Jump to content
XPEnology Community

NEW DSM 5.1-5004 AVAILABLE !!


Recommended Posts

u can find it into the hda1.tgz inside the .pat

 

Yet a better place would be inside rd.gz, which is an lzma compressed cpio archive. I thin the hda1.tgz is used for the SATA DOM (or only the installed synology partition) where as the rd.gz is the actual ramdisk used as rootfs during system startup of Synology systems.

 

@Difference between nanoboot

From what I see from my inspection is that it basically uses the old way of assembling a ramdiskfs. That is bundling it inside the kernel image (=zImage). See https://www.kernel.org/doc/Documentatio ... tramfs.txt for further details.

 

However, there are also different boot parameters such as upgrade= that is not present with our current available gnoboot source code. Therefore, I believe there are changes (even though probably very subtile ones) in the nanoboot source.

Link to comment
Share on other sites

My log files. DS1010+ 5.1-5021 Update 2 installed.

Messages:

Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: RSDP 00000000000f9db0 00014 (v00 ACPIAM)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: RSDT 000000003f690000 0003C (v01 041610 RSDT1824 20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: FACP 000000003f690200 00084 (v01 041610 FACP1824 20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: DSDT 000000003f690440 06848 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: FACS 000000003f69e000 00040
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: APIC 000000003f690390 0006C (v01 041610 APIC1824 20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: MCFG 000000003f690400 0003C (v01 041610 OEMMCFG  20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: OEMB 000000003f69e040 00072 (v01 041610 OEMB1824 20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: HPET 000000003f69a440 00038 (v01 041610 OEMHPET  20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] ACPI: GSCI 000000003f69e0c0 02024 (v01 041610 GMCHSCI  20100416 MSFT 00000097)
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Zone PFN ranges:
Dec 30 00:12:35 DiskStation kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Dec 30 00:12:35 DiskStation kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Dec 30 00:12:35 DiskStation kernel: [    0.000000]   Normal   empty
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Movable zone start PFN for each node
Dec 30 00:12:35 DiskStation kernel: [    0.000000] early_node_map[2] active PFN ranges
Dec 30 00:12:35 DiskStation kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Dec 30 00:12:35 DiskStation kernel: [    0.000000]     0: 0x00000100 -> 0x0003f690
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256059
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Internal HD num: 0
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Internal netif num: 2
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Synology Hardware Version: DS1010+-j
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Mac1: XXXXXXXXXXXX
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Mac2: XXXXXXXXXXXX
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Serial Number: XXXXXXXXXX
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Fast TSC calibration using PIT
Dec 30 00:12:35 DiskStation kernel: [    0.000000] Detected 1662.490 MHz processor.
Dec 30 00:12:35 DiskStation kernel: [    0.035997] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
Dec 30 00:12:35 DiskStation kernel: [    0.125988] TSC synchronization [CPU#0 -> CPU#1]:
Dec 30 00:12:35 DiskStation kernel: [    0.125988] Measured 50 cycles TSC warp between CPUs, turning off TSC clock.
Dec 30 00:12:35 DiskStation kernel: [    0.128205]  #2
Dec 30 00:12:35 DiskStation kernel: [    0.207165]  #3 Ok.
Dec 30 00:12:35 DiskStation kernel: [    0.335117] raid6: int64x1    347 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.353000] raid6: int64x2    550 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.371011] raid6: int64x4    597 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.388989] raid6: int64x8    683 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.407031] raid6: sse2x1     613 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.425000] raid6: sse2x2    1109 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.442955] raid6: sse2x4    1937 MB/s
Dec 30 00:12:35 DiskStation kernel: [    0.443946] raid6: using algorithm sse2x4 (1937 MB/s)
Dec 30 00:12:35 DiskStation kernel: [    0.456027] ACPI: Executed 1 blocks of module-level executable AML code
Dec 30 00:12:35 DiskStation kernel: [    3.639424] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec 30 00:12:35 DiskStation kernel: [    6.153628] e1000e 0000:02:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
Dec 30 00:12:35 DiskStation kernel: [    6.311355] e1000e 0000:03:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
Dec 30 00:12:35 DiskStation kernel: [    6.500812] coretemp coretemp.0: Using relative temperature scale!
Dec 30 00:12:35 DiskStation kernel: [    6.507136] coretemp coretemp.0: Using relative temperature scale!
Dec 30 00:12:35 DiskStation kernel: [   10.556121] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Dec 30 00:12:35 DiskStation kernel: [   10.718486] pineview_synobios: module license 'Synology Inc.' taints kernel.
Dec 30 00:12:35 DiskStation kernel: [   10.725573] Disabling lock debugging due to kernel taint
Dec 30 00:12:35 DiskStation kernel: [   10.731929] 2014-12-29 23:12:26 UTC
Dec 30 00:12:35 DiskStation kernel: [   10.739769] Brand: Synology
Dec 30 00:12:35 DiskStation kernel: [   10.742613] Model: DS-1010+
Dec 30 00:12:35 DiskStation kernel: [   10.745465] set group disks wakeup number to 5, spinup time deno 1
Dec 30 00:12:35 DiskStation kernel: [   11.280519] synobios: unload
Dec 30 00:12:35 DiskStation kernel: [   11.347237] md: invalid raid superblock magic on sda3
Dec 30 00:12:35 DiskStation kernel: [   11.352304] md: sda3 does not have a valid v0.90 superblock, not importing!
Dec 30 00:12:35 DiskStation kernel: [   11.399809] md: invalid raid superblock magic on sdb3
Dec 30 00:12:35 DiskStation kernel: [   11.404872] md: sdb3 does not have a valid v0.90 superblock, not importing!
Dec 30 00:12:35 DiskStation kernel: [   11.456283] md: invalid raid superblock magic on sdc3
Dec 30 00:12:35 DiskStation kernel: [   11.461343] md: sdc3 does not have a valid v0.90 superblock, not importing!
Dec 30 00:12:35 DiskStation kernel: [   11.503525] md: invalid raid superblock magic on sdd3
Dec 30 00:12:35 DiskStation kernel: [   11.508586] md: sdd3 does not have a valid v0.90 superblock, not importing!
Dec 30 00:12:35 DiskStation kernel: [   11.570782] md: invalid raid superblock magic on sde3
Dec 30 00:12:35 DiskStation kernel: [   11.575853] md: sde3 does not have a valid v0.90 superblock, not importing!
Dec 30 00:12:35 DiskStation kernel: [   11.597148] md: sda2 has different UUID to sda1
Dec 30 00:12:35 DiskStation kernel: [   11.604944] md: sdb2 has different UUID to sda1
Dec 30 00:12:35 DiskStation kernel: [   11.612745] md: sdc2 has different UUID to sda1
Dec 30 00:12:35 DiskStation kernel: [   11.620557] md: sdd2 has different UUID to sda1
Dec 30 00:12:35 DiskStation kernel: [   11.628371] md: sde2 has different UUID to sda1
Dec 30 00:12:35 DiskStation kernel: [   11.638531] Got empty serial number. Generate serial number from product.
Dec 30 00:12:37 DiskStation kernel: [   22.326375] zram: module is from the staging directory, the quality is unknown, you have been warned.
Dec 30 00:12:38 DiskStation kernel: [   22.994238] init: syno-auth-check main process (2770) killed by TERM signal
Dec 30 00:12:41 DiskStation udev: [uPS] add USB UPS(PRODUCT=764/501/1)
Dec 30 00:12:42 DiskStation kernel: [   26.696343] 2014-12-29 23:12:42 UTC
Dec 30 00:12:42 DiskStation kernel: [   26.704185] Brand: Synology
Dec 30 00:12:42 DiskStation kernel: [   26.707042] Model: DS-1010+
Dec 30 00:12:42 DiskStation kernel: [   26.709889] set group disks wakeup number to 5, spinup time deno 1
Dec 30 00:12:42 DiskStation usbhid-ups[5630]: Startup successful
Dec 30 00:12:42 DiskStation root: The UPS is connected. driver=[usbhid-ups]
Dec 30 00:12:42 DiskStation upsd[5646]: not listening on ::1 port 3493
Dec 30 00:12:42 DiskStation upsd[5647]: Startup successful
Dec 30 00:12:42 DiskStation upsd[5647]: upsd.c:733 IP [127.0.0.1] add to ACL list
Dec 30 00:12:42 DiskStation upsd[5647]: upsd.c:737 IP [::1] add to ACL list
Dec 30 00:12:42 DiskStation upsd[5647]: upsd.c:798 IP [XXX.XXX.XXX.XXX] add to ACL list
Dec 30 00:12:43 DiskStation interface-catcher: eth0 (inet XXX.XXX.XXX.XXX netmask 255.255.255.0 mtu 1500) is added
Dec 30 00:12:43 DiskStation interface-catcher: eth1 (dhcp) is added
Dec 30 00:12:43 DiskStation interface-catcher: lo (inet 127.0.0.1 netmask 255.0.0.0 ) is added
Dec 30 00:12:43 DiskStation upsmon[6162]: Startup successful
Dec 30 00:12:43 DiskStation root: /usr/syno/bin/ups.sh start invoked.
Dec 30 00:12:43 DiskStation upsmon[6164]: UPS [ups@localhost] connected
Dec 30 00:12:43 DiskStation dhcp-client: started on eth1
Dec 30 00:12:43 DiskStation dhcpcd[6187]: terminating on signal 15
Dec 30 00:12:43 DiskStation kernel: [   28.472067] init: dhcp-client (eth1) main process (6187) terminated with status 15
Dec 30 00:12:43 DiskStation dhcp-client: stopped on eth1
Dec 30 00:12:43 DiskStation dhcp-client: started on eth1
Dec 30 00:12:44 DiskStation synonetd: service_ddns_daemon_action.c:44 failed to hup /var/run/heartbeatd.pid
Dec 30 00:12:44 DiskStation synonetd: service_ddns_daemon_action.c(57) : Failed to do action 4 on DDNS daemon, return value=-1
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2641 [info] Activate all VG
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2675 space: [/dev/md6]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2703 space: [/dev/md6], ndisk: [1]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2675 space: [/dev/md5]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2703 space: [/dev/md5], ndisk: [1]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2675 space: [/dev/md3]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2703 space: [/dev/md3], ndisk: [1]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2675 space: [/dev/md2]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2703 space: [/dev/md2], ndisk: [1]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2675 space: [/dev/md4]
Dec 30 00:12:46 DiskStation spacetool.shared: spacetool.c:2703 space: [/dev/md4], ndisk: [1]
Dec 30 00:12:47 DiskStation synovspace: virtual_space_conf_check.c:78 [iNFO] "PASS" checking configuration of virtual space [FCACHE], app: [1]
Dec 30 00:12:47 DiskStation synovspace: virtual_space_conf_check.c:74 [iNFO] No implementation, skip checking configuration of virtual space [HA]
Dec 30 00:12:47 DiskStation synovspace: virtual_space_conf_check.c:74 [iNFO] No implementation, skip checking configuration of virtual space [sNAPSHOT_ORG]
Dec 30 00:12:47 DiskStation synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume5] / [/dev/md6]
Dec 30 00:12:47 DiskStation synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume4] / [/dev/md5]
Dec 30 00:12:47 DiskStation synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume3] / [/dev/md4]
Dec 30 00:12:47 DiskStation synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume2] / [/dev/md3]
Dec 30 00:12:47 DiskStation synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume1] / [/dev/md2]
Dec 30 00:12:48 DiskStation root: /usr/syno/bin/ups.sh restart invoked.
Dec 30 00:12:48 DiskStation upsd[5647]: mainloop: Interrupted system call
Dec 30 00:12:52 DiskStation usbhid-ups[8534]: Startup successful
Dec 30 00:12:52 DiskStation root: The UPS is connected. driver=[]
Dec 30 00:12:53 DiskStation synocheckhotspare: synocheckhotspare.c:149 [iNFO] No hotspare config, skip hotspare config check. [0x2000 virtual_space_layer_get.c:98]
Dec 30 00:12:53 DiskStation synostoraged: synostoraged.c:34 [info] synostoraged sleep time is [5]
Dec 30 00:12:53 DiskStation upsd[8856]: Startup successful
Dec 30 00:12:53 DiskStation upsd[8856]: upsd.c:733 IP [127.0.0.1] add to ACL list
Dec 30 00:12:53 DiskStation upsd[8856]: upsd.c:737 IP [::1] add to ACL list
Dec 30 00:12:53 DiskStation upsd[8856]: upsd.c:798 IP [XXX.XXX.XXX.XXX] add to ACL list
Dec 30 00:12:53 DiskStation syno_hdd_util: Model:[HD154UI], Firmware:[1AG01118], S/N:[XXX] in [/dev/sde] is not ssd
Dec 30 00:12:53 DiskStation syno_hdd_util: Model:[WD20EARX-00PASB0], Firmware:[51.0AB51], S/N:[XXX] in [/dev/sdd] is not ssd
Dec 30 00:12:54 DiskStation syno_hdd_util: Model:[HD204UI], Firmware:[1AQ10001], S/N:[XXX] in [/dev/sdc] is not ssd
Dec 30 00:12:54 DiskStation syno_hdd_util: Model:[HD204UI], Firmware:[1AQ10001], S/N:[XXX] in [/dev/sdb] is not ssd
Dec 30 00:12:54 DiskStation upsmon[9473]: Startup successful
Dec 30 00:12:54 DiskStation upsmon[9476]: UPS [ups@localhost] connected
Dec 30 00:12:54 DiskStation syno_hdd_util: Model:[HD154UI], Firmware:[1AG01118], S/N:[XXX] in [/dev/sda] is not ssd
Dec 30 00:12:54 DiskStation kernel: [   39.404941] sd 8:0:0:0: [synoboot] Asking for cache data failed
Dec 30 00:12:54 DiskStation kernel: [   39.410921] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
Dec 30 00:12:54 DiskStation kernel: [   39.419889] sd 8:0:0:0: [synoboot] Asking for cache data failed
Dec 30 00:12:54 DiskStation kernel: [   39.425901] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
Dec 30 00:12:54 DiskStation kernel: [   39.527861] sd 8:0:0:0: [synoboot] Asking for cache data failed
Dec 30 00:12:54 DiskStation kernel: [   39.533842] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
Dec 30 00:12:57 DiskStation synousbdisk: RCClean succeeded
Dec 30 00:12:57 DiskStation synosata: synosata.c:71 no external sata devices granted
Dec 30 00:12:58 DiskStation synosharesnap: synosharesnap.c:546 Start synosharesnap boot-check...
Dec 30 00:12:58 DiskStation synosharesnap: synosharesnap.c:562 End synosharesnap boot-check...
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1170 ##### ACTION:add
Dec 30 00:12:59 DiskStation hotplugd: DEVNAME:sda
Dec 30 00:12:59 DiskStation hotplugd: DEVGUID:XXX
Dec 30 00:12:59 DiskStation hotplugd: DEVPATH:sda
Dec 30 00:12:59 DiskStation hotplugd: SUBSYSTEM:block
Dec 30 00:12:59 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1236 ==== SATA disk [sda] hotswap [add] ====
Dec 30 00:12:59 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sda 1>/dev/null 2>&1
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1255 ==== SATA disk [sda] Model: [HD154UI                 ] ====
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1256 ==== SATA disk [sda] Serial number: [XXX] ====
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1257 ==== SATA disk [sda] Firmware version: [1AG01118] ====
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1170 ##### ACTION:add
Dec 30 00:12:59 DiskStation hotplugd: DEVNAME:sdb
Dec 30 00:12:59 DiskStation hotplugd: DEVGUID:XXX
Dec 30 00:12:59 DiskStation hotplugd: DEVPATH:sdb
Dec 30 00:12:59 DiskStation hotplugd: SUBSYSTEM:block
Dec 30 00:12:59 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
Dec 30 00:12:59 DiskStation hotplugd: hotplugd.c:1236 ==== SATA disk [sdb] hotswap [add] ====
Dec 30 00:13:00 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sdb 1>/dev/null 2>&1
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1255 ==== SATA disk [sdb] Model: [HD204UI                 ] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1256 ==== SATA disk [sdb] Serial number: [XXX] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1257 ==== SATA disk [sdb] Firmware version: [1AQ10001] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1170 ##### ACTION:add
Dec 30 00:13:00 DiskStation hotplugd: DEVNAME:sdc
Dec 30 00:13:00 DiskStation hotplugd: DEVGUID:XXX
Dec 30 00:13:00 DiskStation hotplugd: DEVPATH:sdc
Dec 30 00:13:00 DiskStation hotplugd: SUBSYSTEM:block
Dec 30 00:13:00 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1236 ==== SATA disk [sdc] hotswap [add] ====
Dec 30 00:13:00 DiskStation kernel: [   45.001705] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Dec 30 00:13:00 DiskStation sm-notify[10536]: Failed to open directory sm.bak: No such file or directory
Dec 30 00:13:00 DiskStation statd[10535]: Running as root.  chown /var/lib/nfs to choose different user
Dec 30 00:13:00 DiskStation kernel: [   45.215481] netlink: 12 bytes leftover after parsing attributes.
Dec 30 00:13:00 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sdc 1>/dev/null 2>&1
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1255 ==== SATA disk [sdc] Model: [HD204UI                 ] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1256 ==== SATA disk [sdc] Serial number: [XXX] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1257 ==== SATA disk [sdc] Firmware version: [1AQ10001] ====
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1170 ##### ACTION:add
Dec 30 00:13:00 DiskStation hotplugd: DEVNAME:sdd
Dec 30 00:13:00 DiskStation hotplugd: DEVGUID:XXX
Dec 30 00:13:00 DiskStation hotplugd: DEVPATH:sdd
Dec 30 00:13:00 DiskStation hotplugd: SUBSYSTEM:block
Dec 30 00:13:00 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0
Dec 30 00:13:00 DiskStation hotplugd: hotplugd.c:1236 ==== SATA disk [sdd] hotswap [add] ====
Dec 30 00:13:01 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sdd 1>/dev/null 2>&1
Dec 30 00:13:01 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/syno_disk_ctl --wcache-off  /dev/sdd 1>/dev/null 2>&1
Dec 30 00:13:01 DiskStation hotplugd: [/usr/syno/bin/syno_disk_ctl --wcache-off  /dev/sdd 1>/dev/null 2>&1], error (255)
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1255 ==== SATA disk [sdd] Model: [WD20EARX-00PASB0        ] ====
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1256 ==== SATA disk [sdd] Serial number: [XXX] ====
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1257 ==== SATA disk [sdd] Firmware version: [51.0AB51] ====
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1170 ##### ACTION:add
Dec 30 00:13:01 DiskStation hotplugd: DEVNAME:sde
Dec 30 00:13:01 DiskStation hotplugd: DEVGUID:XXX
Dec 30 00:13:01 DiskStation hotplugd: DEVPATH:sde
Dec 30 00:13:01 DiskStation hotplugd: SUBSYSTEM:block
Dec 30 00:13:01 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1236 ==== SATA disk [sde] hotswap [add] ====
Dec 30 00:13:01 DiskStation hotplugd: disk/disk_config_single.c:154 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sde 1>/dev/null 2>&1
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1255 ==== SATA disk [sde] Model: [HD154UI                 ] ====
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1256 ==== SATA disk [sde] Serial number: [XXX] ====
Dec 30 00:13:01 DiskStation hotplugd: hotplugd.c:1257 ==== SATA disk [sde] Firmware version: [1AG01118] ====
Dec 30 00:13:01 DiskStation heartbeatd: heartbeatd.c:147 Heartbeat is not enabled, skip starting
Dec 30 00:13:03 DiskStation kernel: [   47.901273] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
Dec 30 00:13:03 DiskStation kernel: [   47.923396] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\Seriale. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
Dec 30 00:13:03 DiskStation kernel: [   48.122145] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\Filmy. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
Dec 30 00:13:03 DiskStation kernel: [   48.277908] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\FilmyHD. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
Dec 30 00:13:08 DiskStation S99zbootok.sh: all service finish boot up.
Dec 30 00:13:09 DiskStation ddnsd: ddnsd.c:3485 DDNS Expired. UpdateAll.
Dec 30 00:13:19 DiskStation root: == DSM finished boot up ==
Dec 30 00:13:23 DiskStation ddnsd: ddnsd.c:2568 Success to update [XXX] with IP [XXX.XXX.XXX.XXX] at [NoIP.com]
Dec 30 00:14:24 DiskStation upnpd: (upnpclient.c:1735) clean up finished
Dec 30 00:14:24 DiskStation upnpd: (upnpd.c:158) init UPnP faild
Dec 30 00:14:47 DiskStation geticon.cgi: pkgimagetool.cpp:85 Failed to mkdir /volume5/@tmp/pkglist.tmp/icon/AVAIL/SYNO/MediaServer/1.3-2575, File exists
Dec 30 00:14:58 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:416 http://synopkg.superzebulon.org/spkrepo/packages, Failed to request packages, httpResponseCode=404
Dec 30 00:14:59 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13854]: pkgcurltool.cpp:416 http://synopkg.superzebulon.org/spkrepo/packages, Failed to request packages, httpResponseCode=404
Dec 30 00:15:02 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13138]: pkgcurltool.cpp:416 http://synopkg.superzebulon.org/spkrepo/packages, Failed to request packages, httpResponseCode=404
Dec 30 00:15:09 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:259 Failed to curl perform, code=52, err=Error
Dec 30 00:15:09 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:395 Failed to download http://synopkg.superzebulon.org/spkrepo/packages, code=52, err=Error
Dec 30 00:15:10 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13854]: pkgcurltool.cpp:259 Failed to curl perform, code=52, err=Error
Dec 30 00:15:10 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13854]: pkgcurltool.cpp:395 Failed to download http://synopkg.superzebulon.org/spkrepo/packages, code=52, err=Error
Dec 30 00:15:13 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13138]: pkgcurltool.cpp:259 Failed to curl perform, code=52, err=Error
Dec 30 00:15:13 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13138]: pkgcurltool.cpp:395 Failed to download http://synopkg.superzebulon.org/spkrepo/packages, code=52, err=Error
Dec 30 00:15:37 DiskStation codesign.php: keyinfo-user format error
Dec 30 00:15:37 DiskStation codesign.php: DeleteOtherKeyServer failed.
Dec 30 00:15:54 DiskStation upnpd: (upnpclient.c:1735) clean up finished
Dec 30 00:15:54 DiskStation upnpd: (upnpd.c:158) init UPnP faild
Dec 30 00:17:20 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:259 Failed to curl perform, code=7, err=Error
Dec 30 00:17:20 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:395 Failed to download http://subtitlessh.no-ip.biz/repo_spk/, code=7, err=Error
Dec 30 00:17:24 DiskStation upnpd: (upnpclient.c:1735) clean up finished
Dec 30 00:17:24 DiskStation upnpd: (upnpd.c:158) init UPnP faild
Dec 30 00:17:25 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13854]: pkgcurltool.cpp:259 Failed to curl perform, code=7, err=Error
Dec 30 00:17:25 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13854]: pkgcurltool.cpp:395 Failed to download http://subtitlessh.no-ip.biz/repo_spk/, code=7, err=Error
Dec 30 00:17:28 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13138]: pkgcurltool.cpp:259 Failed to curl perform, code=7, err=Error
Dec 30 00:17:28 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[13138]: pkgcurltool.cpp:395 Failed to download http://subtitlessh.no-ip.biz/repo_spk/, code=7, err=Error

 

1/2

Link to comment
Share on other sites

2/2

 

Dmesg:

[ 00:12:14 ] Linux version 3.2.40 (root@build7) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #5021 SMP Wed Dec 17 18:30:16 CST 
[ 00:12:14 ] Command line: root=/dev/md0 ihd_num=0 netif_num=2 syno_hw_version=DS1010+  mac1=XXXXXXXXXXXX mac2=XXXXXXXXXXXX sn=XXXXXXXXXX 
[ 00:12:14 ] KERNEL supported cpus:
[ 00:12:14 ]   Intel GenuineIntel
[ 00:12:14 ] BIOS-provided physical RAM map:
[ 00:12:14 ]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 00:12:14 ]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 00:12:14 ]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 00:12:14 ]  BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 00:12:14 ]  BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[ 00:12:14 ]  BIOS-e820: 000000003f69e000 - 000000003f6e0000 (ACPI NVS)
[ 00:12:14 ]  BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved)
[ 00:12:14 ]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 00:12:14 ]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 00:12:14 ] NX (Execute Disable) protection: active
[ 00:12:14 ] SMBIOS 2.6 present.
[ 00:12:14 ] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016  04/16/2010
[ 00:12:14 ] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 00:12:14 ] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 00:12:14 ] last_pfn = 0x3f690 max_arch_pfn = 0x400000000
[ 00:12:14 ] MTRR default type: uncachable
[ 00:12:14 ] MTRR fixed ranges enabled:
[ 00:12:14 ]   00000-9FFFF write-back
[ 00:12:14 ]   A0000-BFFFF uncachable
[ 00:12:14 ]   C0000-CFFFF write-protect
[ 00:12:14 ]   D0000-DFFFF uncachable
[ 00:12:14 ]   E0000-EFFFF write-through
[ 00:12:14 ]   F0000-FFFFF write-protect
[ 00:12:14 ] MTRR variable ranges enabled:
[ 00:12:14 ]   0 base 000000000 mask FC0000000 write-back
[ 00:12:14 ]   1 base 03F700000 mask FFFF00000 uncachable
[ 00:12:14 ]   2 base 03F800000 mask FFF800000 uncachable
[ 00:12:14 ]   3 disabled
[ 00:12:14 ]   4 disabled
[ 00:12:14 ]   5 disabled
[ 00:12:14 ]   6 disabled
[ 00:12:14 ]   7 disabled
[ 00:12:14 ] found SMP MP-table at [ffff8800000ff780] ff780
[ 00:12:14 ] initial memory mapped : 0 - 20000000
[ 00:12:14 ] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 00:12:14 ] init_memory_mapping: 0000000000000000-000000003f690000
[ 00:12:14 ]  0000000000 - 003f600000 page 2M
[ 00:12:14 ]  003f600000 - 003f690000 page 4k
[ 00:12:14 ] kernel direct mapping tables up to 3f690000 @ 1fffd000-20000000
[ 00:12:14 ] RAMDISK: 3f1d8000 - 3f680000
[ 00:12:14 ] ACPI: RSDP 00000000000f9db0 00014 (v00 ACPIAM)
[ 00:12:14 ] ACPI: RSDT 000000003f690000 0003C (v01 041610 RSDT1824 20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: FACP 000000003f690200 00084 (v01 041610 FACP1824 20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: DSDT 000000003f690440 06848 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
[ 00:12:14 ] ACPI: FACS 000000003f69e000 00040
[ 00:12:14 ] ACPI: APIC 000000003f690390 0006C (v01 041610 APIC1824 20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: MCFG 000000003f690400 0003C (v01 041610 OEMMCFG  20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: OEMB 000000003f69e040 00072 (v01 041610 OEMB1824 20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: HPET 000000003f69a440 00038 (v01 041610 OEMHPET  20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: GSCI 000000003f69e0c0 02024 (v01 041610 GMCHSCI  20100416 MSFT 00000097)
[ 00:12:14 ] ACPI: Local APIC address 0xfee00000
[ 00:12:14 ]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003d800000-ffff88003e5fffff] on node 0
[ 00:12:14 ] Zone PFN ranges:
[ 00:12:14 ]   DMA      0x00000010 -> 0x00001000
[ 00:12:14 ]   DMA32    0x00001000 -> 0x00100000
[ 00:12:14 ]   Normal   empty
[ 00:12:14 ] Movable zone start PFN for each node
[ 00:12:14 ] early_node_map[2] active PFN ranges
[ 00:12:14 ]     0: 0x00000010 -> 0x0000009f
[ 00:12:14 ]     0: 0x00000100 -> 0x0003f690
[ 00:12:14 ] On node 0 totalpages: 259615
[ 00:12:14 ]   DMA zone: 56 pages used for memmap
[ 00:12:14 ]   DMA zone: 5 pages reserved
[ 00:12:14 ]   DMA zone: 3922 pages, LIFO batch:0
[ 00:12:14 ]   DMA32 zone: 3495 pages used for memmap
[ 00:12:14 ]   DMA32 zone: 252137 pages, LIFO batch:31
[ 00:12:14 ] ACPI: PM-Timer IO Port: 0x808
[ 00:12:14 ] ACPI: Local APIC address 0xfee00000
[ 00:12:14 ] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 00:12:14 ] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 00:12:14 ] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 00:12:14 ] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 00:12:14 ] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 00:12:14 ] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 00:12:14 ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 00:12:14 ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 00:12:14 ] ACPI: IRQ0 used by override.
[ 00:12:14 ] ACPI: IRQ2 used by override.
[ 00:12:14 ] ACPI: IRQ9 used by override.
[ 00:12:14 ] Using ACPI (MADT) for SMP configuration information
[ 00:12:14 ] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 00:12:14 ] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 00:12:14 ] nr_irqs_gsi: 40
[ 00:12:14 ] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 00:12:14 ] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 00:12:14 ] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 00:12:14 ] Allocating PCI resources starting at 3f700000 (gap: 3f700000:bf700000)
[ 00:12:14 ] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 00:12:14 ] PERCPU: Embedded 25 pages/cpu @ffff88003ee00000 s70528 r8192 d23680 u524288
[ 00:12:14 ] pcpu-alloc: s70528 r8192 d23680 u524288 alloc=1*2097152
[ 00:12:14 ] pcpu-alloc: [0] 0 1 2 3 
[ 00:12:14 ] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256059
[ 00:12:14 ] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=2 syno_hw_version=DS1010+  mac1=XXXXXXXXXXXX mac2=XXXXXXXXXXXX sn=XXXXXXXXXX 
[ 00:12:14 ] Internal HD num: 0
[ 00:12:14 ] Internal netif num: 2
[ 00:12:14 ] Synology Hardware Version: DS1010+-j
[ 00:12:14 ] Mac1: XXXXXXXXXXXX
[ 00:12:14 ] Mac2: XXXXXXXXXXXX
[ 00:12:14 ] Serial Number: XXXXXXXXXX
[ 00:12:14 ] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 00:12:14 ] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 00:12:14 ] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 00:12:14 ] Memory: 1007728k/1038912k available (4217k kernel code, 452k absent, 30732k reserved, 4284k data, 436k init)
[ 00:12:14 ] Hierarchical RCU implementation.
[ 00:12:14 ] 	CONFIG_RCU_FANOUT set to non-default value of 32
[ 00:12:14 ] 	RCU dyntick-idle grace-period acceleration is enabled.
[ 00:12:14 ] NR_IRQS:4352 nr_irqs:712 16
[ 00:12:14 ] Console: colour dummy device 80x25
[ 00:12:14 ] console [ttyS0] enabled
[ 00:12:14 ] hpet clockevent registered
[ 00:12:14 ] Fast TSC calibration using PIT
[ 00:12:14 ] Detected 1662.490 MHz processor.
[ 00:12:14 ] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.98 BogoMIPS (lpj=1662490)
[ 00:12:14 ] pid_max: default: 32768 minimum: 301
[ 00:12:14 ] Security Framework initialized
[ 00:12:14 ] AppArmor: AppArmor initialized
[ 00:12:14 ] Mount-cache hash table entries: 256
[ 00:12:14 ] CPU: Physical Processor ID: 0
[ 00:12:14 ] CPU: Processor Core ID: 0
[ 00:12:14 ] mce: CPU supports 5 MCE banks
[ 00:12:14 ] CPU0: Thermal monitoring enabled (TM1)
[ 00:12:14 ] using mwait in idle threads.
[ 00:12:14 ] ACPI: Core revision 20110623
[ 00:12:14 ] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 00:12:14 ] CPU0: Intel(R) Atom(TM) CPU K510   @ 1.66GHz stepping 0a
[ 00:12:14 ] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
[ 00:12:14 ] APIC delta adjusted to PM-Timer: 1038933 (1246706)
[ 00:12:14 ] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 00:12:14 ] ... version:                3
[ 00:12:14 ] ... bit width:              40
[ 00:12:14 ] ... generic registers:      2
[ 00:12:14 ] ... value mask:             000000ffffffffff
[ 00:12:14 ] ... max period:             000000007fffffff
[ 00:12:14 ] ... fixed-purpose events:   3
[ 00:12:14 ] ... event mask:             0000000700000003
[ 00:12:14 ] NMI watchdog enabled, takes one hw-pmu counter.
[ 00:12:14 ] Booting Node   0, Processors  #1
[ 00:12:14 ] smpboot cpu 1: start_ip = 9a000
[ 00:12:14 ] Disabled fast string operations
[ 00:12:14 ] TSC synchronization [CPU#0 -> CPU#1]:
[ 00:12:14 ] Measured 50 cycles TSC warp between CPUs, turning off TSC clock.
[ 00:12:14 ] Marking TSC unstable due to check_tsc_sync_source failed
[ 00:12:14 ] NMI watchdog enabled, takes one hw-pmu counter.
[ 00:12:14 ]  #2
[ 00:12:14 ] smpboot cpu 2: start_ip = 9a000
[ 00:12:14 ] Disabled fast string operations
[ 00:12:14 ] NMI watchdog enabled, takes one hw-pmu counter.
[ 00:12:14 ]  #3 Ok.
[ 00:12:14 ] smpboot cpu 3: start_ip = 9a000
[ 00:12:14 ] Disabled fast string operations
[ 00:12:14 ] NMI watchdog enabled, takes one hw-pmu counter.
[ 00:12:14 ] Brought up 4 CPUs
[ 00:12:14 ] Total of 4 processors activated (13298.63 BogoMIPS).
[ 00:12:14 ] devtmpfs: initialized
[ 00:12:14 ] PM: Registering ACPI NVS region at 3f69e000 (270336 bytes)
[ 00:12:14 ] xor: automatically using best checksumming function: generic_sse
[ 00:12:14 ]    generic_sse:  5064.000 MB/sec
[ 00:12:14 ] xor: using function: generic_sse (5064.000 MB/sec)
[ 00:12:14 ] NET: Registered protocol family 16
[ 00:12:14 ] ACPI: bus type pci registered
[ 00:12:14 ] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 00:12:14 ] PCI: not using MMCONFIG
[ 00:12:14 ] PCI: Using configuration type 1 for base access
[ 00:12:14 ] bio: create slab  at 0
[ 00:12:14 ] raid6: int64x1    347 MB/s
[ 00:12:14 ] raid6: int64x2    550 MB/s
[ 00:12:14 ] raid6: int64x4    597 MB/s
[ 00:12:14 ] raid6: int64x8    683 MB/s
[ 00:12:14 ] raid6: sse2x1     613 MB/s
[ 00:12:14 ] raid6: sse2x2    1109 MB/s
[ 00:12:14 ] raid6: sse2x4    1937 MB/s
[ 00:12:14 ] raid6: using algorithm sse2x4 (1937 MB/s)
[ 00:12:14 ] ACPI: Added _OSI(Module Device)
[ 00:12:14 ] ACPI: Added _OSI(Processor Device)
[ 00:12:14 ] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 00:12:14 ] ACPI: Added _OSI(Processor Aggregator Device)
[ 00:12:14 ] ACPI: EC: Look up EC in DSDT
[ 00:12:14 ] ACPI: Executed 1 blocks of module-level executable AML code
[ 00:12:14 ] ACPI: Interpreter enabled
[ 00:12:14 ] ACPI: (supports S0 S4 S5)
[ 00:12:14 ] ACPI: Using IOAPIC for interrupt routing
[ 00:12:14 ] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 00:12:14 ] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 00:12:14 ] ACPI: No dock devices found.
[ 00:12:14 ] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 00:12:14 ] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xdfffffff]
[ 00:12:14 ] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 00:12:14 ] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
[ 00:12:14 ] pci 0000:00:02.0: [8086:a001] type 0 class 0x000300
[ 00:12:14 ] pci 0000:00:02.0: reg 10: [mem 0xfe880000-0xfe8fffff]
[ 00:12:14 ] pci 0000:00:02.0: reg 14: [io  0xbc00-0xbc07]
[ 00:12:14 ] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 00:12:14 ] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[ 00:12:14 ] pci 0000:00:02.1: [8086:a002] type 0 class 0x000380
[ 00:12:14 ] pci 0000:00:02.1: reg 10: [mem 0xfe680000-0xfe6fffff]
[ 00:12:14 ] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1a.0: reg 20: [io  0xb880-0xb89f]
[ 00:12:14 ] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1a.1: reg 20: [io  0xb800-0xb81f]
[ 00:12:14 ] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1a.2: reg 20: [io  0xb480-0xb49f]
[ 00:12:14 ] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1a.7: reg 10: [mem 0xfe87bc00-0xfe87bfff]
[ 00:12:14 ] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:00:1a.7: PME# disabled
[ 00:12:14 ] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 00:12:14 ] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:00:1c.0: PME# disabled
[ 00:12:14 ] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 00:12:14 ] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:00:1c.4: PME# disabled
[ 00:12:14 ] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 00:12:14 ] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:00:1c.5: PME# disabled
[ 00:12:14 ] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1d.0: reg 20: [io  0xb400-0xb41f]
[ 00:12:14 ] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1d.1: reg 20: [io  0xb080-0xb09f]
[ 00:12:14 ] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1d.2: reg 20: [io  0xb000-0xb01f]
[ 00:12:14 ] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 00:12:14 ] pci 0000:00:1d.7: reg 10: [mem 0xfe87b800-0xfe87bbff]
[ 00:12:14 ] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:00:1d.7: PME# disabled
[ 00:12:14 ] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 00:12:14 ] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 00:12:14 ] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 00:12:14 ] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 00:12:14 ] pci 0000:00:1f.2: reg 10: [io  0xac00-0xac07]
[ 00:12:14 ] pci 0000:00:1f.2: reg 14: [io  0xa880-0xa883]
[ 00:12:14 ] pci 0000:00:1f.2: reg 18: [io  0xa800-0xa807]
[ 00:12:14 ] pci 0000:00:1f.2: reg 1c: [io  0xa480-0xa483]
[ 00:12:14 ] pci 0000:00:1f.2: reg 20: [io  0xa400-0xa41f]
[ 00:12:14 ] pci 0000:00:1f.2: reg 24: [mem 0xfe87b000-0xfe87b7ff]
[ 00:12:14 ] pci 0000:00:1f.2: PME# supported from D3hot
[ 00:12:14 ] pci 0000:00:1f.2: PME# disabled
[ 00:12:14 ] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 00:12:14 ] pci 0000:00:1f.3: reg 10: [mem 0xfe87ac00-0xfe87acff 64bit]
[ 00:12:14 ] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[ 00:12:14 ] pci 0000:01:00.0: [1095:3132] type 0 class 0x000180
[ 00:12:14 ] pci 0000:01:00.0: reg 10: [mem 0xfe9ffc00-0xfe9ffc7f 64bit]
[ 00:12:14 ] pci 0000:01:00.0: reg 18: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 00:12:14 ] pci 0000:01:00.0: reg 20: [io  0xcc00-0xcc7f]
[ 00:12:14 ] pci 0000:01:00.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
[ 00:12:14 ] pci 0000:01:00.0: supports D1 D2
[ 00:12:14 ] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[ 00:12:14 ] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 00:12:14 ] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[ 00:12:14 ] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[ 00:12:14 ] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200
[ 00:12:14 ] pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
[ 00:12:14 ] pci 0000:02:00.0: reg 18: [io  0xdc00-0xdc1f]
[ 00:12:14 ] pci 0000:02:00.0: reg 1c: [mem 0xfeadc000-0xfeadffff]
[ 00:12:14 ] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:02:00.0: PME# disabled
[ 00:12:14 ] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 00:12:14 ] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[ 00:12:14 ] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[ 00:12:14 ] pci 0000:03:00.0: [8086:10d3] type 0 class 0x000200
[ 00:12:14 ] pci 0000:03:00.0: reg 10: [mem 0xfebe0000-0xfebfffff]
[ 00:12:14 ] pci 0000:03:00.0: reg 18: [io  0xec00-0xec1f]
[ 00:12:14 ] pci 0000:03:00.0: reg 1c: [mem 0xfebdc000-0xfebdffff]
[ 00:12:14 ] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 00:12:14 ] pci 0000:03:00.0: PME# disabled
[ 00:12:14 ] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 00:12:14 ] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[ 00:12:14 ] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[ 00:12:14 ] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [mem 0x3f700000-0xdfffffff] (subtractive decode)
[ 00:12:14 ] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 00:12:14 ] pci_bus 0000:00: on NUMA node 0
[ 00:12:14 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 00:12:14 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 00:12:14 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 00:12:14 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 00:12:14 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 00:12:14 ]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 00:12:14 ]  pci0000:00: ACPI _OSC control (0x1d) granted
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 00:12:14 ] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 00:12:14 ] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 00:12:14 ] vgaarb: loaded
[ 00:12:14 ] vgaarb: bridge control possible 0000:00:02.0
[ 00:12:14 ] SCSI subsystem initialized
[ 00:12:14 ] libata version 3.00 loaded.
[ 00:12:14 ] PCI: Using ACPI for IRQ routing
[ 00:12:14 ] PCI: pci_cache_line_size set to 64 bytes
[ 00:12:14 ] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[ 00:12:14 ] reserve RAM buffer: 000000003f690000 - 000000003fffffff 
[ 00:12:14 ] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 00:12:14 ] Switching to clocksource hpet
[ 00:12:14 ] AppArmor: AppArmor Filesystem Enabled
[ 00:12:14 ] pnp: PnP ACPI init
[ 00:12:14 ] ACPI: bus type pnp registered
[ 00:12:14 ] pnp 00:00: [bus 00-ff]
[ 00:12:14 ] pnp 00:00: [io  0x0cf8-0x0cff]
[ 00:12:14 ] pnp 00:00: [io  0x0000-0x0cf7 window]
[ 00:12:14 ] pnp 00:00: [io  0x0d00-0xffff window]
[ 00:12:14 ] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 00:12:14 ] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 00:12:14 ] pnp 00:00: [mem 0x3f700000-0xdfffffff window]
[ 00:12:14 ] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[ 00:12:14 ] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 00:12:14 ] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 00:12:14 ] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 00:12:14 ] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 00:12:14 ] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 00:12:14 ] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 00:12:14 ] pnp 00:02: [dma 4]
[ 00:12:14 ] pnp 00:02: [io  0x0000-0x000f]
[ 00:12:14 ] pnp 00:02: [io  0x0081-0x0083]
[ 00:12:14 ] pnp 00:02: [io  0x0087]
[ 00:12:14 ] pnp 00:02: [io  0x0089-0x008b]
[ 00:12:14 ] pnp 00:02: [io  0x008f]
[ 00:12:14 ] pnp 00:02: [io  0x00c0-0x00df]
[ 00:12:14 ] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 00:12:14 ] pnp 00:03: [io  0x0070-0x0071]
[ 00:12:14 ] pnp 00:03: [irq 8]
[ 00:12:14 ] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 00:12:14 ] pnp 00:04: [io  0x0061]
[ 00:12:14 ] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 00:12:14 ] pnp 00:05: [io  0x00f0-0x00ff]
[ 00:12:14 ] pnp 00:05: [irq 13]
[ 00:12:14 ] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 00:12:14 ] pnp 00:06: [io  0x03f8-0x03ff]
[ 00:12:14 ] pnp 00:06: [irq 4]
[ 00:12:14 ] pnp 00:06: [dma 0 disabled]
[ 00:12:14 ] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 00:12:14 ] pnp 00:07: [io  0x02f8-0x02ff]
[ 00:12:14 ] pnp 00:07: [irq 3]
[ 00:12:14 ] pnp 00:07: [dma 0 disabled]
[ 00:12:14 ] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 00:12:14 ] pnp 00:08: [io  0x0378-0x037f]
[ 00:12:14 ] pnp 00:08: [irq 7]
[ 00:12:14 ] pnp 00:08: [dma 0 disabled]
[ 00:12:14 ] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 00:12:14 ] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[ 00:12:14 ] pnp 00:09: [io  0x0a00-0x0a0f]
[ 00:12:14 ] pnp 00:09: [io  0x0a10-0x0a1f]
[ 00:12:14 ] pnp 00:09: [io  0x0a20-0x0a2f]
[ 00:12:14 ] pnp 00:09: [io  0x0a30-0x0a3f]
[ 00:12:14 ] system 00:09: [io  0x0a00-0x0a0f] has been reserved
[ 00:12:14 ] system 00:09: [io  0x0a10-0x0a1f] has been reserved
[ 00:12:14 ] system 00:09: [io  0x0a20-0x0a2f] has been reserved
[ 00:12:14 ] system 00:09: [io  0x0a30-0x0a3f] has been reserved
[ 00:12:14 ] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 00:12:14 ] pnp 00:0a: [io  0x0010-0x001f]
[ 00:12:14 ] pnp 00:0a: [io  0x0022-0x003f]
[ 00:12:14 ] pnp 00:0a: [io  0x0044-0x005f]
[ 00:12:14 ] pnp 00:0a: [io  0x0062-0x0063]
[ 00:12:14 ] pnp 00:0a: [io  0x0065-0x006f]
[ 00:12:14 ] pnp 00:0a: [io  0x0072-0x007f]
[ 00:12:14 ] pnp 00:0a: [io  0x0080]
[ 00:12:14 ] pnp 00:0a: [io  0x0084-0x0086]
[ 00:12:14 ] pnp 00:0a: [io  0x0088]
[ 00:12:14 ] pnp 00:0a: [io  0x008c-0x008e]
[ 00:12:14 ] pnp 00:0a: [io  0x0090-0x009f]
[ 00:12:14 ] pnp 00:0a: [io  0x00a2-0x00bf]
[ 00:12:14 ] pnp 00:0a: [io  0x00e0-0x00ef]
[ 00:12:14 ] pnp 00:0a: [io  0x04d0-0x04d1]
[ 00:12:14 ] pnp 00:0a: [io  0x0800-0x087f]
[ 00:12:14 ] pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
[ 00:12:14 ] pnp 00:0a: [io  0x0480-0x04ff]
[ 00:12:14 ] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 00:12:14 ] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 00:12:14 ] pnp 00:0a: [mem 0xfed40000-0xfed8ffff]
[ 00:12:14 ] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[ 00:12:14 ] system 00:0a: [io  0x0800-0x087f] has been reserved
[ 00:12:14 ] system 00:0a: [io  0x0480-0x04ff] could not be reserved
[ 00:12:14 ] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 00:12:14 ] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 00:12:14 ] system 00:0a: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 00:12:14 ] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 00:12:14 ] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 00:12:14 ] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 00:12:14 ] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[ 00:12:14 ] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 00:12:14 ] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 00:12:14 ] pnp 00:0d: [mem 0xffc00000-0xffefffff]
[ 00:12:14 ] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
[ 00:12:14 ] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 00:12:14 ] pnp 00:0e: [io  0x0060]
[ 00:12:14 ] pnp 00:0e: [io  0x0064]
[ 00:12:14 ] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 00:12:14 ] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 00:12:14 ] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 00:12:14 ] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 00:12:14 ] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 00:12:14 ] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[ 00:12:14 ] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 00:12:14 ] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 00:12:14 ] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 00:12:14 ] pnp 00:10: [mem 0x000c0000-0x000cffff]
[ 00:12:14 ] pnp 00:10: [mem 0x000e0000-0x000fffff]
[ 00:12:14 ] pnp 00:10: [mem 0x00100000-0x3f6fffff]
[ 00:12:14 ] pnp 00:10: [mem 0xfed90000-0xffffffff]
[ 00:12:14 ] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 00:12:14 ] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 00:12:14 ] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 00:12:14 ] system 00:10: [mem 0x00100000-0x3f6fffff] could not be reserved
[ 00:12:14 ] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 00:12:14 ] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 00:12:14 ] pnp: PnP ACPI: found 17 devices
[ 00:12:14 ] ACPI: ACPI bus type pnp unregistered
[ 00:12:14 ] PCI: max bus depth: 1 pci_try_num: 2
[ 00:12:14 ] pci 0000:00:1c.5: BAR 9: assigned [mem 0x3f700000-0x3f8fffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1c.4: BAR 9: assigned [mem 0x3f900000-0x3fafffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1c.0: BAR 9: assigned [mem 0x3fb00000-0x3fcfffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 00:12:14 ] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[ 00:12:14 ] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[ 00:12:14 ] pci 0000:00:1c.0:   bridge window [mem 0x3fb00000-0x3fcfffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 00:12:14 ] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[ 00:12:14 ] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[ 00:12:14 ] pci 0000:00:1c.4:   bridge window [mem 0x3f900000-0x3fafffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 00:12:14 ] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[ 00:12:14 ] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[ 00:12:14 ] pci 0000:00:1c.5:   bridge window [mem 0x3f700000-0x3f8fffff 64bit pref]
[ 00:12:14 ] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 00:12:14 ] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 00:12:14 ] pci 0000:00:1c.0: setting latency timer to 64
[ 00:12:14 ] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 00:12:14 ] pci 0000:00:1c.4: setting latency timer to 64
[ 00:12:14 ] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 00:12:14 ] pci 0000:00:1c.5: setting latency timer to 64
[ 00:12:14 ] pci 0000:00:1e.0: setting latency timer to 64
[ 00:12:14 ] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[ 00:12:14 ] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[ 00:12:14 ] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 00:12:14 ] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 00:12:14 ] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xdfffffff]
[ 00:12:14 ] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 00:12:14 ] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[ 00:12:14 ] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 00:12:14 ] pci_bus 0000:01: resource 2 [mem 0x3fb00000-0x3fcfffff 64bit pref]
[ 00:12:14 ] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[ 00:12:14 ] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 00:12:14 ] pci_bus 0000:02: resource 2 [mem 0x3f900000-0x3fafffff 64bit pref]
[ 00:12:14 ] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[ 00:12:14 ] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 00:12:14 ] pci_bus 0000:03: resource 2 [mem 0x3f700000-0x3f8fffff 64bit pref]
[ 00:12:14 ] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[ 00:12:14 ] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[ 00:12:14 ] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 00:12:14 ] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 00:12:14 ] pci_bus 0000:04: resource 8 [mem 0x3f700000-0xdfffffff]
[ 00:12:14 ] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 00:12:14 ] NET: Registered protocol family 2
[ 00:12:14 ] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 00:12:14 ] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 00:12:14 ] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 00:12:14 ] TCP: Hash tables configured (established 131072 bind 65536)
[ 00:12:14 ] TCP reno registered
[ 00:12:14 ] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 00:12:14 ] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 00:12:14 ] NET: Registered protocol family 1
[ 00:12:14 ] RPC: Registered named UNIX socket transport module.
[ 00:12:14 ] RPC: Registered udp transport module.
[ 00:12:15 ] RPC: Registered tcp transport module.
[ 00:12:15 ] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 00:12:15 ] pci 0000:00:02.0: Boot video device
[ 00:12:15 ] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 00:12:15 ] pci 0000:00:1a.0: PCI INT A disabled
[ 00:12:15 ] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 00:12:15 ] pci 0000:00:1a.1: PCI INT B disabled
[ 00:12:15 ] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 00:12:15 ] pci 0000:00:1a.2: PCI INT D disabled
[ 00:12:15 ] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 00:12:15 ] pci 0000:00:1a.7: PCI INT C disabled
[ 00:12:15 ] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 00:12:15 ] pci 0000:00:1d.0: PCI INT A disabled
[ 00:12:15 ] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 00:12:15 ] pci 0000:00:1d.1: PCI INT B disabled
[ 00:12:15 ] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 00:12:15 ] pci 0000:00:1d.2: PCI INT C disabled
[ 00:12:15 ] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 00:12:15 ] pci 0000:00:1d.7: PCI INT A disabled
[ 00:12:15 ] PCI: CLS 32 bytes, default 64
[ 00:12:15 ] Trying to unpack rootfs image as initramfs...
[ 00:12:17 ] Freeing initrd memory: 4768k freed
[ 00:12:17 ] audit: initializing netlink socket (disabled)
[ 00:12:17 ] type=2000 audit(1419894738.623:1): initialized
[ 00:12:17 ] VFS: Disk quotas dquot_6.5.2
[ 00:12:17 ] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 00:12:17 ] Registering the id_resolver key type
[ 00:12:17 ] msgmni has been set to 1977
[ 00:12:17 ] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 00:12:17 ] io scheduler noop registered
[ 00:12:17 ] io scheduler cfq registered (default)
[ 00:12:17 ] pcieport 0000:00:1c.0: setting latency timer to 64
[ 00:12:17 ] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 00:12:17 ] pcieport 0000:00:1c.4: setting latency timer to 64
[ 00:12:17 ] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 00:12:17 ] pcieport 0000:00:1c.5: setting latency timer to 64
[ 00:12:17 ] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 00:12:17 ] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 00:12:17 ] serial8250: ttyS0 at I/O 0x2f8 (irq = 3) is a 16550A
[ 00:12:17 ] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
[ 00:12:17 ] brd: module loaded
[ 00:12:17 ] Loading iSCSI transport class v2.0-870.
[ 00:12:17 ] ahci 0000:00:1f.2: version 3.0
[ 00:12:17 ] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 00:12:17 ] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 00:12:17 ] ahci: SSS flag set, parallel bus scan disabled
[ 00:12:17 ] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 00:12:17 ] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[ 00:12:17 ] ahci 0000:00:1f.2: setting latency timer to 64
[ 00:12:18 ] scsi0 : ahci
[ 00:12:18 ] scsi1 : ahci
[ 00:12:18 ] scsi2 : ahci
[ 00:12:18 ] scsi3 : ahci
[ 00:12:18 ] scsi4 : ahci
[ 00:12:18 ] scsi5 : ahci
[ 00:12:18 ] ata1: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b100 irq 43
[ 00:12:18 ] ata2: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b180 irq 43
[ 00:12:18 ] ata3: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b200 irq 43
[ 00:12:18 ] ata4: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b280 irq 43
[ 00:12:18 ] ata5: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b300 irq 43
[ 00:12:18 ] ata6: SATA max UDMA/133 abar m2048@0xfe87b000 port 0xfe87b380 irq 43
[ 00:12:18 ] sata_sil24 0000:01:00.0: version 1.1
[ 00:12:18 ] sata_sil24 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 00:12:18 ] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 00:12:18 ] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 00:12:18 ] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 00:12:18 ] ata1.00: configured for UDMA/133
[ 00:12:18 ] scsi 0:0:0:0: Direct-Access     SAMSUNG  HD154UI                  1AG0 PQ: 0 ANSI: 5
[ 00:12:18 ] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 00:12:18 ] sd 0:0:0:0: [sda] Write Protect is off
[ 00:12:18 ] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 00:12:18 ] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 00:12:18 ]  sda: sda1 sda2 sda3
[ 00:12:18 ] sd 0:0:0:0: [sda] Attached SCSI disk
[ 00:12:18 ] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 00:12:18 ] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 00:12:18 ] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 00:12:18 ] ata2.00: configured for UDMA/133
[ 00:12:18 ] scsi 1:0:0:0: Direct-Access     SAMSUNG  HD204UI                  1AQ1 PQ: 0 ANSI: 5
[ 00:12:18 ] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 00:12:18 ] sd 1:0:0:0: [sdb] Write Protect is off
[ 00:12:18 ] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 00:12:18 ] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 00:12:18 ]  sdb: sdb1 sdb2 sdb3
[ 00:12:18 ] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 00:12:19 ] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 00:12:19 ] ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 00:12:19 ] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 00:12:19 ] ata3.00: configured for UDMA/133
[ 00:12:19 ] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD204UI                  1AQ1 PQ: 0 ANSI: 5
[ 00:12:19 ] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 00:12:19 ] sd 2:0:0:0: [sdc] Write Protect is off
[ 00:12:19 ] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 00:12:19 ] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 00:12:19 ]  sdc: sdc1 sdc2 sdc3
[ 00:12:19 ] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 00:12:19 ] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 00:12:19 ] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 00:12:19 ] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 00:12:19 ] ata4.00: configured for UDMA/133
[ 00:12:19 ] scsi 3:0:0:0: Direct-Access     WDC      WD20EARX-00PASB0         51.0 PQ: 0 ANSI: 5
[ 00:12:19 ] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 00:12:19 ] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 00:12:19 ] sd 3:0:0:0: [sdd] Write Protect is off
[ 00:12:19 ] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 00:12:19 ] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 00:12:19 ]  sdd: sdd1 sdd2 sdd3
[ 00:12:19 ] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 00:12:19 ] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 00:12:19 ] ata5.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 00:12:19 ] ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 00:12:19 ] ata5.00: configured for UDMA/133
[ 00:12:19 ] scsi 4:0:0:0: Direct-Access     SAMSUNG  HD154UI                  1AG0 PQ: 0 ANSI: 5
[ 00:12:19 ] sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 00:12:19 ] sd 4:0:0:0: [sde] Write Protect is off
[ 00:12:19 ] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 00:12:19 ] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 00:12:19 ]  sde: sde1 sde2 sde3
[ 00:12:19 ] sd 4:0:0:0: [sde] Attached SCSI disk
[ 00:12:20 ] sata_sil24 0000:01:00.0: setting latency timer to 64
[ 00:12:20 ] scsi6 : sata_sil24
[ 00:12:20 ] scsi7 : sata_sil24
[ 00:12:20 ] ata7: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 16
[ 00:12:20 ] ata8: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 16
[ 00:12:20 ] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 00:12:20 ] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 00:12:20 ] e1000e 0000:02:00.0: Disabling ASPM L0s L1
[ 00:12:20 ] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 00:12:20 ] e1000e 0000:02:00.0: setting latency timer to 64
[ 00:12:20 ] e1000e 0000:02:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
[ 00:12:20 ] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 00:12:20 ] ata6: SATA link down (SStatus 0 SControl 300)
[ 00:12:20 ] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:24:1d:16:5b:c5
[ 00:12:20 ] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 00:12:20 ] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 00:12:20 ] e1000e 0000:03:00.0: Disabling ASPM L0s L1
[ 00:12:20 ] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 00:12:20 ] e1000e 0000:03:00.0: setting latency timer to 64
[ 00:12:20 ] e1000e 0000:03:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
[ 00:12:20 ] e1000e 0000:03:00.0: irq 45 for MSI/MSI-X
[ 00:12:20 ] e1000e 0000:03:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:24:1d:16:5b:c5
[ 00:12:20 ] e1000e 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 00:12:20 ] e1000e 0000:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 00:12:20 ] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 00:12:20 ] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 00:12:20 ] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 00:12:20 ] rtc_cmos 00:03: RTC can wake from S4
[ 00:12:20 ] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 00:12:20 ] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 00:12:20 ] i2c /dev entries driver
[ 00:12:20 ] coretemp coretemp.0: Using relative temperature scale!
[ 00:12:20 ] coretemp coretemp.0: Using relative temperature scale!
[ 00:12:20 ] it87: Found IT8720F chip at 0xa10, revision 8
[ 00:12:20 ] it87: VID is disabled (pins used for GPIO)
[ 00:12:20 ] md: linear personality registered for level -1
[ 00:12:20 ] md: raid0 personality registered for level 0
[ 00:12:20 ] md: raid1 personality registered for level 1
[ 00:12:20 ] md: raid10 personality registered for level 10
[ 00:12:20 ] md: raid6 personality registered for level 6
[ 00:12:20 ] md: raid5 personality registered for level 5
[ 00:12:20 ] md: raid4 personality registered for level 4
[ 00:12:20 ] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 00:12:20 ] cpuidle: using governor ladder
[ 00:12:20 ] cpuidle: using governor menu
[ 00:12:20 ] TCP cubic registered
[ 00:12:20 ] NET: Registered protocol family 17
[ 00:12:20 ] Registering the dns_resolver key type
[ 00:12:20 ] registered taskstats version 1
[ 00:12:20 ] rtc_cmos 00:03: setting system clock to -12-29 23:12:22 UTC (1419894742)
[ 00:12:22 ] ata7: SATA link down (SStatus 0 SControl 0)
[ 00:12:24 ] ata8: SATA link down (SStatus 0 SControl 0)
[ 00:12:24 ] Freeing unused kernel memory: 436k freed
[ 00:12:24 ] Write protecting the kernel read-only data: 8192k
[ 00:12:24 ] Freeing unused kernel memory: 1908k freed
[ 00:12:24 ] Freeing unused kernel memory: 764k freed
[ 00:12:24 ] usbcore: registered new interface driver usbfs
[ 00:12:24 ] usbcore: registered new interface driver hub
[ 00:12:24 ] usbcore: registered new interface driver ethub
[ 00:12:24 ] usbcore: registered new device driver usb
[ 00:12:24 ] uhci_hcd: USB Universal Host Controller Interface driver
[ 00:12:24 ] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 00:12:24 ] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 00:12:24 ] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[ 00:12:24 ] hub 1-0:1.0: USB hub found
[ 00:12:24 ] hub 1-0:1.0: 2 ports detected
[ 00:12:24 ] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 00:12:24 ] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 00:12:24 ] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800
[ 00:12:24 ] hub 2-0:1.0: USB hub found
[ 00:12:24 ] hub 2-0:1.0: 2 ports detected
[ 00:12:24 ] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 00:12:24 ] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 00:12:24 ] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b480
[ 00:12:24 ] hub 3-0:1.0: USB hub found
[ 00:12:24 ] hub 3-0:1.0: 2 ports detected
[ 00:12:24 ] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 00:12:24 ] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 00:12:24 ] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[ 00:12:24 ] hub 4-0:1.0: USB hub found
[ 00:12:24 ] hub 4-0:1.0: 2 ports detected
[ 00:12:24 ] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 00:12:24 ] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 00:12:24 ] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080
[ 00:12:24 ] hub 5-0:1.0: USB hub found
[ 00:12:24 ] hub 5-0:1.0: 2 ports detected
[ 00:12:24 ] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 00:12:24 ] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 00:12:24 ] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 00:12:24 ] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 00:12:24 ] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
[ 00:12:24 ] hub 6-0:1.0: USB hub found
[ 00:12:24 ] hub 6-0:1.0: 2 ports detected
[ 00:12:24 ] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 00:12:24 ] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: debug port 1
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe87bc00
[ 00:12:24 ] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 00:12:24 ] hub 7-0:1.0: USB hub found
[ 00:12:24 ] hub 7-0:1.0: 6 ports detected
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: debug port 1
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe87b800
[ 00:12:24 ] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 00:12:24 ] hub 8-0:1.0: USB hub found
[ 00:12:24 ] hub 8-0:1.0: 6 ports detected
[ 00:12:24 ] pineview_synobios: module license 'Synology Inc.' taints kernel.
[ 00:12:24 ] Disabling lock debugging due to kernel taint
[ 00:12:24 ] -12-29 23:12:26 UTC
[ 00:12:24 ] synobios: load, major number 201
[ 00:12:24 ] Brand: Synology
[ 00:12:24 ] Model: DS-1010+
[ 00:12:24 ] set group disks wakeup number to 5, spinup time deno 1
[ 00:12:25 ] usb 8-1: new high-speed USB device number 2 using ehci_hcd
[ 00:12:25 ] synobios cpu_arch proc entry initialized
[ 00:12:25 ] synobios crypto_hw proc entry initialized
[ 00:12:25 ] synobios syno_platform proc entry initialized
[ 00:12:25 ] synobios: unload
[ 00:12:25 ] md: Autodetecting RAID arrays.
[ 00:12:25 ] md: invalid raid superblock magic on sda3
[ 00:12:25 ] md: sda3 does not have a valid v0.90 superblock, not importing!
[ 00:12:25 ] md: invalid raid superblock magic on sdb3
[ 00:12:25 ] md: sdb3 does not have a valid v0.90 superblock, not importing!
[ 00:12:25 ] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 00:12:25 ] md: invalid raid superblock magic on sdc3
[ 00:12:25 ] md: sdc3 does not have a valid v0.90 superblock, not importing!
[ 00:12:25 ] md: invalid raid superblock magic on sdd3
[ 00:12:25 ] md: sdd3 does not have a valid v0.90 superblock, not importing!
[ 00:12:25 ] md: invalid raid superblock magic on sde3
[ 00:12:25 ] md: sde3 does not have a valid v0.90 superblock, not importing!
[ 00:12:25 ] md: Scanned 15 and added 10 devices.
[ 00:12:25 ] md: autorun ...
[ 00:12:25 ] md: considering sda1 ...
[ 00:12:25 ] md:  adding sda1 ...
[ 00:12:25 ] md: sda2 has different UUID to sda1
[ 00:12:25 ] md:  adding sdb1 ...
[ 00:12:25 ] md: sdb2 has different UUID to sda1
[ 00:12:25 ] md:  adding sdc1 ...
[ 00:12:25 ] md: sdc2 has different UUID to sda1
[ 00:12:25 ] md:  adding sdd1 ...
[ 00:12:25 ] md: sdd2 has different UUID to sda1
[ 00:12:25 ] md:  adding sde1 ...
[ 00:12:25 ] md: sde2 has different UUID to sda1
[ 00:12:25 ] md: created md0
[ 00:12:25 ] md: bind
[ 00:12:25 ] Got empty serial number. Generate serial number from product.
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: running: 
[ 00:12:25 ] bio: create slab  at 1
[ 00:12:25 ] md/raid1:md0: active with 5 out of 5 mirrors
[ 00:12:25 ] md0: detected capacity change from 0 to 2549940224
[ 00:12:25 ] md: considering sda2 ...
[ 00:12:25 ] md:  adding sda2 ...
[ 00:12:25 ] md:  adding sdb2 ...
[ 00:12:25 ] md:  adding sdc2 ...
[ 00:12:25 ] md:  adding sdd2 ...
[ 00:12:25 ] md:  adding sde2 ...
[ 00:12:25 ] md: created md1
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: bind
[ 00:12:25 ] md: running: 
[ 00:12:25 ] md/raid1:md1: active with 5 out of 5 mirrors
[ 00:12:25 ] md1: detected capacity change from 0 to 2147418112
[ 00:12:25 ] md: ... autorun DONE.
[ 00:12:25 ]  md1: unknown partition table
[ 00:12:25 ]  md0: unknown partition table
[ 00:12:29 ] EXT4-fs (md0): barriers disabled
[ 00:12:29 ] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[ 00:12:31 ] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 00:12:32 ] EXT4-fs (md0): re-mounted. Opts: (null)
[ 00:12:35 ] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 00:12:35 ] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 00:12:35 ] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 00:12:35 ] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 00:12:35 ] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 00:12:35 ] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[ 00:12:36 ] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 00:12:36 ] zram: Created 2 device(s) ...
[ 00:12:36 ] Adding 305148k swap on /dev/zram0.  Priority:1 extents:1 across:305148k SS
[ 00:12:36 ] Adding 305148k swap on /dev/zram1.  Priority:1 extents:1 across:305148k SS
[ 00:12:36 ] NET: Registered protocol family 10
[ 00:12:36 ] init: syno-auth-check main process (2770) killed by TERM signal
[ 00:12:37 ] IPv6 over IPv4 tunneling driver
>[   23.409239] systemd-udevd[2940]: starting version 204
[ 00:12:40 ] fuse init (API version 7.10022)
[ 00:12:40 ] -12-29 23:12:42 UTC
[ 00:12:40 ] synobios: load, major number 201
[ 00:12:40 ] Brand: Synology
[ 00:12:40 ] Model: DS-1010+
[ 00:12:40 ] set group disks wakeup number to 5, spinup time deno 1
[ 00:12:41 ] synobios cpu_arch proc entry initialized
[ 00:12:41 ] synobios crypto_hw proc entry initialized
[ 00:12:41 ] synobios syno_platform proc entry initialized
[ 00:12:41 ] e1000e 0000:03:00.0: irq 45 for MSI/MSI-X
[ 00:12:41 ] e1000e 0000:03:00.0: irq 45 for MSI/MSI-X
[ 00:12:41 ] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 00:12:42 ] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 00:12:42 ] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 00:12:42 ] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 00:12:42 ] init: dhcp-client (eth1) main process (6187) terminated with status 15
[ 00:12:44 ] md: md6 stopped.
[ 00:12:44 ] md: bind
[ 00:12:44 ] md/raid1:md6: active with 1 out of 1 mirrors
[ 00:12:44 ] md6: detected capacity change from 0 to 1495466246144
[ 00:12:44 ]  md6: unknown partition table
[ 00:12:44 ] md: md5 stopped.
[ 00:12:44 ] md: bind
[ 00:12:44 ] md/raid1:md5: active with 1 out of 1 mirrors
[ 00:12:44 ] md5: detected capacity change from 0 to 1995563270144
[ 00:12:44 ]  md5: unknown partition table
[ 00:12:44 ] md: md3 stopped.
[ 00:12:44 ] md: bind
[ 00:12:44 ] md/raid1:md3: active with 1 out of 1 mirrors
[ 00:12:44 ] md3: detected capacity change from 0 to 1995564318720
[ 00:12:44 ]  md3: unknown partition table
[ 00:12:44 ] md: md2 stopped.
[ 00:12:44 ] md: bind
[ 00:12:44 ] md/raid1:md2: active with 1 out of 1 mirrors
[ 00:12:44 ] md2: detected capacity change from 0 to 1995563270144
[ 00:12:44 ]  md2: unknown partition table
[ 00:12:44 ] md: md4 stopped.
[ 00:12:44 ] md: bind
[ 00:12:44 ] md/raid1:md4: active with 1 out of 1 mirrors
[ 00:12:44 ] md4: detected capacity change from 0 to 1495467294720
[ 00:12:44 ]  md4: unknown partition table
[ 00:12:44 ] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 00:12:44 ] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 00:12:48 ] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 00:12:48 ] nf_conntrack version 0.5.0 (7934 buckets, 31736 max)
[ 00:12:48 ] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 00:12:50 ] EXT4-fs (md4): barriers disabled
[ 00:12:50 ] EXT4-fs (md3): barriers disabled
[ 00:12:50 ] EXT4-fs (md6): barriers disabled
[ 00:12:50 ] EXT4-fs (md2): barriers disabled
[ 00:12:50 ] EXT4-fs (md4): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 00:12:50 ] EXT4-fs (md6): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 00:12:50 ] EXT4-fs (md3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 00:12:50 ] EXT4-fs (md5): barriers disabled
[ 00:12:50 ] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 00:12:50 ] EXT4-fs (md5): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 00:12:52 ] Initializing USB Mass Storage driver...
[ 00:12:52 ] scsi8 : usb-storage 8-1:1.0
[ 00:12:52 ] usbcore: registered new interface driver usb-storage
[ 00:12:52 ] USB Mass Storage support registered.
[ 00:12:52 ] usbcore: registered new interface driver usblp
[ 00:12:52 ] usbcore: registered new interface driver usbhid
[ 00:12:52 ] usbhid: USB HID core driver
[ 00:12:53 ] ata2.00: configured for UDMA/133
[ 00:12:53 ] ata2: EH complete
[ 00:12:53 ] ata1.00: configured for UDMA/133
[ 00:12:53 ] ata1: EH complete
[ 00:12:53 ] ata3.00: configured for UDMA/133
[ 00:12:53 ] ata3: EH complete
[ 00:12:53 ] ata4.00: configured for UDMA/133
[ 00:12:53 ] ata4: EH complete
[ 00:12:53 ] ata5.00: configured for UDMA/133
[ 00:12:53 ] ata5: EH complete
[ 00:12:53 ] scsi 8:0:0:0: Direct-Access     Synology Diskstation              1.0  PQ: 0 ANSI: 2
[ 00:12:53 ] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 00:12:53 ] sd 8:0:0:0: [synoboot] 250880 512-byte logical blocks: (128 MB/122 MiB)
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Write Protect is off
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Mode Sense: 00 00 00 00
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Asking for cache data failed
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Asking for cache data failed
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 00:12:53 ]  synoboot: synoboot1 synoboot2
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Asking for cache data failed
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 00:12:53 ] sd 8:0:0:0: [synoboot] Attached SCSI disk
[ 00:12:55 ] eth0: no IPv6 routers present
[ 00:12:57 ] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 00:12:58 ] ata1.00: configured for UDMA/133
[ 00:12:58 ] ata1: EH complete
[ 00:12:58 ] ata2.00: configured for UDMA/133
[ 00:12:58 ] ata2: EH complete
[ 00:12:58 ] ata3.00: configured for UDMA/133
[ 00:12:58 ] ata3: EH complete
[ 00:12:59 ] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 00:12:59 ] NFSD: starting 90-second grace period
[ 00:12:59 ] netlink: 12 bytes leftover after parsing attributes.
[ 00:12:59 ] ata4.00: configured for UDMA/133
[ 00:12:59 ] ata4: EH complete
[ 00:12:59 ] ata5.00: configured for UDMA/133
[ 00:12:59 ] ata5: EH complete
[ 00:13:01 ] loop: module loaded
[ 00:13:01 ] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[ 00:13:01 ] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\Seriale. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
[ 00:13:02 ] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\Filmy. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
[ 00:13:02 ] CIFS VFS: Autodisabling the use of server inode numbers on \\XXX.XXX.XXX.XXX\FilmyHD. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
[ 00:13:08 ] findhostd uses obsolete (PF_INET,SOCK_PACKET)

 

I don't know if it gonna help anyone or if this is the right way and place to paste the logs.

Link to comment
Share on other sites

thanks for your feedback but that is indeed all based in the image that is included in the build environment. What i mean is the Nano boot images that you can download here http://www.xpenology.nl/boot-images/#IMG (choose IMG (USB image voor installatie op hardware) i use 5.0.3.2.). If you mount that images only a zImage and a boot folder is presents. No ramdisk (rd.gz) file seems to be present (also no other partition where it is stored on). But this version allows you to install a 5004 pat file.

 

Thats what I've done to extract ramdisk from nanoboot in order to include additional driver module in it and make some changes in rc files:

1. We need to extract zImage to vmlinux bunary by using scripts/extract-vmlinux utility in kernel source tree.

2. In vmlinux binary search for cpio magic string '0707'. That will give us start of ramdisk offset.

3. In vmlinux binary search for end of cpio magic string 'TRAILER!!!'. From this we can calculate the size of cpio binary.

4. Strip cpio ramdisk binary from vmlinux by using dd utility and starting offset and size.

5. Extract files from ramdisk using cpio.

 

After making some changes to include your ramdisk files in kernel you need to do a reverse procedure:

1. Use cpio to pack files in one binary.

2. Use make config in kernel sources to set init_ramdisk to your file (somewhere in 'General kernel parameters' menu).

3. Make kernel zImage which will include your ramdisk. Put it in .IMG or simply copy it to mounted flash disk overwriting old version.

Link to comment
Share on other sites

thanks for your feedback but that is indeed all based in the image that is included in the build environment. What i mean is the Nano boot images that you can download here http://www.xpenology.nl/boot-images/#IMG (choose IMG (USB image voor installatie op hardware) i use 5.0.3.2.). If you mount that images only a zImage and a boot folder is presents. No ramdisk (rd.gz) file seems to be present (also no other partition where it is stored on). But this version allows you to install a 5004 pat file.

 

Thats what I've done to extract ramdisk from nanoboot in order to include additional driver module in it and make some changes in rc files:

1. We need to extract zImage to vmlinux bunary by using scripts/extract-vmlinux utility in kernel source tree.

2. In vmlinux binary search for cpio magic string '0707'. That will give us start of ramdisk offset.

3. In vmlinux binary search for end of cpio magic string 'TRAILER!!!'. From this we can calculate the size of cpio binary.

4. Strip cpio ramdisk binary from vmlinux by using dd utility and starting offset and size.

5. Extract files from ramdisk using cpio.

 

After making some changes to include your ramdisk files in kernel you need to do a reverse procedure:

1. Use cpio to pack files in one binary.

2. Use make config in kernel sources to set init_ramdisk to your file (somewhere in 'General kernel parameters' menu).

3. Make kernel zImage which will include your ramdisk. Put it in .IMG or simply copy it to mounted flash disk overwriting old version.

 

So i've just checked Nanoboot's initramfs and the scripts are a little bit different. In details:

 

- Kernel boot parameter upgrade replaces only some lines in /etc/VERSION instead of a complete file

- init scripts always remove /dev/synobios if present

- init scripts replace some standard Synology bin's such as scemd

 

You can find the compressed initramfs (gzipped) here: https://www.dropbox.com/s/xlbwzp4nmjqx7 ... fs.gz?dl=0

Link to comment
Share on other sites

 

What are the commands for below steps:

2. In vmlinux binary search for cpio magic string '0707'. That will give us start of ramdisk offset.

3. In vmlinux binary search for end of cpio magic string 'TRAILER!!!'. From this we can calculate the size of cpio binary.

4. Strip cpio ramdisk binary from vmlinux by using dd utility and starting offset and size.

5. Extract files from ramdisk using cpio.

 

I've got it extracted using the script, but I can't seem to find any cpio commands that makes sense.

 

My search for the first occurrence of CPIO magic header and ending string have been rewarded with a 35 Byte large cpio package. Consequently, I believe the vmlinux contains multiple cpio sections and you have to find the right one.

 

I've used 'binwalk' to find the correct CPIO package. As there are many false positive inside the vmlinux binary, I simply decompressed everything binwalk found.

Link to comment
Share on other sites

 

My search for the first occurrence of CPIO magic header and ending string have been rewarded with a 35 Byte large cpio package. Consequently, I believe the vmlinux contains multiple cpio sections and you have to find the right one.

 

I've used 'binwalk' to find the correct CPIO package. As there are many false positive inside the vmlinux binary, I simply decompressed everything binwalk found.

 

Well, I think it's beyond my skills. I first put the list of files to a text file resulting in something like this:

 

DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
0             0x0             ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV)
2113122       0x203E62        Zlib compressed data, default compression
2118901       0x2054F5        Zlib compressed data, default compression
2600084       0x27AC94        Zlib compressed data, best compression
2866326       0x2BBC96        Zlib compressed data, default compression
3241685       0x3176D5        LZMA compressed data, properties: 0xB8, dictionary size: 2097152 bytes, uncompressed size: 807683271 bytes
3924944       0x3BE3D0        Zlib compressed data, compressed
3950308       0x3C46E4        Zlib compressed data, compressed
4084752       0x3E5410        Zlib compressed data, best compression
4205012       0x4029D4        Zlib compressed data, best compression
4321820       0x41F21C        Zlib compressed data, best compression
4532468       0x4528F4        Zlib compressed data, best compression

 

But then I fail :smile:. Can't seem to find the rd image or I don't know how to use dd and cpio.

I've use some commands like: grep -abo 0707 vmlinux | head -n1 and grep -abo TRAILER vmlinux | head -n1 and these give me some numbers back.

I then use dd with offset to export to .cpio. But can't seem to extract the cpio.

 

It's beyond my skillset... :sad:

 

The following will automatically extract any found compressed data (including the initramfs)

binwalk -e vmlinux

Link to comment
Share on other sites

---Cross Thread Post---

 

A DSM 5.1 boot image is under heavy development behind closed doors with a team of contributors (sancome included). We have had great success and are in the process of working out the last few bugs. Try to be patient and wait for a release announcement.

Link to comment
Share on other sites

For sure, we will be patient. I would have had enough skills to help you but the way is long to get it.

My G7 is working like a charm thanks to xpenology and I have a dedicated vm for further tests on your future release. Count on me as pilot user !

Hope you will get rid of these last few bugs quickly.

Thank you for your work.

Link to comment
Share on other sites

---Cross Thread Post---

 

A DSM 5.1 boot image is under heavy development behind closed doors with a team of contributors (sancome included). We have had great success and are in the process of working out the last few bugs. Try to be patient and wait for a release announcement.

 

This is fecking excellent news, all "power to the keyboard" to the development team - you guys are just the best and thank you for your work so far.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...