Jump to content
XPEnology Community

Proxmox 6.0-7 - Jun 1.03b DS3617xs - DSM 6.2.2-24922-4. Kernel panic


romansoft

Recommended Posts

Hi,

 

I booted from loader 1.03b-ds3617xs, entered Syno's web-GUI and chose to install latest DSM (6.2.2-24922-4). Then rebooted and now I always get a Kernel panic when booting.

 

Proxmox's host is Ivy Bridge:

  • CPU model name      : Intel(R) Xeon(R) CPU E3-1265L V2 @ 2.50GHz

 

This is my Proxmox's config, which basically includes:

  • e1000e hack
  • Since Proxmox may only boot from USB if using UEFI and 1.03b doesn't support UEFI, I selected Seabios but did another hack: booting from CD and then chain-loads to USB.
  • 1.03b loader is embeded in a physical USB


 

Quote

 

root@proxmox:~# cat /etc/pve/qemu-server/100.conf
#net0%3A e1000=00%3A11%3A32%3A73%3A68%3AAB,bridge=vmbr0
# Fix para usar e1000e
args: -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=00:11:32:73:68:AB,netdev=net0,bus=pci.0,addr=0x12,id=net0
bios: seabios
boot: d
cores: 4
cpu: IvyBridge
hotplug: disk,network,usb
ide2: local:iso/plpbt-usbboot.iso,media=cdrom,size=538K
memory: 1024
name: NAS-Synology
numa: 1
ostype: l26
parent: DSM62_update2
sata0: /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K1CN3NJK,size=3907018584K
scsihw: virtio-scsi-pci
serial0: socket
smbios1: uuid=9ba1da8f-1321-4a5e-8b00-c7020e51f8ee
sockets: 1
usb0: host=1-1.2

 


 

 

Boot process log (ends up with kernel panic)

 

Quote

root@proxmox:/mnt# qm term 100
starting serial terminal on interface serial0 (press Ctrl+O to exit)

                   GNU GRUB  version 2.02~beta2-36ubuntu3.14

 +----------------------------------------------------------------------------+
 |*DS3617xs 6.2 Baremetal with Jun's Mod v1.03b                               | 
 | DS3617xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall                     |
 | DS3617xs 6.2 VMWare/ESXI with Jun's Mod v1.03b                             |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            | 
 +----------------------------------------------------------------------------+

      Use the ^ and v keys to select which entry is highlighted.          
      Press enter to boot the selected OS, `e' to edit the commands       
      before booting or `c' for a command-line.                           
   The highlighted entry will be executed automatically in 0s.                 
error: failure writing sector 0x3205 to `hd0'.

Press any key to continue...
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffde max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [mem 0x000f5ab0-0x000f5abf] mapped at [ffff8800000f5ab0]
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ac2000, 0x01ac2fff] PGTABLE
[    0.000000] BRK [0x01ac3000, 0x01ac3fff] PGTABLE
[    0.000000] BRK [0x01ac4000, 0x01ac4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[    0.000000]  [mem 0x3fc00000-0x3fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[    0.000000]  [mem 0x3c000000-0x3fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3fe00000-0x3ffddfff]
[    0.000000]  [mem 0x3fe00000-0x3ffddfff] page 4k
[    0.000000] BRK [0x01ac5000, 0x01ac5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3669f000-0x37ffffff]
[    0.000000] ACPI: RSDP 0x00000000000F58D0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000003FFE25AC 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000003FFE2388 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000003FFE0040 02348 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000003FFE0000 00040
[    0.000000] ACPI: APIC 0x000000003FFE23FC 00090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000003FFE248C 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: SRAT 0x000000003FFE24C4 000E8 (v01 BOCHS  BXPCSRAT 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffddfff]
[    0.000000] On node 0 totalpages: 262012
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3528 pages used for memmap
[    0.000000]   DMA32 zone: 258014 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xfeffbfff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88003fc00000 s76864 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s76864 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258402
[    0.000000] Kernel command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1710ODXXXXXXX mac1=XXXXXXXXXX netif_num=1 vid=0x13fe pid=0x4100 earlycon=uart8250,io,0x3f8,115200n8 earlyprintk loglevel=15
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3617xs-j
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: 1710ODN128000
[    0.000000] Mac1: 0011327368AB
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Memory: 994544k/1048440k available (4896k kernel code, 392k absent, 53504k reserved, 3722k data, 788k init)
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.571 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.14 BogoMIPS (lpj=2494571)
[    0.001000] pid_max: default: 32768 minimum: 301
[    0.001000] Security Framework initialized
[    0.001000] AppArmor: AppArmor initialized
[    0.001000] Mount-cache hash table entries: 256
[    0.001000] Initializing cgroup subsys memory
[    0.001000] Initializing cgroup subsys devices
[    0.001000] Initializing cgroup subsys freezer
[    0.001000] Initializing cgroup subsys blkio
[    0.001000] CPU: Physical Processor ID: 0
[    0.001000] CPU: Processor Core ID: 0
[    0.001000] mce: CPU supports 10 MCE banks
[    0.001000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.001000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.001000] tlb_flushall_shift: 2
[    0.001000] FEATURE SPEC_CTRL Not Present
[    0.001000] FEATURE IBPB_SUPPORT Not Present
[    0.001000] Spectre V2 : Vulnerable: Minimal ASM retpoline
[    0.001000] Freeing SMP alternatives: 24k freed
[    0.001000] ACPI: Core revision 20130328
[    0.001000] ACPI: All ACPI Tables successfully acquired
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011088] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (fam: 06, model: 3a, stepping: 09)
[    0.013037] TSC deadline timer enabled
[    0.013920] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.014844] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.015066] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.052026] Brought up 4 CPUs
[    0.052779] smpboot: Total of 4 processors activated (19956.56 BogoMIPS)
[    0.053529] devtmpfs: initialized
[    0.055101] xor: automatically using best checksumming function:
[    0.064000]    avx       : 24204.000 MB/sec
[    0.064000] NET: Registered protocol family 16
[    0.067098] ACPI: bus type PCI registered
[    0.068051] PCI: Using configuration type 1 for base access
[    0.083160] bio: create slab <bio-0> at 0
[    0.101312] raid6: sse2x1   gen()  8468 MB/s
[    0.118179] raid6: sse2x1   xor()  6669 MB/s
[    0.135892] raid6: sse2x2   gen() 10253 MB/s
[    0.152260] raid6: sse2x2   xor()  7505 MB/s
[    0.169084] raid6: sse2x4   gen() 12187 MB/s
[    0.187000] raid6: sse2x4   xor()  8902 MB/s
[    0.187003] raid6: using algorithm sse2x4 gen() (12187 MB/s)
[    0.188004] raid6: .... xor() 8902 MB/s, rmw enabled
[    0.190004] raid6: using ssse3x2 recovery algorithm
[    0.191152] ACPI: Added _OSI(Module Device)
[    0.192003] ACPI: Added _OSI(Processor Device)
[    0.192920] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.193003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.194269] ACPI: EC: Look up EC in DSDT
[    0.195622] ACPI: Interpreter enabled
[    0.196009] ACPI: (supports S0 S4 S5)
[    0.196583] ACPI: Using IOAPIC for interrupt routing
[    0.198030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.199623] ACPI: No dock devices found.
[    0.216060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.217007] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.218004] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.219015] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.221034] PCI host bridge to bus 0000:00
[    0.221592] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.222020] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.222854] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.224006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.224944] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.226004] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff]
[    0.227029] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.228255] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.230371] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.233004] pci 0000:00:01.1: reg 20: [io  0xe0e0-0xe0ef]
[    0.235035] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.237990] pci 0000:00:01.2: reg 20: [io  0xe000-0xe01f]
[    0.240064] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.241203] pci 0000:00:01.3: address space collision: [io  0x0600-0x063f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000600-0x00000603 flags 0x80000000]
[    0.244014] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.245138] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.246805] pci 0000:00:02.0: reg 10: [mem 0xfd000000-0xfdffffff pref]
[    0.249004] pci 0000:00:02.0: reg 18: [mem 0xfea94000-0xfea94fff]
[    0.253299] pci 0000:00:02.0: reg 30: [mem 0xfea80000-0xfea8ffff pref]
[    0.255097] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.256639] pci 0000:00:03.0: reg 10: [io  0xe020-0xe03f]
[    0.260004] pci 0000:00:03.0: reg 20: [mem 0xfe400000-0xfe403fff 64bit pref]
[    0.263438] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601
[    0.267261] pci 0000:00:07.0: reg 20: [io  0xe040-0xe05f]
[    0.268531] pci 0000:00:07.0: reg 24: [mem 0xfea95000-0xfea95fff]
[    0.270032] pci 0000:00:12.0: [8086:10d3] type 00 class 0x020000
[    0.271675] pci 0000:00:12.0: reg 10: [mem 0xfea40000-0xfea5ffff]
[    0.274920] pci 0000:00:12.0: reg 14: [mem 0xfea60000-0xfea7ffff]
[    0.275989] pci 0000:00:12.0: reg 18: [io  0xe060-0xe07f]
[    0.277994] pci 0000:00:12.0: reg 1c: [mem 0xfea90000-0xfea93fff]
[    0.282637] pci 0000:00:12.0: reg 30: [mem 0xfea00000-0xfea3ffff pref]
[    0.284357] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.287435] pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
[    0.289030] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.291344] pci 0000:00:1d.1: reg 20: [io  0xe0a0-0xe0bf]
[    0.294035] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.296545] pci 0000:00:1d.2: reg 20: [io  0xe0c0-0xe0df]
[    0.298671] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.299360] pci 0000:00:1d.7: reg 10: [mem 0xfea96000-0xfea96fff]
[    0.303067] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.304713] pci 0000:00:1e.0: reg 10: [mem 0xfea97000-0xfea970ff 64bit]
[    0.307074] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.308596] pci 0000:00:1f.0: reg 10: [mem 0xfea98000-0xfea980ff 64bit]
[    0.311213] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.312018] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.313016] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.313909] pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit pref]
[    0.316198] pci 0000:00:1f.0: PCI bridge to [bus 02]
[    0.317016] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.317923] pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.319031] pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit pref]
[    0.320736] pci_bus 0000:00: on NUMA node 0
[    0.322324] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.323287] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.324290] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.325654] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.326364] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.328040] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.328040] acpi root: \_SB_.PCI0 notify handler is installed
[    0.328897] Found 1 acpi root devices
[    0.330038] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.331019] vgaarb: loaded
[    0.331451] vgaarb: bridge control possible 0000:00:02.0
[    0.333201] SCSI subsystem initialized
[    0.333535] ACPI: bus type ATA registered
[    0.335044] libata version 3.00 loaded.
[    0.336026] pps_core: LinuxPPS API ver. 1 registered
[    0.336619] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.337030] PTP clock support registered
[    0.338017] PCI: Using ACPI for IRQ routing
[    0.338614] PCI: pci_cache_line_size set to 64 bytes
[    0.339172] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.340004] e820: reserve RAM buffer [mem 0x3ffde000-0x3fffffff]
[    0.341088] Switching to clocksource hpet
[    0.342209] AppArmor: AppArmor Filesystem Enabled
[    0.343215] pnp: PnP ACPI init
[    0.343723] ACPI: bus type PNP registered
[    0.344615] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.345857] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.347361] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.348380] pnp 00:03: [dma 2]
[    0.349072] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.350752] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.352309] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[    0.353944] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
[    0.355337] pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
[    0.356806] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.357841] pnp: PnP ACPI: found 9 devices
[    0.358500] ACPI: bus type PNP unregistered
[    0.394398] pci 0000:00:01.3: BAR 13: [io  0x0600-0x063f] has bogus alignment
[    0.395863] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.397046] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.399129] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.400641] pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit pref]
[    0.402735] pci 0000:00:1f.0: PCI bridge to [bus 02]
[    0.403582] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.405145] pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.406599] pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit pref]
[    0.431478] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.432912] pci 0000:00:1e.0: setting latency timer to 64
[    0.455812] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.457612] pci 0000:00:1f.0: setting latency timer to 64
[    0.458731] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.459565] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.460394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.461275] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.462197] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff]
[    0.463174] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.463981] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[    0.464953] pci_bus 0000:01: resource 2 [mem 0xfe200000-0xfe3fffff 64bit pref]
[    0.466068] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.466882] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.467820] pci_bus 0000:02: resource 2 [mem 0xfe000000-0xfe1fffff 64bit pref]
[    0.469289] NET: Registered protocol family 2
[    0.470424] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    0.471514] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.472386] TCP: Hash tables configured (established 8192 bind 8192)
[    0.473260] TCP: reno registered
[    0.473759] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.474714] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.475998] NET: Registered protocol family 1
[    0.477229] RPC: Registered named UNIX socket transport module.
[    0.478108] RPC: Registered udp transport module.
[    0.478790] RPC: Registered tcp transport module.
[    0.479538] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.480539] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.481477] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.506263] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.530608] pci 0000:00:02.0: Boot video device
[    0.554618] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.717378] PCI: CLS 64 bytes, default 64
[    0.718398] Trying to unpack rootfs image as initramfs...
[    1.025814] Freeing initrd memory: 25988k freed
[    1.029565] cepsw: module verification failed: signature and/or required key missing - tainting kernel
[    1.054108] Initialise module verification
[    1.055077] audit: initializing netlink socket (disabled)
[    1.055832] type=2000 audit(1577467497.055:1): initialized
[    1.058053] bounce pool size: 64 pages
[    1.059441] VFS: Disk quotas dquot_6.5.2
[    1.060472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.066645] NFS: Registering the id_resolver key type
[    1.067377] Key type id_resolver registered
[    1.067911] Key type id_legacy registered
[    1.068488] msgmni has been set to 1993
[    1.070786] async_tx: api initialized (async)
[    1.071567] Key type asymmetric registered
[    1.072545] Asymmetric key parser 'x509' registered
[    1.073943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.075414] io scheduler noop registered
[    1.076402] io scheduler deadline registered
[    1.077084] io scheduler cfq registered (default)
[    1.385498] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.411782] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.413699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[    1.451101] brd: module loaded
[    1.454555] Loading iSCSI transport class v2.0-870.
[    1.470384] rdac: device handler registered
[    1.473346] ahci 0000:00:07.0: version 3.0
[    1.496934] ahci 0000:00:07.0: irq 40 for MSI/MSI-X
[    1.498595] ahci 0000:00:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    1.500397] ahci 0000:00:07.0: flags: 64bit ncq only 
[    1.501345] ahci 0000:00:07.0: setting latency timer to 64
[    1.512765] scsi0 : ahci
[    1.515770] scsi1 : ahci
[    1.517124] scsi2 : ahci
[    1.518791] scsi3 : ahci
[    1.520641] scsi4 : ahci
[    1.522188] scsi5 : ahci
[    1.523643] ata1: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95100 irq 40
[    1.525551] ata2: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95180 irq 40
[    1.526618] ata3: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95200 irq 40
[    1.528043] ata4: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95280 irq 40
[    1.529183] ata5: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95300 irq 40
[    1.530195] ata6: SATA max UDMA/133 abar m4096@0xfea95000 port 0xfea95380 irq 40
[    1.535259] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.539280] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.540538] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.541989] rtc_cmos 00:00: RTC can wake from S4
[    1.543699] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.545419] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    1.547451] i2c /dev entries driver
[    1.548565] md: linear personality registered for level -1
[    1.549973] md: raid0 personality registered for level 0
[    1.551280] md: raid1 personality registered for level 1
[    1.552630] md: raid10 personality registered for level 10
[    1.554538] md: raid6 personality registered for level 6
[    1.555857] md: raid5 personality registered for level 5
[    1.557152] md: raid4 personality registered for level 4
[    1.558451] md: raidF1 personality registered for level 45
[    1.560481] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.562576] cpuidle: using governor ladder
[    1.563489] cpuidle: using governor menu
[    1.564093] TCP: cubic registered
[    1.564584] NET: Registered protocol family 17
[    1.565275] Key type dns_resolver registered
[    1.836202] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.838111] ata5: SATA link down (SStatus 0 SControl 300)
[    1.839312] ata2: SATA link down (SStatus 0 SControl 300)
[    1.840194] ata3: SATA link down (SStatus 0 SControl 300)
[    1.840985] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    1.842228] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.843530] ata1.00: SN:QM00005
[    1.844145] ata1.00: applying bridge limits
[    1.845132] ata6: SATA link down (SStatus 0 SControl 300)
[    1.846310] ata4: SATA link down (SStatus 0 SControl 300)
[    1.847669] ata1.00: configured for UDMA/100
[    1.848269] ata1.00: Find SSD disks. [QEMU HARDDISK]
[    1.849454] scsi 0:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    1.851854] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    1.853363] sd 0:0:0:0: [sda] Write Protect is off
[    1.854120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.854939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.860128]  sda: sda1 sda2
[    1.862134] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.863391] Loading module verification blacklist certificates
[    1.864603] Loading module verification certificates
[    1.865587] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    1.869093] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    1.871462] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    1.873318] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    1.874824] registered taskstats version 1
[    1.876394] rtc_cmos 00:00: setting system clock to 2019-12-27 17:24:58 UTC (1577467498)
[    1.878439] Freeing unused kernel memory: 788k freed
[    1.879597] Write protecting the kernel read-only data: 8192k
[    1.881236] Freeing unused kernel memory: 1236k freed
[    1.883203] Freeing unused kernel memory: 476k freed
patching file etc/rc
Hunk #1 succeeded at 182 (offset 11 lines).
patching file etc/synoinfo.conf
Hunk #1 FAILED at 261.
1 out of 1 hunk FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #1 succeeded at 40 with fuzz 2 (offset 1 line).
Hunk #2 succeeded at 141 (offset 6 lines).
Hunk #3 succeeded at 579 (offset 28 lines).
patching file usr/sbin/init.post
cat: can't open '/etc/synoinfo_override.conf': No such file or directory
START /linuxrc.syno
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore[    1.963061] ACPI: bus type USB registered
[    1.964779] usbcore: registered new interface driver usbfs
[    1.966289] usbcore: registered new interface driver hub
[    1.968202] usbcore: registered new interface driver ethub
[    1.969546] usbcore: registered new device driver usb
 ... [  OK  ]
:: Loading module ehci-hcd[    1.982573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ... [  OK  ]
:: Loading module ehci-pci[    1.989693] ehci-pci: EHCI PCI platform driver
[    2.013714] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    2.014606] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.015663] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.017209] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[    2.018195] BUG: unable to handle kernel paging request at ffff88003dad4300
[    2.018195] IP: [<ffff88003dad4300>] 0xffff88003dad42ff
[    2.018195] PGD 1ac2067 PUD 1ac3067 PMD 800000003da000e3 
[    2.018195] Oops: 0011 [#1] SMP 
[    2.018195] Modules linked in: ehci_pci(F+) ehci_hcd(F) usbcore usb_common mv14xx(O) cepsw(OF)
[    2.018195] CPU: 2 PID: 3444 Comm: insmod Tainted: GF          O 3.10.105 #24922
[    2.018195] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[    2.018195] task: ffff88003db79800 ti: ffff880039ec4000 task.ti: ffff880039ec4000
[    2.018195] RIP: 0010:[<ffff88003dad4300>]  [<ffff88003dad4300>] 0xffff88003dad42ff
[    2.018195] RSP: 0018:ffff880039ec7b78  EFLAGS: 00010046
[    2.018195] RAX: ffff88003d44d810 RBX: 0000000000000006 RCX: 0000000000000002
[    2.018195] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88003d4d2800
[    2.018195] RBP: ffff88003d4d2800 R08: ffff880039ec7b84 R09: 000000000000fffb
[    2.018195] R10: 0000000000000000 R11: 00000000000001ae R12: 0000000000000000
[    2.018195] R13: ffff880039ec7bbe R14: 0000000000000246 R15: ffffffffa00ecb40
[    2.018195] FS:  00007fa6dec5a700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000
[    2.018195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.018195] CR2: ffff88003dad4300 CR3: 0000000039d1e000 CR4: 00000000001406e0
[    2.018195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.018195] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    2.018195] Stack:
[    2.018195]  ffffffff81293625 0000000039ec7bd8 000000000000001a 000000000000000a
[    2.018195]  ffff88003d4d1ff8 0000000000000000 ffff88003d4d2090 ffffffff81298746
[    2.018195]  0000000000000001 ffff88003d4d1ff8 ffffffff8129878b ffff88003bacb800
[    2.018195] Call Trace:
[    2.018195]  [<ffffffff81293625>] ? pci_bus_read_config_word+0x65/0x90
[    2.018195]  [<ffffffff81298746>] ? __pci_bus_find_cap_start+0x16/0x40
[    2.047186] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    2.047201] Switching to clocksource tsc
[    2.047203]  [<ffffffff8129878b>] ? pci_find_capability+0x1b/0x50
[    2.047203]  [<ffffffffa00ec09d>] ? ehci_pci_setup+0x9d/0x5a0 [ehci_pci]
[    2.047203]  [<ffffffffa00abc4d>] ? usb_add_hcd+0x1bd/0x660 [usbcore]
[    2.047203]  [<ffffffffa00ba9d3>] ? usb_hcd_pci_probe+0x363/0x410 [usbcore]
[    2.047203]  [<ffffffff8129c480>] ? pci_device_probe+0x60/0xa0
[    2.047203]  [<ffffffff81305e9a>] ? really_probe+0x5a/0x220
[    2.047203]  [<ffffffff81306121>] ? __driver_attach+0x81/0x90
[    2.047203]  [<ffffffff813060a0>] ? __device_attach+0x40/0x40
[    2.047203]  [<ffffffff81304193>] ? bus_for_each_dev+0x53/0x90
[    2.047203]  [<ffffffff81305638>] ? bus_add_driver+0x158/0x250
[    2.047203]  [<ffffffffa00ee000>] ? 0xffffffffa00edfff
[    2.047203]  [<ffffffff81306728>] ? driver_register+0x68/0x150
[    2.047203]  [<ffffffffa00ee000>] ? 0xffffffffa00edfff
[    2.047203]  [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140
[    2.047203]  [<ffffffff8108bda4>] ? load_module+0x1a04/0x2120
[    2.047203]  [<ffffffff81088f60>] ? store_uevent+0x40/0x40
[    2.047203]  [<ffffffff8108c551>] ? SYSC_init_module+0x91/0xc0
[    2.047203]  [<ffffffff814c2dc4>] ? system_call_fastpath+0x22/0x27
[    2.047203] Code: 88 ff ff 00 d8 44 3d 00 88 ff ff 70 63 69 30 30 30 30 3a 30 30 00 48 85 ed 74 0d 48 8d 7d 5c e8 47 9d 3a 00 85 c0 74 93 83 6b 58 <70> 63 69 30 30 30 30 3a 30 30 00 89 df e8 0e e1 ff ff 48 89 df 
[    2.047203] RIP  [<ffff88003dad4300>] 0xffff88003dad42ff
[    2.047203]  RSP <ffff880039ec7b78>
[    2.047203] CR2: ffff88003dad4300
[    2.047203] ---[ end trace 9ce56b15c18acfcb ]---
 ... [FAILED]
:: Loading module ohci-hcd[    2.078186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ... [  OK  ]
:: Loading module uhci-hcd[    2.084727] uhci_hcd: USB Universal Host Controller Interface driver

:

 

Any idea why it's failing?

 

Can anybody post a full working Proxmox config (/etc/pve/qemu-server/XXX.conf)?

 

Thanks in advance for your help.

 

Cheers.

-r

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

@IG-88 I didn't find any useful info in provided link but thank you anyway for trying to help.

 

Finally, after some research, I managed to get a similar config *working:-) (it was a little bit tricky).

 

1/ I guessed the kernel panic was due to some USB driver problem (related to my USB stick being loaded) so I simply changed the synoboot device from the USB stick to an emulated USB-disk (qemu storage disk).

2/ Also, in order to install/upgrade DSM (avoiding the infamous "error 13"), I had to set proper vid/pid in synoboot.img (grub.cfg), which in case of qemu storage disk is:

 

# QEMU STORAGE DISK
set vid=0x46f4
set pid=0x0001

 

So not exactly what I wanted (I'd have prefered to keep using USB stick but I couldn't find any qemu option to alter USB driver/properties when the device is being passed-thru from host to vm) but it works.

 

PD: I don't like e1000e trick (via args) either but it seems Proxmox won't support e1000e (according to Proxmox forum, although I don't have the exact link on hand).

 

Btw, this is my final config for proxmox VM:

 

Quote

# USB disk plus e1000e fix
args: -device 'nec-usb-xhci,id=usb-ctl-synoboot,addr=0x18' -drive 'id=usb-drv-synoboot,file=/var/lib/vz/images/100/synoboot_103b_ds3617_roman.img,if=none,format=raw' -device 'usb
-storage,id=usb-stor-synoboot,bootindex=1,removable=off,drive=usb-drv-synoboot' -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=00:11:32:73:68:AB,netdev=net0,bus=pci.
0,addr=0x12,id=net0
bios: seabios
boot: d
cores: 4
cpu: IvyBridge
hotplug: disk,network,usb
memory: 1024
name: NAS-Synology
numa: 0
onboot: 1
ostype: l26
sata0: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-**************,size=2930266584K
sata1: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-**************,size=2930266584K
sata2: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-**************size=2930266584K
sata3: /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-**************,size=3907018584K
scsihw: virtio-scsi-pci
serial0: socket
smbios1: uuid=9ba1da8f-1321-4a5e-8b00-c7020e51f8ee
sockets: 1
startup: order=1

 

For editing grub.cfg at synoboot.img, you can use any Linux shell and type:

 

Quote

# mkdir k
# mount -o offset=$((512*2048)) synoboot_103b_ds3617_roman.img k
# vi k/grub/grub.cfg

...

set vid=0x46f4
set pid=0x0001

...
# umount k

 

Done! :-)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...