Jump to content
XPEnology Community

What am I doing wrong? Proxmox 6.1-3 and Jun’s Loader v1.03b DS3615xs


Recommended Posts


This is my problem:


Dell RX720 running Proxmox and I would like to try DSM sin handle my filesharing via smb. However I run into truble with find.synology.com won't show my unit. 


This is what I have done:

1. Download Jun’s Loader v1.03b DS3615xs

2. Download DSM_DS1817_24922.pat

3. Followed https://xpenology.com/forum/topic/7387-tutorial-dsm-6x-on-proxmox/page/7/


I used bitwise to ssh into proxmox and add jun's, this is my config file:



agent: 1
args: -device ich9-usb-ehci1,id=usb,multifunction=on,bus=pci.0,addr=0xa -drive file=/var/lib/vz/images/103/synoboot.raw,format=raw,if=none,id=drive-usb-disk2,cache=writeback -device usb-storage,bus=usb.0,port=2,drive=drive-usb-disk2,id=usb-disk2,bootindex=1,removable=off 
balloon: 0
bios: ovmf
boot: cn
bootdisk: synoboot
cores: 4
efidisk0: local-lvm:vm-103-disk-1,size=128K
ide2: none,media=cdrom
memory: 8192
name: DSMnas
net0: e1000=DA:97:D0:E2:B8:6D,bridge=vmbr0,firewall=1
numa: 0
ostype: l26
sata0: local-lvm:vm-103-disk-0,size=32G
smbios1: uuid=c7a3196b-40f5-4720-a1b3-e65f110c0c4d
sockets: 1
vmgenid: 175467e4-082a-4a06-a02f-ca9cfba70378


After reading



I'm just confused since this is quite new for me



-netdev type=tap,id=net0,ifname=tap103i0 -device e1000e,mac=DA:97:D0:E2:B8:6D
-netdev type=tap103,id=net0,ifname=tap103i0 -device e1000e,mac=DA:97:D0:E2:B8:6D,netdev=net0,bus=pci.0,addr=0x12,id=net0


These parts confused the most, if I should have 1 of them or not? One placed I read it as they should be removed, another place said keep. However if I kept proxmox gave me error for duplicate fo net0



Any suggestions for a noob?

Link to comment
Share on other sites

1 hour ago, christians86 said:

2. Download DSM_DS1817_24922.pat


where did you read that you can use a different type then the one of the loader?

DS1817 is wront, you will have to use "DSM_DS3615xs_24922.pat" when using loader 1.03b for 3615xs

also when using 6.2.2 aka 24922 you will have to use a different driver package aka extra.lzma


(2nd half about 3615/17)

or if you don't want to do this yet you can use loder 1.03b with v23739

Link to comment
Share on other sites

47 minutes ago, IG-88 said:

DS1817 is wront, you will have to use "DSM_DS3615xs_24922.pat" when using loader 1.03b for 3615xs



I was so sure that I had clicked right. However - as described above I never got longer that the boot screen saying go to http to find your synology. So is there anything with my setup (usb, ethernet etc) that is wrong?



Link to comment
Share on other sites

I followed this from scratch throwing away everything else above:


This is the setup for my VM:



after find.synology.com I get the right device, and I click on the DS and agree to EULA, next message is



Connection failed. Please check your network settings.


If I use synology assistant I manage to set:

  • Password
  • DCHP
  • Upload file DSM_DS3615xs_23739
  • Error code 38 is given


Link to comment
Share on other sites

i don't use proxmox, so i cant say much

the mac in grub.cfg should be the same as in the vm config

whats the scsi controller for?

can you connect a virtual com port into the vm? dsm switches to serial output shortly after start, all the interesting stuff can then only be seen with a serial port and a terminal (like putty)


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...