m
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - ESXi 7.0.0 on Microserver  Gen8 Xeon 1270v2

- Additional comment : synoboot showing as eSata disk

 

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen8 Xeon 1240v2

- Additional comment : extra Network Card HPE NC364T

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 5

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: No (followed instruction by @flyride  and removed the real3x mod)

- Installation type: BAREMETAL - ASRock Q1900-ITX

- Comments: Custom NIC Intel e1000e

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.03a2 - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL

- Comments: Custom NIC Intel e1000e

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: Jun's Loader v1.03B DS3615xs

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.1.8

- Additional comment : NIC Intel e1000, Synoboot recognized as SATA drive

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: Yes - extra.lzma/extra2.lzma for loader 1.04b_mod ds918+ DSM 6.2.2 v0.8_syno

- Installation type: BAREMETAL - Asrock J4105

- Additional comment : After update the integrated network card (Realtek) does not work. The USB network card that I have works but detects that the installation must be repaired and once it is repaired neither of the two cards works

 

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Asrock J4105

- Additional comment :  All network cards works without changes in jun's loader. It'sn necesary change extra.lzma

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh install

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock Beebox Intel N3000 / SSD 480GB Kingston 

- Additional comments: REBOOT REQUIRED /  Transcoding had been disabled

Link to post
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B DS3617xs

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.1.8

- Additional comment : NIC Intel e1000e - (maybe der is no need for e1000e anymore), Synoboot is mounted as USB-Drive

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant ML10 Gen9, Xeon E31275 v5

Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 5

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: YES (v0.1 for 6.23)

- Installation type: VM(unraid) - e3 1280 v3, on board lsi2308 passthrough, on board Intel NIC

- Additional comments: SMART info is not showing, might be a bug in extra.lzma

Edited by sarieri
Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: YES (v0.1 for 6.23)

- Installation type: Baremetal Asrock J4105B-ITX, on board lsi9211 passthrough.

- Additional comments: SMART info is not showing.

Edited by Eduardo
Add text color
Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  None

- Loader version and model: Jun's Loader v1.03b - DS3515xs

- Using custom extra.lzma: NO

- Installation type: VM - UNRAID - Gigabyte C246-WU4 - RAM 64Gb DDR4 ECC - Intel Xeon E-2176G - Pass-through Integrated LAN Intel

- Additional comments: Before the reboot DSM was mounting the USB bootloader? Usbshare 1-1 and Usbshare 1-2.

UPDATE: Tried changing the USB to sata and it still works and the USB mount is gone

 

image.thumb.png.6e9889e65b19e8b68bddf38a4e4a9f12.png

Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: YES (v0.10 for 6.23)

- Installation type: BAREMETAL - Asrock h370m-itx/ac + i3-9100 + 16GB DDR4

- Additional comments: intel i219 and i211 is working, smart info is ok

  • Thanks 1
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional comments:Intel nic, phpvirtualbox works, powerbutton works

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver N54L Gen7

- Additional comments: Intel Quad Nic,  phpvirtualbox works, powerbutton works

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

- Additional comments: Intel nic, I had to force the update manually because DSM did not see it. But the update is successul

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N36L

- Additional comments: Intel Nic, manual update 

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - ESXI 6.7 U2 - Dell T110 II

- Additional comments: Use Flyride script for synoboot mounted as satashare1-*

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.1.7 update 2

- Loader version and model: Jun's Loader v1.03B 3617

- Using custom extra.lzma: No

- Installation type: Bare  metal Asrock H370M

- Additional comment :  I did all pre testing in Vm environments and also on my live production baremetal xpenology, with a separate USb and a separate disk drive to make sure my upgrade from jun 1.02b DSM 6.1.7 for my DS3617 would go smooth to 6.2.3 using 1.03b loader. Everything looked normal for days. So i decided to pull the trigger.

I upgrade, box boots up fine, goes into dsm 6.2.3, using 1.0.3 stock loader. However i have strange glitches in my gui, my installed packages are not starting.

My data shares are not mounting. I can see that in the storage manager the file shares are there, my HDD and volumes are all good!!

Its like none of the services are starting!!!! Every page and control panel item i visit and try to change a config. I get error "operation failed. please login to dsm and try again".I thought maybe it was related to 2-step verification somehow, but doesnt look like it.

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03b 3617XS

- Using custom extra.lzma: No

- Installation type: VM - ESXi 6.5U3, E5 2620, HP ProLiant DL380p Gen8

- Additional comment : Using e1000e NIC, Failed when using custom extra.lzma by IG-88, succeed when using original extra.lzma

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-6

- Loader version and model: JUN'S LOADER v1.03b - 3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Thecus N4800 Nas

- Additional comment: reboot required - Stock NIC

Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -i5 4460 MSI B85-G43

- Additional comments: Realtec network card still working

Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: YES (v0.10 for 6.23)

- Installation type: BAREMETAL - Asrock J4105-ITX 32GB RAM

- Additional comments: /dev/dri/* finally exists, just a quick restart, all looks fine

Link to post
Share on other sites
  • Polanskiman changed the title to DSM 6.2.3-25423 - Recalled on May 13
  • Polanskiman locked and unfeatured this topic
Guest
This topic is now closed to further replies.