TyphoonNL Posted March 13, 2020 Share #1 Posted March 13, 2020 (edited) so i have been working on this mod (that works on DSM 5.x) but i have some problems perhaps you guys can help me (i hope) so i installed the DSM on a 512GB ssd (dont ask, it was my spare ssd) just for testing after that i added a volume like any normal person would do upon inspecting the partitions (using Paragon Hard Disk Manager 15) i could clearly see an empty 126MB partition so i formatted it (FAT16) installed grub2 on and installed the contents of Jun's mod loader (the one with the MBR partition) excluding the EFI and some files/folders from the grub folder i booted and got the grub loader menu and put these commands in there: set cmdpath=(hd0) then i edited the VMWARE one and changed: set img= to: set img=(hd0,msdos4) and it boots but the page is empty and there are some errors patching file etc/rc patching file etc/synoinfo.conf patching file linuxrc.syno patching file usr/sbin/init.post START /linuxrc.syno Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module ehci-hcd ... [ OK ] :: Loading module ehci-pci ... [ OK ] :: Loading module ohci-hcd ... [ OK ] :: Loading module uhci-hcd ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module etxhci-hcd ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading module BusLogic ... [ OK ] :: Loading module vmw_pvscsi ... [ OK ] :: Loading module megaraid_mm ... [ OK ] :: Loading module megaraid_mbox ... [ OK ] :: Loading module megaraid ... [ OK ] :: Loading module scsi_transport_spi ... [ OK ] :: Loading module mptbase ... [ OK ] :: Loading module mptscsih ... [ OK ] :: Loading module mptspi ... [ OK ] :: Loading module mptsas ... [ OK ] :: Loading module mptctl ... [ OK ] :: Loading module ata_piix[ 3.262854] ata2: Read current link speed fail, retry 1 [ 3.269854] ata2: Read current link speed fail, retry 2 [ 3.276851] ata2: Read current link speed fail, retry 3 [ 3.293855] ata3: Read current link speed fail, retry 1 [ 3.300854] ata3: Read current link speed fail, retry 2 [ 3.307890] ata3: Read current link speed fail, retry 3 ... [ OK ] :: Loading module megaraid_sas ... [ OK ] :: Loading module mpt2sas ... [ OK ] :: Loading module mpt3sas ... [ OK ] Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 Exit on error [1] DISK NOT INSTALLED... Fri Mar 13 20:05:23 UTC 2020 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=1022484k,nr_inodes=255621,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 1 starting pid 3963, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [ OK ] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] mdadm: error opening /dev/md1: No such file or directory rc: Use all internal disk as swap. rc: No internal disk installed. swapon: can't stat '/dev/md1': No such file or directory :: Loading module sg ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module dca ... [ OK ] :: Loading module e1000e ... [ OK ] :: Loading module i2c-algo-bit ... [ OK ] :: Loading module igb ... [ OK ] :: Loading module ixgbe ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module libcrc32c ... [ OK ] :: Loading module mii ... [ OK ] :: Loading module libphy ... [ OK ] :: Loading module atl1 ... [ OK ] :: Loading module atl1e ... [ OK ] :: Loading module atl1c ... [ OK ] :: Loading module alx ... [ OK ] :: Loading module uio ... [ OK ] :: Loading module ipg ... [ OK ] :: Loading module jme ... [ OK ] :: Loading module skge ... [ OK ] :: Loading module sky2 ... [ OK ] :: Loading module ptp_pch ... [ OK ] :: Loading module pch_gbe ... [ OK ] :: Loading module qla3xxx ... [ OK ] :: Loading module qlcnic ... [ OK ] :: Loading module qlge ... [ OK ] :: Loading module netxen_nic ... [ OK ] :: Loading module sfc ... [ OK ] :: Loading module e1000 ... [ OK ] :: Loading module pcnet32 ... [ OK ] :: Loading module vmxnet3 ... [ OK ] :: Loading module bnx2 ... [ OK ] :: Loading module bnx2x ... [ OK ] :: Loading module cnic ... [FAILED] :: Loading module r8169 ... [ OK ] :: Loading module tg3 ... [ OK ] :: Loading module usbnet ... [ OK ] :: Loading module ax88179_178a ... [ OK ] :: Loading module button ... [ OK ] mount: open failed, msg:No such file or directory mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such device ln: /proc/bus/usb/devices: No such file or directory :: Loading module synobios ... [ OK ] udhcpc (v1.16.1) started eth0 Link encap:Ethernet HWaddr 00:11:32:2C:A7:85 inet addr:192.168.3.48 Bcast:192.168.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1480 (1.4 KiB) TX bytes:1540 (1.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 (15): upnp:rootdevice (51): uuid:upnp_SynologyNAS-0011322ca785::upnp:rootdevice (56): Synology/synology_bromolow_3615xs/6.1-15047/192.168.3.48 (45): http://192.168.3.48:5000/description-eth0.xml Connected. done. /usr/syno/bin/reg_ssdp_service 192.168.3.48 0011322ca785 6.1-15047 synology_bromolow_3615xs eth0 Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... cat: can't open '/sys/block/sd*/device//model': No such file or directory Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module hid ... [ OK ] :: Loading module usbhid ... [ OK ] ============ Date ============ Fri Mar 13 20:05:34 UTC 2020 ============================== starting pid 5584, tty '': '/sbFri Mar 13 20:05:36 2020 DiskStation login: so yeah, i need some help, i really want to make this work Edited March 13, 2020 by TyphoonNL Quote Link to comment Share on other sites More sharing options...
TyphoonNL Posted March 13, 2020 Author Share #2 Posted March 13, 2020 Well i have done it and its working well only getting a small popup error telling me something happened with Disk 2 Quote The system has detected one or more crashed storage spaces. Please check the following expansion units and hard disks are connected properly and functioning normally: [Disk 2]. well, so much for saying that this can't be done because i have done it it looks like this: Quote Link to comment Share on other sites More sharing options...
TyphoonNL Posted March 20, 2020 Author Share #3 Posted March 20, 2020 i made a tutorial of how i did it but it needs to be accepted by the staff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.