Jump to content
XPEnology Community

DSM 6.2.3-25423 - Recalled on May 13


gadreel
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

507962861_Screenshot_2020-04-15DS918ReleaseNotesSynologyInc(1).thumb.png.39cc38cf2500f6a12c822ac81c4fe867.png

https://www.synology.com/en-global/releaseNote/DS3615xs

Spoiler

Version: 6.2.3-25423

(2020-04-15)

 

Important Note

  1. The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly.
  2. This update will restart your Synology NAS.
  3. Removed the support for Google Cloud Print in DSM 6.2.3 and above.
  4. To avoid the interruption of iSCSI service, the automatic DSM update and your power schedule to shut down may not be executed as expected if there are any active iSCSI sessions.
  5. Removed TWNIC from the list of DDNS service providers on DSM 6.2.3 since TWNIC will stop accepting new registrations for DSM as of Jul. 1, 2020. Your current TWNIC DDNS services can still be used and edited but will not be available again once deleted from DSM.
  6. This is the last major DSM version (6.2) that supports the video conversion to .flv and MPEG-4 Part 2 on certain models (RS814, RS214, DS414, DS414slim, DS414j, DS216se, DS215j, DS214+, DS214, DS214se, DS213j, DS120j, DS119j, DS115, DS115j, and DS114) in consideration of the termination of Adobe's support for Flash Player by the end of 2020.

 

What's New in DSM 6.2.3

  1. Thin Provisioning LUN will become protected upon insufficient volume space, preventing clients from writing data to the LUN while allowing read-only access to the existing data.
  2. Added support to sign in to DSM using a UPN (user principal name) of a domain via web portal and file protocols.
  3. Added support for the option of forcing password changes for importing local users.
  4. Enhanced the compatibility of the imported user list, providing clearer error messages when the imported file contains syntax errors.
  5. Added support to record only the events of SMB transfer selected by the user, providing transfer logs that meet the requirements more closely.
  6. Added support for client users to monitor the changes of subdirectories under shared folders via SMB protocol.
  7. Added details of desktop notifications to facilitate users' timely responses.
  8. Added support for external UDF file system devices.
  9. Added support for the Open vSwitch option in a high-availability cluster.
  10. Added support for IP conflict detection, providing logs and notifications accordingly.
  11. Added support for Let's Encrypt wildcard certificates.
  12. Added support to waive the need of DSM login again through an HTTPS connection after a change in client's IP address.
  13. Added support for hardware-assisted locking for Thick Provisioning LUN on an ext4 volume.
  14. Added support for Synology SSD and the settings to provide proper warnings when the time-based estimated lifespan reaches the specified value.
  15. Added support for customized footer message on DSM login pages.

 

Fixed Issues

  1. Fixed the issue where certain cities might be mapped to incorrect time zones.
  2. Fixed the issue where LDAP users could not be notified of the upcoming password expiration.
  3. Fixed the issue where the upload of LDAP certificate could not overwrite the original one with the same file name.
  4. Fixed the issue where the application permissions settings might not be applied properly to the Domain Users group when such group in Windows AD domain was named other than "Domain Users".
  5. Fixed the issue of inaccurate time of usage history in Resource Monitor.
  6. Improved system responsiveness by reducing the latency of the Btrfs file system in certain scenarios.
  7. Fixed the issue where SNMP did not provide the indices of Disk and RAID correctly.
  8. Fixed the issue where the recycle bin of an encrypted shared folder might be emptied properly.
  9. Enhanced the DSM login performance for multiple concurrent logins.
  10. Adjusted the personal notification mechanism to comply with the latest Gmail API.
  11. Fixed the issue where the iSCSI service might be interrupted when the LUN backup task is stopped.
  12. Removed the function of expanding the capacity of a block LUN.

 

Known Issues & Limitations

  1. Access to DSM via HTTPS using Google Chrome on a client device running macOS 10.15 might fail after a DSM update from an older version.

 

  • Like 1
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: UNRAID - ASRock H370M itx/ac - RAM 32Gb DDR4 NON-ECC - Intel Core i5 9400F - Pass-through Integrated LAN Intel I211

- Additional comments: Reboot required by the update - This was on a TEST VM Machine. Also, I realized after the reboot DSM was mounting the USB bootloader. I reapplied the grub.cfg with some new Vendor and Product IDs and they disappeared.

Link to comment
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes - extra.lzma for loader 1.03b_mod ds3615 DSM 6.2.2 v0.5_test (from IG-88)

- Installation type: BAREMETAL - Jetway NC62K with AMD Athlon X2 4850e - 2GB DDR2

- Additional comment: After reboot still unsuccessful

Edited by PaulV
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 5

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Gigabyte N3150N-D3V

- Additional comments: the video adapter is disabled in the BIOS !!! / Reboot required by the update 

Link to comment
Share on other sites

 - Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: Yes - extra.lzma/extra2.lzma for loader 1.04b_mod ds918+ DSM 6.2.2 v0.8_syno

- Installation type: BAREMETAL - Lenovo E50-00 MB with J2900 CPU /with realtek LAN and with i350-t2 (RT disabled in BIOS)

- Additional comment : After reboot still unsuccessful. Creating new usb with same
  extra.lzma/extra2.lzma + zImage and rd.gz from 6.2.3-25423 + execute rm -rf /usr/lib/modules/update/*
  and rm -rf /usr/lib/firmware/i915/* before reboot -still unsuccessful. All of above
  tried with Realtek MB LAN (8168) and Intel i350-T2
  Look below how to resolve.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Lenovo E50-00 MB with J2900 CPU / i350-t2 LAN

- Additional comment : Created FRESH USB boot stick v1.04b -DS918+ without any
  extra.lzma/extra2.lzma and executed recovery - 5 min. job.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen8 Xeon 

- Additional comment : with extra Network Card SFP+ 10Gbit Intel X520-DA2 10 Gigabit 10GBe SFP+ Dual Port Ethernet Server Network Adapter. Also, CPU Info hack is not working with the newest DSM 6.2.3-25423 it shows still i3 Processor

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7U2

- Comments: Test VM.  Boot loader no longer aliased as /dev/synoboot but displayed as /dev/sdm. "satashare-x" appeared in Control Panel and File Station

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 5

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7U2

- Comments: Test VM.  Boot loader no longer aliased as /dev/synoboot but displayed as /dev/sdm

 

/dev/synoboot is broken on ESXi and DSM 6.2.3.  This has a number of negative implications. See here for resolution and a warning for arrays larger than 12 disks

Edited by flyride
  • Thanks 3
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DS918+ DSM 6.2.2-24922 (Update 6)
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VM - VMWare/ESXi
- Additional comments: VMware Workstation 15.5 + PC Desktop (AMD Ryzen 5, W10)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-X150M-PLUS / Cpu : E3-1240L v5 / Ram : 16G Ecc / Nic : RTL8111

- Additional Comment: Reboot required

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - ASRock J4105-ITX, RAM 8GB, SSD WD 500GB;  Powerman ME-100 60W  Win10 + VMWare WS Player 15 + 918DSM

- Additional Comment: Reboot required

 

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL, ASRock E3C226D2I, Xeon E3-1285L v3, RAM 16 GB;  4TB*3 WD Blue; SSD WB Blue 500GB; Ablecom CS-M50 250W; UPS Ippon 650

- Additional Comment: Reboot required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL, ASRock Z390M-ITX/ac, Core i3 9100, RAM DDR4 16GB

- Additional Comment: Reboot required / Important! - After installation of DSM 6.2.3 HW Transcoding had been disabled. dev/dri folder disappeared. Some other users who had updated report the same issue.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2 - 24922 - Update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL PowerEdge T30 (Xeon)

- Additional comments: Reboot required - and a second one to reinstall Filebot-package

  • Like 1
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - (ASRock B250M Pro4 | i5-6400T |  Intel X520-DA1 | 4x WD Red 3TB, 2x Intenso NVME 120GB)

- Additional comments: Reboot required by the update. But the Nvme Cache doesnt works after the Update!

  • Like 1
Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED /  Important! - After installation of DSM 6.2.3 PLEX HW Transcoding had been disabled :(

  • Sad 1
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.04b - DS3615xs

- Using custom extra.lzma: YES

- Installation type: Dell 7010 Intel i5 16Gb ECC Ram

- Additional comments: Reboot required by the update - This was on a Real Machine

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 5
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI H110M-VH PLUS | NIC: Realtek RTL8111H Gigabit LAN controller | Intel G4400
- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 7.0 on top of NUC7i5BNH
- Additional comments: REBOOT REQUIRED, Some System of configurations have been reset to default (i.e. free port 80 in mustaches, contents in /usr/bin).

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL (but see comments)

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: YES - real3x mod (but see comments)

- Installation type: BAREMETAL - ASRock J4105-ITX

- Comments: no /dev/dri (missing Gemini Lake firmware)

 

NVMe code is new. The original NVMe patch does not work. I uninstalled NVMe cache as a prerequisite prior to upgrade and recommend that you do too.  NVMe cache is reinstalled and working fine after applying the updated patch here.

 

ASRock J/Q-series motherboards require extra.lzma or real3x mod to boot DSM 6.2.2. 6.2.3 is verified to install on J4105-ITX with no mods. So I chose to revert real3x mod immediately prior to invoking the upgrade with the following procedure:

Spoiler

 

# mkdir /mnt/synoboot2

# cd /dev

# mount synoboot2 /mnt/synoboot2

# cd /mnt/synoboot2

# <copy/rename/restore the original 1.04b extra.lzma and extra2.lzma to this folder, extract them from boot loader second partition if necessary>

# cd /

# umount /mnt/synoboot2

(do not skip this umount step or your upgrade will fail with Error 21)

# rm /usr/lib/modules/update/*

# rmdir /usr/lib/modules/update

 

Now install the 6.2.3 upgrade via Control Panel Manual DSM update prior to reboot, or your system will be bricked with no access to LAN!

 

 

Edited by flyride
  • Thanks 4
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N40L

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Microserver  Gen7 N54L

Edited by christosd
  • Like 1
  • Thanks 4
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615XS

- Using custom extra.lzma: No

- Installation type: BAREMETAL - E5-2678v3 / i350-t2 (Aliexpress) LAN

- Additional comment : 
1. Recognize even on-board LANs that have been disabled by BIOS.

2. Wildcard certificates are not applied.

3. There is a problem with transcoding.

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B 918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Intel Core I3, Gigabyte GA-H97-D3H, on board Nic.

- Additional comment : reboot, very fast under 1 Minute.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.1 - HP Microserver  Gen8 E3-1230 V2

- Additional comment : Custom NIC e1000e

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 6

- Loader version and model: Jun's Loader v1.03B 3615XS

- Using custom extra.lzma: No

- Installation type: VM - Proxmox 6.1-8, Ryzen 5 1600AF, GA-AB350-Gaming 3

- Additional comment : Custom NIC e1000e, HDD's pass trough. For now it works like a charm.

Link to comment
Share on other sites

  • Polanskiman changed the title to DSM 6.2.3-25423 - Recalled on May 13
  • Polanskiman locked and unfeatured this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...