Recommended Posts

Posted (edited)

NO HARD DISK FOUND ERROR ON DS3615xs while installation

ERROR.png

Edited by deep4231
PROPER ERROR

Share this post


Link to post
Share on other sites

To the OP.

 

Please provide detailed information on your hardware, loader etc. Without it we cannot help.

 

Also I would suggest reading the rules and FAQs. Uppercase use is not tolerated specially in the title.

Quote form the rules:

Quote

4. Your topic does not deserve any more attention than others seeking help hence topic titles must reflect their content, and topic titles containing things like: 'please help' 'look here' ' 'urgent' or other inaccurate descriptions will be removed without warning. This includes all-caps titles.

  • Like 1

Share this post


Link to post
Share on other sites

Greetings, gentlemen. I decided that creating a new topic does not make sense if I have the same problem as the author. As I understand it, this is a fairly common situation:

Скрытый текст

 

 

I read these messages, but have not yet found an answer how to solve the problem. So I'll try to give a description of my system, if more detailed information is required, I will be glad to provide it:

 

Processor:    Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2 cores)
Mother board:    Gigabyte GA-G31M-ES2L
Memory:        KVR667D2N5/2G
(x2)

 

I tried to install DSM 6.2.2 with loader DS3615xs 1.03b (fresh install) from this topic

 

As usual, I flashed the image on a USB flash drive, booted from it and through the console replaced VID and PID in GRUB.cfg.

Web interface started but I see the same picture - No Hard Disk Found on DS3615xs.

 

After searching the internet I found this topic.

I tried to replace extra.lzma with file from here and zImage and rd.gz from file DSM_DS3615xs_24922.pat, but still get the same result.

Tell me, please, are there any chances to start DSM 6.2.2 on my system or is there no point in trying further ?
 

Edited by diqipib

Share this post


Link to post
Share on other sites

@diqipib  It seems like there are many revisions of that mainboard... 

But, first thing first, have you identified the onboard SATA controller, and verified the ports are set to AHCI ?

 

Edit:

Nevermind .. 

It seems like your MB's chipset does not support AHCI. It has the ICH7 southbridge, not the ICH7R or ICH7M.

Edited by bearcat
  • Like 1

Share this post


Link to post
Share on other sites

bearcat, thanks for Your answer !

1) So the problem is in SATA controller ?

 

2) Hm. I checked BIOS settings. That's what I see:

 

Скрытый текст

BIOS.thumb.png.383e74aedee20bc2da6c26f04dfb10fc.png

 

3) Previously I successfully used loader 1.02b DS3615xs with DSM 6.1.7. I thought, if motherboard doesn't support AHCI, it can't run DSM at all (I mean any version of it). Am I wrong ? 🙄

Edited by diqipib

Share this post


Link to post
Share on other sites

@diqipib Well, that was new info ...

from your post, it looked like a fresh install, using that mainboard for the first time with DSM.

If it worked with 1.02b and 6.1.x, I would assume that drivers for your SATA controller was one of many "lost" in the newer releases.

Doublecheck your controllers ID and driver (with a 1.02b loader and DSM 6.1.x, using a spare HDD if you have it).

Then, try to search the "extra drivers" thread, to see if you fin it there.

 

 

btw:

To be honest, I was sure that you needed AHCI support on any SATA controller beeing used :36_flushed:

Share this post


Link to post
Share on other sites

@bearcat

 

Цитата

from your post, it looked like a fresh install, using that mainboard for the first time with DSM.

U r right. My fault. ☺️
 

Цитата

 If it worked with 1.02b and 6.1.x, I would assume that drivers for your SATA controller was one of many "lost" in the newer releases.

Do I understand correctly that then I have no chance to start 6.2.2 ? After all, Synology built in signing file protection and since extra.lzma from 6.2.2 doesn’t include my driver, I can't add it from another extra.lzma from previous versions,  cause it has another sign that doesn't match new bootloader ? Am I wrong ?

 

Цитата

Doublecheck your controllers ID and driver (with a 1.02b loader and DSM 6.1.x, using a spare HDD if you have it).

 Please, can You tell me how to find controller ID ? Now I installed DSM 6.1.7-15284 again. What shall I do next ? 🙄

 

Цитата

Then, try to search the "extra drivers" thread, to see if you fin it there.

It sounds like I still have chances. ))

 

Цитата

To be honest, I was sure that you needed AHCI support on any SATA controller beeing used 

It's good. So life can still surprise us. 😉

Edited by diqipib

Share this post


Link to post
Share on other sites

@bearcat, I used dmesg with su rights.

 

"dmesg | grep SATA" returns this:
 

Цитата

[    2.785339] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    2.785342] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19


Maybe it can help ? Any ideas ? ) 

 

 

Below is the full result of dmesg:

Скрытый текст

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15284 SMP Sat May 19 04:16:44 CST 2018
[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=XXXXXXXXXXXX mac1=YYYYYYYYYYYY mac2=YYYYYYYYYYYY mac3=YYYYYYYYYYYY mac4=YYYYYYYYYYYY netif_num=4 vid=0x13fe pid=0x3e00
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf5dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5e2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2L/G31M-ES2L, BIOS FI 08/09/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 130000000 mask FF0000000 uncachable
[    0.000000]   7 base 0CF600000 mask FFFF00000 uncachable
[    0.000000] e820: update [mem 0xcf600000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf5e0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f53c0-0x000f53cf] mapped at [ffff8800000f53c0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE
[    0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
[    0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[    0.000000]  [mem 0x12fe00000-0x12fffffff] page 2M
[    0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[    0.000000]  [mem 0x12c000000-0x12fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[    0.000000]  [mem 0x100000000-0x12bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcf5dffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xcf3fffff] page 2M
[    0.000000]  [mem 0xcf400000-0xcf5dffff] page 4k
[    0.000000] RAMDISK: [mem 0x37062000-0x37828fff]
[    0.000000] ACPI: RSDP 0x00000000000F6DB0 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CF5E3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CF5E30C0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CF5E3180 040E8 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000CF5E0000 00040
[    0.000000] ACPI: HPET 0x00000000CF5E73C0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CF5E7440 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000CF5E7480 0625A (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000CF5E72C0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000CF5EDD40 003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcf5dffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1045886
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11557 pages used for memmap
[    0.000000]   DMA32 zone: 845280 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cf5e0000 - 00000000cf5e3000
[    0.000000] PM: Registered nosave memory: 00000000cf5e3000 - 00000000cf5f0000
[    0.000000] PM: Registered nosave memory: 00000000cf5f0000 - 00000000cf600000
[    0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] e820: [mem 0xcf600000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88012fc00000 s69376 r8192 d20736 u524288
[    0.000000] pcpu-alloc: s69376 r8192 d20736 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031564
[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=XXXXXXXXXXXX mac1=YYYYYYYYYYYY mac2=YYYYYYYYYYYY mac3=YYYYYYYYYYYY mac4=YYYYYYYYYYYY netif_num=4 vid=0x13fe pid=0x3e00
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3615xs-j
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: XXXXXXXXXXXX
[    0.000000] Mac1: YYYYYYYYYYYY
[    0.000000] Mac2: YYYYYYYYYYYY
[    0.000000] Mac3: YYYYYYYYYYYY
[    0.000000] Mac4: YYYYYYYYYYYY
[    0.000000] Internal netif num: 4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 4032436k/4980736k available (4814k kernel code, 797192k absent, 151108k reserved, 3793k data, 760k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2999.886 MHz processor
[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.77 BogoMIPS (lpj=2999886)
[    0.001007] pid_max: default: 32768 minimum: 301
[    0.001040] Security Framework initialized
[    0.001050] AppArmor: AppArmor initialized
[    0.001058] Mount-cache hash table entries: 256
[    0.001241] Initializing cgroup subsys memory
[    0.001257] Initializing cgroup subsys devices
[    0.001259] Initializing cgroup subsys freezer
[    0.001261] Initializing cgroup subsys blkio
[    0.001286] CPU: Physical Processor ID: 0
[    0.001287] CPU: Processor Core ID: 0
[    0.001288] mce: CPU supports 6 MCE banks
[    0.001294] CPU0: Thermal monitoring enabled (TM2)
[    0.001300] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
               Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
               tlb_flushall_shift: -1
[    0.001353] Freeing SMP alternatives: 24k freed
[    0.001362] ACPI: Core revision 20130328
[    0.002775] ACPI: All ACPI Tables successfully acquired
[    0.003409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.013498] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (fam: 06, model: 0f, stepping: 0b)
[    0.014000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.014000] perf_event_intel: PEBS disabled due to CPU errata
[    0.014000] ... version:                2
[    0.014000] ... bit width:              40
[    0.014000] ... generic registers:      2
[    0.014000] ... value mask:             000000ffffffffff
[    0.014000] ... max period:             000000007fffffff
[    0.014000] ... fixed-purpose events:   3
[    0.014000] ... event mask:             0000000700000003
[    0.014000] smpboot: Booting Node   0, Processors  #1
[    0.025033] Brought up 2 CPUs
[    0.025037] smpboot: Total of 2 processors activated (11999.54 BogoMIPS)
[    0.026057] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.027041] devtmpfs: initialized
[    0.027175] PM: Registering ACPI NVS region [mem 0xcf5e0000-0xcf5e2fff] (12288 bytes)
[    0.027175] xor: measuring software checksum speed
[    0.036672]    prefetch64-sse: 13060.000 MB/sec
[    0.046672]    generic_sse: 11464.000 MB/sec
[    0.046673] xor: using function: prefetch64-sse (13060.000 MB/sec)
[    0.046710] NET: Registered protocol family 16
[    0.047053] ACPI: bus type PCI registered
[    0.047066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.047066] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.047223] PCI: Using configuration type 1 for base access
[    0.050027] bio: create slab <bio-0> at 0
[    0.067007] raid6: sse2x1   gen()  5484 MB/s
[    0.084005] raid6: sse2x1   xor()  5025 MB/s
[    0.101009] raid6: sse2x2   gen()  5847 MB/s
[    0.118001] raid6: sse2x2   xor()  6310 MB/s
[    0.135007] raid6: sse2x4   gen()  8996 MB/s
[    0.152001] raid6: sse2x4   xor()  6970 MB/s
[    0.152002] raid6: using algorithm sse2x4 gen() (8996 MB/s)
[    0.152003] raid6: .... xor() 6970 MB/s, rmw enabled
[    0.152004] raid6: using ssse3x2 recovery algorithm
[    0.152020] ACPI: Added _OSI(Module Device)
[    0.152021] ACPI: Added _OSI(Processor Device)
[    0.152022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152024] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152475] ACPI: EC: Look up EC in DSDT
[    0.154770] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0x32, should be 0x31 (20130328/tbutils-320)
[    0.154849] ACPI: SSDT 0x00000000CF5ED720 0022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.154960] ACPI: Dynamic OEM Table Load:
[    0.154962] ACPI: SSDT 0x0000000000000000 0022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.155033] ACPI: SSDT 0x00000000CF5EDBE0 00152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.155135] ACPI: Dynamic OEM Table Load:
[    0.155137] ACPI: SSDT 0x0000000000000000 00152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.155237] ACPI: Interpreter enabled
[    0.155248] ACPI: (supports S0 S4 S5)
[    0.155249] ACPI: Using IOAPIC for interrupt routing
[    0.155283] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.155283] ACPI: No dock devices found.
[    0.159101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.159173] PCI host bridge to bus 0000:00
[    0.159173] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.159173] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.159173] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.159173] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.159173] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.159173] pci_bus 0000:00: root bus resource [mem 0xcf600000-0xfebfffff]
[    0.159173] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.159173] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[    0.159173] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
[    0.159173] pci 0000:00:02.0: reg 14: [io  0xff00-0xff07]
[    0.159173] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.159173] pci 0000:00:02.0: reg 1c: [mem 0xfde00000-0xfdefffff]
[    0.159173] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.159173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.159173] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.160014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.160044] pci 0000:00:1d.0: reg 20: [io  0xfe00-0xfe1f]
[    0.160092] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.160117] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.160117] pci 0000:00:1d.1: reg 20: [io  0xfd00-0xfd1f]
[    0.160117] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.160117] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.160117] pci 0000:00:1d.2: reg 20: [io  0xfc00-0xfc1f]
[    0.160117] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.160117] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.160117] pci 0000:00:1d.3: reg 20: [io  0xfb00-0xfb1f]
[    0.160117] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.160117] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.160117] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[    0.160121] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.160138] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.160138] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.160138] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.160138] pci 0000:00:1f.0: address space collision: [io  0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
[    0.160138] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.160138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.160138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.160158] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.160158] pci 0000:00:1f.2: reg 10: [io  0xf700-0xf707]
[    0.160158] pci 0000:00:1f.2: reg 14: [io  0xf600-0xf603]
[    0.160158] pci 0000:00:1f.2: reg 18: [io  0xf500-0xf507]
[    0.160158] pci 0000:00:1f.2: reg 1c: [io  0xf400-0xf403]
[    0.160158] pci 0000:00:1f.2: reg 20: [io  0xf300-0xf30f]
[    0.160158] pci 0000:00:1f.2: PME# supported from D3hot
[    0.161013] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.161049] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.161176] pci 0000:01:00.0: [1186:4300] type 00 class 0x020000
[    0.161176] pci 0000:01:00.0: reg 10: [io  0xce00-0xceff]
[    0.161176] pci 0000:01:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit]
[    0.161176] pci 0000:01:00.0: reg 20: [mem 0xfdafc000-0xfdafffff 64bit pref]
[    0.161176] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.161176] pci 0000:01:00.0: supports D1 D2
[    0.161176] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.163013] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.163018] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.163022] pci 0000:00:1c.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.163027] pci 0000:00:1c.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.163060] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.163060] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.163060] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.163061] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.163063] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.163065] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.163068] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.163070] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.163072] pci 0000:00:1e.0:   bridge window [mem 0xcf600000-0xfebfffff] (subtractive decode)
[    0.163081] pci_bus 0000:00: on NUMA node 0
[    0.163085] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.163087] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.163180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.163224] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.163268] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.163310] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.163352] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.163395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.163437] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.163479] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.163540] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.163540] acpi root: \_SB_.PCI0 notify handler is installed
[    0.163540] Found 1 acpi root devices
[    0.164010] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.164013] vgaarb: loaded
[    0.164014] vgaarb: bridge control possible 0000:00:02.0
[    0.164061] SCSI subsystem initialized
[    0.164061] ACPI: bus type ATA registered
[    0.164061] libata version 3.00 loaded.
[    0.164061] pps_core: LinuxPPS API ver. 1 registered
[    0.164061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.164061] PTP clock support registered
[    0.164061] PCI: Using ACPI for IRQ routing
[    0.168776] PCI: pci_cache_line_size set to 64 bytes
[    0.168802] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.168805] e820: reserve RAM buffer [mem 0xcf5e0000-0xcfffffff]
[    0.168817] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.169021] Switching to clocksource hpet
[    0.169064] AppArmor: AppArmor Filesystem Enabled
[    0.169093] pnp: PnP ACPI init
[    0.169097] ACPI: bus type PNP registered
[    0.169194] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.169197] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.169199] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.169201] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.169203] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.169205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.169215] pnp 00:01: [dma 4]
[    0.169244] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.169323] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.169372] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.169406] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.169444] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.169530] pnp 00:06: [dma 2]
[    0.169571] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.169740] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.169914] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.170036] system 00:09: [io  0x0400-0x04cf] could not be reserved
[    0.170039] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.170200] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.170202] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.170348] system 00:0b: [mem 0x000cd000-0x000cffff] has been reserved
[    0.170350] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.170353] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.170354] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.170356] system 00:0b: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
[    0.170358] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.170360] system 00:0b: [mem 0x00100000-0xcf5dffff] could not be reserved
[    0.170362] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.170364] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.170366] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.170369] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.170371] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.170373] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.170375] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.170377] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.170424] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[    0.170429] pnp: PnP ACPI: found 13 devices
[    0.170430] ACPI: bus type PNP unregistered
[    0.177965] pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
[    0.177970] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref]
[    0.177973] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.177975] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.177979] pci 0000:00:1c.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.177982] pci 0000:00:1c.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.177986] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.177988] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.177992] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.177995] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.178062] pci 0000:00:1e.0: setting latency timer to 64
[    0.178065] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.178067] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.178069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.178070] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.178072] pci_bus 0000:00: resource 8 [mem 0xcf600000-0xfebfffff]
[    0.178074] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.178075] pci_bus 0000:01: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.178077] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.178079] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.178081] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.178082] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.178084] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.178085] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.178087] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.178089] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[    0.178090] pci_bus 0000:02: resource 8 [mem 0xcf600000-0xfebfffff]
[    0.178121] NET: Registered protocol family 2
[    0.178262] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.178373] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.178490] TCP: Hash tables configured (established 32768 bind 32768)
[    0.178515] TCP: reno registered
[    0.178517] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.178532] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.178582] NET: Registered protocol family 1
[    0.178651] RPC: Registered named UNIX socket transport module.
[    0.178652] RPC: Registered udp transport module.
[    0.178654] RPC: Registered tcp transport module.
[    0.178655] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.178661] pci 0000:00:02.0: Boot video device
[    0.179107] PCI: CLS 4 bytes, default 64
[    0.179137] Trying to unpack rootfs image as initramfs...
[    1.484824] Freeing initrd memory: 7964k freed
[    1.497664] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.497669] software IO TLB [mem 0xcb5e0000-0xcf5e0000] (64MB) mapped at [ffff8800cb5e0000-ffff8800cf5dffff]
[    1.507099] audit: initializing netlink socket (disabled)
[    1.507113] type=2000 audit(1579447998.506:1): initialized
[    1.513392] bounce pool size: 64 pages
[    1.514578] VFS: Disk quotas dquot_6.5.2
[    1.514596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.515384] NFS: Registering the id_resolver key type
[    1.515394] Key type id_resolver registered
[    1.515395] Key type id_legacy registered
[    1.515407] msgmni has been set to 7891
[    1.515498] async_tx: api initialized (async)
[    1.515551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.515553] io scheduler noop registered
[    1.515555] io scheduler deadline registered
[    1.515561] io scheduler cfq registered (default)
[    1.516086] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    2.122171] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.143749] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.143852] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[    2.213389] brd: module loaded
[    2.218064] ACPI Warning: 0x0000000000000428-0x000000000000042F SystemIO conflicts with Region \GP2C 1 (20130328/utaddress-249)
[    2.218072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.218075] Unknown LPC device 27b8
[    2.221141] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.225684] Loading iSCSI transport class v2.0-870.
[    2.249060] rdac: device handler registered
[    2.264106] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.298379] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    2.298382] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    2.499029] tsc: Refined TSC clocksource calibration: 2999.999 MHz
[    2.499034] Switching to clocksource tsc
[    2.548095] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.548194] rtc_cmos 00:03: RTC can wake from S4
[    2.548638] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.548661] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.549530] i2c /dev entries driver
[    2.553732] coretemp coretemp.0: Using relative temperature scale!
[    2.553743] coretemp coretemp.0: Using relative temperature scale!
[    2.553773] it87: Found IT8718F chip at 0x290, revision 8
[    2.553789] it87: Beeping is supported
[    2.557842] md: linear personality registered for level -1
[    2.557846] md: raid0 personality registered for level 0
[    2.557847] md: raid1 personality registered for level 1
[    2.557848] md: raid10 personality registered for level 10
[    2.559382] md: raid6 personality registered for level 6
[    2.559386] md: raid5 personality registered for level 5
[    2.559387] md: raid4 personality registered for level 4
[    2.559389] md: raidF1 personality registered for level 45
[    2.560630] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    2.560633] cpuidle: using governor ladder
[    2.560635] cpuidle: using governor menu
[    2.560701] TCP: cubic registered
[    2.560703] NET: Registered protocol family 17
[    2.560728] Key type dns_resolver registered
[    2.568526] registered taskstats version 1
[    2.570169] rtc_cmos 00:03: setting system clock to 2020-01-19 15:33:19 UTC (1579447999)
[    2.570875] Freeing unused kernel memory: 760k freed
[    2.571074] Write protecting the kernel read-only data: 8192k
[    2.571188] Freeing unused kernel memory: 1320k freed
[    2.572328] Freeing unused kernel memory: 500k freed
[    2.614176] ACPI: bus type USB registered
[    2.614724] usbcore: registered new interface driver usbfs
[    2.615224] usbcore: registered new interface driver hub
[    2.616885] usbcore: registered new interface driver ethub
[    2.618898] usbcore: registered new device driver usb
[    2.627084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.630677] ehci-pci: EHCI PCI platform driver
[    2.630773] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    2.630781] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.630787] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.634679] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[    2.634695] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[    2.640018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.640228] hub 1-0:1.0: USB hub found
[    2.640232] hub 1-0:1.0: 8 ports detected
[    2.648119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.655083] uhci_hcd: USB Universal Host Controller Interface driver
[    2.655177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.655180] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.655186] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.655209] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[    2.655542] hub 2-0:1.0: USB hub found
[    2.655547] hub 2-0:1.0: 2 ports detected
[    2.655642] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.655645] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.655649] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.655679] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[    2.657040] hub 3-0:1.0: USB hub found
[    2.657046] hub 3-0:1.0: 2 ports detected
[    2.657154] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.657156] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.657161] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.657190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[    2.659242] hub 4-0:1.0: USB hub found
[    2.659247] hub 4-0:1.0: 2 ports detected
[    2.659351] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.659354] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.659358] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.659389] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[    2.662780] hub 5-0:1.0: USB hub found
[    2.662788] hub 5-0:1.0: 2 ports detected
[    2.704148] usbcore: registered new interface driver usb-storage
[    2.716071] VMware PVSCSI driver - version 1.0.2.0-k
[    2.720669] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    2.725400] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    2.740874] Fusion MPT base driver 3.04.20
[    2.740878] Copyright (c) 1999-2008 LSI Corporation
[    2.747479] Fusion MPT SPI Host driver 3.04.20
[    2.752263] Fusion MPT SAS Host driver 3.04.20
[    2.756886] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.756953] mptctl: Registered with Fusion MPT base driver
[    2.756955] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.761435] ata_piix 0000:00:1f.2: version 2.13
[    2.761510] ata_piix 0000:00:1f.2: MAP [
[    2.761511]  P0 P2 P1 P3 ]
[    2.761536] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.769017] scsi0 : ata_piix
[    2.772963] scsi1 : ata_piix
[    2.774347] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    2.774350] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    2.931016] ata1: Read current link speed fail, retry 1
[    2.942009] ata1: Read current link speed fail, retry 2
[    2.953034] ata1: Read current link speed fail, retry 3
[    2.974012] ata2: Read current link speed fail, retry 1
[    2.985009] ata2: Read current link speed fail, retry 2
[    2.996009] ata2: Read current link speed fail, retry 3
[    3.020227] ata2.00: HPA detected: current 1953523055, native 1953525168
[    3.020231] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[    3.020234] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.039222] ata2.00: configured for UDMA/133
[    3.041020] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    3.045740] scsi 1:0:0:0: Direct-Access     SAMSUNG  HD103UJ                  1AA0 PQ: 0 ANSI: 5
[    3.046327] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.046360] sd 1:0:0:0: [sdb] Write Protect is off
[    3.046363] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.046377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.058247]  sdb: sdb1 sdb2
[    3.058956] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.069130] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    3.079710] mpt2sas version 20.00.00.00 loaded
[    3.090983] mpt3sas version 01.100.01.00 loaded
[    3.100825] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    3.100828] Disabling lock debugging due to kernel taint
[    3.101473] 2020-1-19 15:33:20 UTC
[    3.101476] synobios: load, major number 201
[    3.101478] Brand: Synology
[    3.101480] Model: DS-3615xs
[    3.101482] set group disks wakeup number to 4, spinup time deno 7
[    3.602023] synobios cpu_arch proc entry initialized
[    3.602026] synobios crypto_hw proc entry initialized
[    3.602028] synobios syno_platform proc entry initialized
[    3.608541] synobios: unload
[    3.615200] md: Autodetecting RAID arrays.
[    3.633467] md: Scanned 2 and added 2 devices.
[    3.633470] md: autorun ...
[    3.633472] md: considering sdb1 ...
[    3.633477] md:  adding sdb1 ...
[    3.633479] md: sdb2 has different UUID to sdb1
[    3.633484] md: created md0
[    3.633486] md: bind<sdb1>
[    3.633498] md: running: <sdb1>
[    3.633639] md/raid1:md0: active with 1 out of 12 mirrors
[    3.633653] md0: detected capacity change from 0 to 2549940224
[    3.633703] md: considering sdb2 ...
[    3.633706] md:  adding sdb2 ...
[    3.634269] md: created md1
[    3.634271] md: bind<sdb2>
[    3.634278] md: running: <sdb2>
[    3.636560] md/raid1:md1: active with 1 out of 12 mirrors
[    3.636576] md1: detected capacity change from 0 to 2147418112
[    3.637274] md: ... autorun DONE.
[    3.648621]  md0: unknown partition table
[    3.712924] usb-storage 1-7:1.0: USB Mass Storage device detected
[    3.713899] scsi2 : usb-storage 1-7:1.0
[    3.846082] EXT4-fs (md0): barriers disabled
[    3.858852] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[    4.046022] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    4.235223] Got empty serial number. Generate serial number from product.
[    4.720366] scsi 2:0:0:0: Direct-Access     UFD 2.0  Silicon-Power4G          PMAP PQ: 0 ANSI: 4
[    4.722300] sd 2:0:0:0: [synoboot] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[    4.722881] sd 2:0:0:0: [synoboot] Write Protect is off
[    4.722886] sd 2:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[    4.724120] sd 2:0:0:0: [synoboot] No Caching mode page found
[    4.730001] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[    4.742000] sd 2:0:0:0: [synoboot] No Caching mode page found
[    4.747896] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[    4.765895]  synoboot: synoboot1 synoboot2 synoboot3
[    4.770867] sd 2:0:0:0: [synoboot] No Caching mode page found
[    4.776743] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[    4.783341] sd 2:0:0:0: [synoboot] Attached SCSI removable disk
[   11.463693]  md1: unknown partition table
[   11.489034] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   13.736191] 2020-1-19 15:33:31 UTC
[   13.736196] synobios: load, major number 201
[   13.736200] Brand: Synology
[   13.736202] Model: DS-3615xs
[   13.736203] set group disks wakeup number to 4, spinup time deno 7
[   14.237081] synobios cpu_arch proc entry initialized
[   14.237086] synobios crypto_hw proc entry initialized
[   14.237089] synobios syno_platform proc entry initialized
[   14.244186] synobios: unload
[   24.719195] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   25.778538] EXT4-fs (md0): re-mounted. Opts: (null)
[   31.450721] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   31.450764] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   31.768663] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   32.089929] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   32.090313] zram: Created 2 device(s) ...
[   32.099815] Adding 1212412k swap on /dev/zram0.  Priority:1 extents:1 across:1212412k SS
[   32.108593] Adding 1212412k swap on /dev/zram1.  Priority:1 extents:1 across:1212412k SS
[   35.932262] NET: Registered protocol family 10
[   35.958186] sit: IPv6 over IPv4 tunneling driver
[   36.066034] init: syno-auth-check main process (5600) killed by TERM signal
[   36.751326] ACPI: Requesting acpi_cpufreq
[   37.341810] fuse init (API version 7.22)
[   37.354778] dca service started, version 1.12.1
[   37.357950] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   37.357953] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   37.366196] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   37.366199] Copyright (c) 2007-2015 Intel Corporation.
[   37.382900] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
[   37.382903] Copyright(c) 1999 - 2016 Intel Corporation.
[   37.382927] ixgbe unsupported_sfp_notify proc entry initialized
[   37.409109] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19
[   37.409112] i40e: Copyright(c) 2013 - 2016 Intel Corporation.
[   37.456460] tn40xx low_mem_msg proc entry initialized
[   37.456463] tn40xx low_mem_counter proc entry initialized
[   37.456465] tn40xx debug_msg proc entry initialized
[   37.456466] tn40xx: Tehuti Network Driver, 0.3.6.12.3
[   37.460349] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
[   37.460450] r8168 0000:01:00.0: irq 41 for MSI/MSI-X
[   37.462273] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   37.462277] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   37.535066] qed_init called
[   37.535069] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[   37.535070] creating debugfs root node
[   37.553553] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[   37.575846] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   37.575849] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   37.614752] Compat-mlnx-ofed backport release: cd30181
[   37.614755] Backport based on mlnx_ofed/mlnx_rdma.git cd30181
[   37.614756] compat.git: mlnx_ofed/mlnx_rdma.git
[   37.991217] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
[   38.083066] systemd-udevd[6148]: starting version 204
[   38.301183] bio: create slab <bio-1> at 1
[   38.312169] Btrfs loaded
[   38.341208] exFAT: Version 1.2.9
[   38.616175] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   38.630027] sky2: driver version 1.30
[   38.636836] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   38.644523] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[   38.655123] QLogic/NetXen Network Driver v4.0.80
[   38.658527] Solarflare NET driver v3.2
[   38.661833] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   38.661835] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   38.664910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   38.667867] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[   38.676679] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[   38.695567] usbcore: registered new interface driver ax88179_178a
[   38.698496] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[   38.698501] ACPI: Power Button [PWRB]
[   38.698550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   38.698552] ACPI: Power Button [PWRF]
[   38.848337] 2020-1-19 15:33:56 UTC
[   38.848342] synobios: load, major number 201
[   38.848345] Brand: Synology
[   38.848347] Model: DS-3615xs
[   38.848349] set group disks wakeup number to 4, spinup time deno 7
[   39.349026] synobios cpu_arch proc entry initialized
[   39.349030] synobios crypto_hw proc entry initialized
[   39.349032] synobios syno_platform proc entry initialized
[   39.819933] eth0: 0xffffc90011392000, 00:11:32:52:e8:2d, IRQ 41
[   39.864206] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.294706] init: dhcp-client (eth0) main process (8118) killed by TERM signal
[   42.429556] usbcore: registered new interface driver usblp
[   42.480283] usbcore: registered new interface driver usbhid
[   42.480287] usbhid: USB HID core driver
[   42.489783] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
[   42.489794] hid-generic 0003:045E:0780.0001: input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.2-2/input0
[   42.496332] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input3
[   42.496338] Get empty minor:104
[   42.496390] hid-generic 0003:045E:0780.0002: input,hiddev0: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.2-2/input1
[   42.871501] r8168: eth0: link up
[   42.871516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.999252] init: dhcp-client (eth0) main process (8568) killed by TERM signal
[   44.366277] ata2.00: configured for UDMA/133
[   44.366284] ata2: EH complete
[   49.192573] iSCSI:target_core_rodsp_server.c:1021:rodsp_server_init RODSP server started, login_key(YYYYYYYYYYYY).
[   49.206249] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized
[   49.218915] iSCSI:target_core_device.c:571:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   49.219051] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   49.246379] iSCSI:target_core_file.c:92:fd_attach_hba RODSP plugin for fileio is enabled.
[   49.246390] iSCSI:target_core_ep.c:862:ep_attach_hba RODSP plugin for epio is enabled.
[   49.246394] iSCSI:target_core_ep.c:869:ep_attach_hba ODX Token Manager is enabled.
[   49.539142] loop: module loaded
[   91.658292] ata2.00: configured for UDMA/133
[   91.658302] ata2: EH complete
[   93.290738] init: synostoraged main process (8826) killed by USR1 signal
[   93.290789] init: synostoraged main process ended, respawning
 

 

I replaced real sn and macs with XXXXXXXXX / YYYYYYYYYY

 

Edited by diqipib

Share this post


Link to post
Share on other sites

if

On-Chip Primary PCI IDE, disabled

On-Chip SATA Mode, Enhanced

does not work as ahci you are out of luck with dsm 6.2.2

 

8 hours ago, diqipib said:

[    2.761435] ata_piix 0000:00:1f.2: version 2.13
[    2.761510] ata_piix 0000:00:1f.2: MAP [
[    2.761511]  P0 P2 P1 P3 ]
[    2.761536] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.769017] scsi0 : ata_piix
[    2.772963] scsi1 : ata_piix

 

with 6.1 you use the driver ata_piix for the 4 sata ports, not ahci

(you might use "lspci -k | grep 'Kernel driver'" to see this too)

 

https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/

Driver not in this release: ata_piix, mptspi (aka lsi scsi), mptsas (aka lsi sas) - these are drivers for extremely old hardware and mainly important for vmware users, also the vmw_pvscsi is confirmed not to work, bad for vmware/esxi too

jun's 6.2.0 loader 1.03b did contain this driver but it did not work with 6.2.2 anymore and the driver i compiled from the synology source (> 2 years old) for 6.2.2 did not work - as with the i915 (backported) driver jun left no patch or documentation about what he did to make that work so i can't reproduce it (no coding or c++ skills), as before no one else did something like a patch so the only thing to do is to document the "loss" and go on, loosing a 15 year old hardware might not hurt that much and if some one wants to use it as nas he can still use a older version of dsm or use a real linux (open source) system like open media vault

 

so 6.2.0 might work for you but 6.2.2 is no possible atm without a different controller (had the same on one of my older test systems, added a ahci 2 port controller to use it for testing 6.2.2)

 

  • Like 1

Share this post


Link to post
Share on other sites

@IG-88 Thank you so much for such a detailed answer! Now the reason is clear. So I have to either buy a SATA controller, or use alternatives like FreeNAS. It's a pity. Loved the beautiful design of XPenology. ) Although, I will try to write Jun. Maybe he could offer an option.

Share this post


Link to post
Share on other sites

 

By the way, I forgot to clarify. I felt the need to switch to 6.2.2, because in 6.1.7, even with update 3, the DSM functionality for receiving letsencrypt certificate stopped working for me. In a loop, it reports an error and offers to log into DSM.

Share this post


Link to post
Share on other sites

@flyride , yes, of course you are right ! In the end, I can even get the certificate artificially and install it with the same DSM functionality, but the fact is that the old version of DSM 5.1.7 is slowly starting to get glitches, because Synology stops supporting it and the built-in functionality stops working. So, something else may "fall off" tomorrow and no one will fix it. It makes me sad. In addition, an alternative way to obtain a certificate is more time consuming. And DSM for me is in simplicity and convenience. If I have to use an alternative, then it already makes sense to abandon DSM in favor of other solutions. Maybe I'm wrong, but I see it like this. 😏

Edited by diqipib

Share this post


Link to post
Share on other sites

Hi, i have some problem with old MB GA-946GM-DS2 - 4xSATA on ICH7 chipset

If i use external PCI-e SATA card i can install DSM6.2.3? Or i need change MB for new

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.