Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 5


flyride
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

image.thumb.png.ced169d13f901a696d0e906f2a7a5a7b.png

 

https://www.synology.com/en-global/releaseNote/DS918+

Spoiler

(2020-01-15)

Important Note

  1. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
  2. This update will restart your Synology NAS.

 

Fixed Issues

  1. Enhanced the compatibility of M.2 NVMe SSD devices.

 

⚠️ Note the update of NVMe code. ⚠️

Anyone who has used the NVMe patch should consider removing cache prior to applying this update

Edited by Polanskiman
Please respect the READ ME topic pinned at the root of this section.
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: real3x mod

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comments: This was a DSM instance patched for NVMe. Disabled SSD Cache prior to upgrade.

  Upgrade completed normally. NVMe SSD still recognized and verified no change to libsynonvme.so.  R/O Cache reinstalled without issue.

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7U2

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G5400/3700 / ASRock H370M-ITX/AC / 8GB / 6xWD 4TB 

- Additional comments: Only one NIC working

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: YES (IG-88 v0.6)

- Installation type: BAREMETAL - ASRock B250M Pro4 / Intel X520-DA1 / 4x WD Red 3TB / 2x Intenso nVME 120GB SSD

- Additional comments: REBOOT REQUIRED. removed SSD Cache before the Upgrade, after Reboot recreated the Cache again.

  • Like 2
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 4

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - ASRock J4105-ITX, RAM 8GB, SSD WD 500GB;  Powerman ME-100 60W  Win10 + VMWare WS Player 15 + 918DSM

- Additional Comment: Reboot required

 

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 4

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Yes, ASRock E3C226D2I, Xeon E3-1285L v3, RAM 16 GB;  4TB*3 WD Blue; SSD WB Blue 500GB; Ablecom CS-M50 250W; UPS Ippon 650

- Additional Comment: Reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-X150M-PLUS / Cpu : E3-1240L v5 / Ram : 16G Ecc / Nic : RTL8111

- Additional Comment: Reboot required

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: Jun's v1.04b - DS918+

- Using custom extra.lzma: real3x mod

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional Comment: Reboot required. Cache is not used.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: Jun's v1.04b DS918

- Using custom extra.lzma: real3x mod

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comments: No reboot

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-4

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6 

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO (Couldn't boot with IG-88's extra.lzma, maybe a wrong swap or something. Just reverted to original Jun's loader and worked fine)

- Installation type: BAREMETAL - Some Chinese B365 mITX IPFS board + Intel G5400  / NIC: 2x Intel I211AT (igb) (seen people ripped apart a real DS918+ and it was 2x i211AT too)

- Additional comments: Only pressed the DSM manual upgrade button in the UI and just ditched it there for a few minutes, it just did the rest and the login screen appears afterwards. Intel i211AT perfectly supports 6.2.2-24922! H.265 hardware transcoding works fine (remember to turn off VT-D in your BIOS settings, I read it somewhere else). VMM also works fine.

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - Asus PRIME H110M2  / Cpu: i3 7100 / Ram: 16G / Nic: BCM5709

- Additional Comment: Reboot required

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: YES. IG-88's v0.7beta

- Installation type: BAREMETAL - HP ProLiant Microserver Gen10 X3421, 32GB ECC RAM, Intel NVME 2TB + Aquantia 10gbit

- Additional Comment: Manual PAT v5 install and reboot required. Both NVME as standalone drive and 10gbit 3rd NIC worked after boot without any fixes.

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 9020 / Intel i350-t4

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: YES. IG-88's v0.5

- Installation type: BAREMETAL - HP Compaq Elite 8300 CMT, 16GB ECC RAM

- Additional Comment: Hybrid Boottable / Thx Jamkiki72

Link to comment
Share on other sites

BOX 1

- Outcome of the update: SUCCESSFUL

- DSM version prior update: NONE

- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus Z170 Pro Gaming/6770k

 

BOX 2

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus Z97-Pro/4790k

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-update5

- Lo ader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: yes

- Installation type: BAREMETAL - Asrock J3455m,ram8,hdd 3tb

- Additional comments: Reboot slow 5min

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Prodesk 280 G1 / CPU : i3-4160 / Ram : 2x2GB DDR3 Hynix / Integrated NIC

- Additional Comment: Reboot Required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro MBD-X11SCL-IF-O, mini-ITX, Intel C242 chipset, CPU Intel Core™ i3-9100F, RAM 32GB, HDD Seagate NAS 4*3=8TB (SHR), WD Ultrastar 12TB, SSD Intel 545s 512GB, Power Thermaltake TR-500P 500W, Back-UPS CS 650

- Additional Comment: Reboot required

Edited by Polanskiman
SHR Size
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 4
- Loader version and model: Jun's Loader v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock H370M-ITX - G5600

- Additional Comment: Reboot required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: None

- Loader version and model: Juns v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - GA-Z87X-UD5H 1217-V&1210 intel nics, 4670k, 16gb ram.

- Additional Comment: Reboot required, 10min timeout in browser, had to refresh. Used rufus to burn image and added to cfg in boot menu.

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: YES - extra918plus_v0.8_syno

- Installation type: BAREMETAL - ASRock J5005-ITX

- Additional Comment: Reboot Required

Link to comment
Share on other sites

  • 1 month later...

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922u4
- Loader version and model: JUN'S LOADER v1.04b - DS918+ 
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.7u3
- Additional Comment: Manual download

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...