Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 6 - Re-released March 24


Polanskiman
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Screen Shot 2020-03-18 at 11.33.20.jpg

 

https://www.synology.com/en-global/releaseNote/DS3615xs

Spoiler

(2020-03-17)

Important Note

1. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

2. This update will restart your Synology NAS.

 

What's New

1. RS4017xs+ now supports D4EC-2666-16G memory module.
 

Fixed Issues

1. Improved drive migration compatibility for certain combinations of devices and DSM versions.

2. Improved the stability of iSCSI sessions on VMware hosts running EXSi 6.7 U3.

3. Fixed an issue where the system might unexpectedly reboot when users run remote virtual machines on certain models in an unstable network environment.

 

Link to comment
Share on other sites

  • Polanskiman changed the title to DSM 6.2.2-24922 Update 6 - Recalled by Synology on March 18
  • Polanskiman locked this topic

Critical Update 6 has been put back online today, March 24, after being recalled by Synology on March 18, one day after it was released.

Considering the MD5 hash and modification dates are exactly the same as the original update, this indicates the update was not modified by Synology.

I would advise some caution. Carefully consider why Synology initially recalled the update and see if this could have any impact on your box.

 

I am opening the thread again.

  • Thanks 1
Link to comment
Share on other sites

  • Polanskiman changed the title to DSM 6.2.2-24922 Update 6 - Re-released March 24
  • Polanskiman unlocked this topic

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: YES (IG-88 v0.8 syno)

- Installation type: BAREMETAL – HP EliteDesk 800 G3 Mini 35W / Intel i7 6700T / Intel Q270 / 8 GB RAM / 1 TB Toshiba HD 2.5 mm / NIC Intel I219LM Gigabit LOM 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 5

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-X150M-PLUS / Cpu : E3-1240L v5 / Ram : 16G Ecc / Nic : RTL8111

- Additional Comment: Reboot required

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 5

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: manual reboot required | NIC: HP NC-360T

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - ESX 6.5, ESX 6.7u3

- Additional comment: reboot required! | NIC: E1000e

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs and DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox 6.1-8

- Additional comment: reboot required | NIC: E1000e

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-5

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V

- Additional comments: Reboot required

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 5

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: UNRAID - ASRock H370M itx/ac - RAM 32Gb DDR4 NON-ECC - Intel Core i5 9400F - Pass-through Integrated LAN Intel I211

- Additional comments: Reboot required by the update

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI Z270 Gaming Pro - i7-7700k  - RAM 16 GB DDR4

- Additional comments: Reboot required

Edited by thedaggert
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 9020

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB)

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 5

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASRock Z390M-ITX/ac, Core i3 9100, RAM DDR4 16GB

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: Reboot required | NIC: HP NC-360T

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM Workstation 15 from HP Proliant ML110 G7 E1220

- Additional comment: 2 Reboot required | Approx 5min installation

Edited by Tictac
Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922- update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8

- Additional comment: manual reboot required: Intel NIC PCIe

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: reboot required

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X8DTI-F / NIC: Intel 82576 Dual-Port Gigabit Ethernet, plus an Intel EXPI9301CTBLK PRO1000 Network Card CT PCIex / Chipset: Dual Intel E5620 Xeon / SATA Additional Controllers: Lindy 4 port SATA 3 PCIe /  Disks: 8 x 8TB WD Red, 1 x 256GB SSD

- Additional comments: After manual reboot everything recognised and working

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: Yes - extra.lzma for loader 1.03b_mod ds3617 DSM 6.2.2 v0.5_test (from IG-88)

- Installation type: BAREMETAL - HP MediaSmart EX490 with Celeron 450

- Additional comment: After manual reboot everything recognised and working

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: Clean Installation
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VMWare/ESXi
- Additional comments: Installed latest available update (DSM 6.2.2-24922 Update 6) + VMware Workstation 15 + PC Desktop (AMD Ryzen 5, W10)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...