Roodbaard Posted September 10, 2014 #1 Posted September 10, 2014 These are the release notes: Version : 5.0-4493 Update 5 (2014/09/10) Improvement Improve the stability of file copy to encrypted shared folders. Fixed Issues Fixed a vulnerability that could allow servers to accept unauthorized access. Anybody already tested if this can be installed successfully on XPenology? I'm already running update 4. Quote
Alex40 Posted September 10, 2014 #2 Posted September 10, 2014 (edited) I use NanoBoot 1- select the update and upload it and press OK, but DO NOT PRESS UPDATE NOW RIGHT AFTER 2- Connect user root with putty to the NAS 4- Write sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 and press enter 5- Write mv /autoupd@te.info1 /autoupd@te.info and press enter 6- In the GUI Synology panel press update now and wait to come back the Panel Synology Note: After restart I have 0 HDD´s... I turn OFF the NAS and turn ON. Now its working good and I have all HDD´s I dont try direct (Update Now) from Panel.. Edited September 10, 2014 by Guest Quote
yabba235 Posted September 10, 2014 #3 Posted September 10, 2014 These are the release notes: Version : 5.0-4493 Update 5 (2014/09/10) Improvement Improve the stability of file copy to encrypted shared folders. Fixed Issues Fixed a vulnerability that could allow servers to accept unauthorized access. Anybody already tested if this can be installed successfully on XPenology? I'm already running update 4. Look my post ( 64 ) viewtopic.php?f=2&t=3052&start=660 Update work very well Quote
yabba235 Posted September 10, 2014 #4 Posted September 10, 2014 1- Download in the GUI update 5 (don´t press update now)2- Connect user root with putty to the NAS 4- Write sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 and press enter 5- Write mv /autoupd@te.info1 /autoupd@te.info and press enter 6- In the GUI Synology panel press update now and wait Note: After restart I have 0 HDD´s... I turn OFF the NAS and turn ON. Now its working good and I have all HDD´s I dont try direct Update Now from Panel.. This step is not necessary in my case Quote
rimave Posted September 10, 2014 #5 Posted September 10, 2014 I followed the steps above in order to upgrade to 4493 update 5. It failed sofar. I have a HP Microserver 56L. Everything looked ok, because the system came back online but then it gave an error. All the disks were unmounted. But I could access the files by using file station. I reboted the system because of the unmounted error and the problem became worse. I can't access the disks anymore. I don't see them in my file station. So I created a task to reboot the system and after that I shutdown the Microserver. It came back online, but still no disks. I'm at work at the moment, but I'm gonna try a complete shutdown when I'm home. Unplug the power cord and start it up again. Hopefully that will work. Quote
martva Posted September 10, 2014 #6 Posted September 10, 2014 I followed the steps above in order to upgrade to 4493 update 5. It failed sofar.I have a HP Microserver 56L. Everything looked ok, because the system came back online but then it gave an error. All the disks were unmounted. But I could access the files by using file station. I reboted the system because of the unmounted error and the problem became worse. I can't access the disks anymore. I don't see them in my file station. So I created a task to reboot the system and after that I shutdown the Microserver. It came back online, but still no disks. I'm at work at the moment, but I'm gonna try a complete shutdown when I'm home. Unplug the power cord and start it up again. Hopefully that will work. What bootloader are you using. I'm still on Nanoboot 5.0.2.3 and it is booting 5.0 4493-4. Just curious what bootloader you are using. Quote
Poechi Posted September 10, 2014 #7 Posted September 10, 2014 (edited) - Edited July 10, 2015 by Guest Quote
Bonobo Posted September 10, 2014 #8 Posted September 10, 2014 1- Download in the GUI update 5 (don´t press update now)2- Connect user root with putty to the NAS 4- Write sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 and press enter 5- Write mv /autoupd@te.info1 /autoupd@te.info and press enter 6- In the GUI Synology panel press update now and wait Note: After restart I have 0 HDD´s... I turn OFF the NAS and turn ON. Now its working good and I have all HDD´s I dont try direct Update Now from Panel.. The part in step 1 could be confusing to some people. You need to select the update and upload it and press OK, but DO NOT PRESS UPDATE NOW RIGHT AFTER. Instead run the commands and then press the button. This had me going for a while. Quote
Guest MPaladin Posted September 10, 2014 #9 Posted September 10, 2014 1- Download in the GUI update 5 (don´t press update now)2- Connect user root with putty to the NAS 4- Write sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 and press enter 5- Write mv /autoupd@te.info1 /autoupd@te.info and press enter 6- In the GUI Synology panel press update now and wait Note: After restart I have 0 HDD´s... I turn OFF the NAS and turn ON. Now its working good and I have all HDD´s I dont try direct Update Now from Panel.. This step is not necessary in my case This step was necessary twice for me, I had a narrow escape there Quote
Panja Posted September 10, 2014 #10 Posted September 10, 2014 I have updated to 4493 update 5. Same problems that I have when I updated to update 4. Install went well. Everything works. But after a reboot my volume is unmounted. Reboot again. Volume is back. But... Web Station is disabled and all of the user accounts in Photo Station are reset e.g. all user accounts do not have permission anymore to view (photo) folders. Also Spotweb needs to be enabled again. (probably because Web Station was disabled at boot). See my post about update 4: viewtopic.php?f=2&t=3802&start=10#p22962 Quote
rimave Posted September 10, 2014 #11 Posted September 10, 2014 I shut the HP down and I'm @work, so I cannot check my Nanoboot version at the moment. Quote
Alex40 Posted September 10, 2014 #12 Posted September 10, 2014 1- Download in the GUI update 5 (don´t press update now)2- Connect user root with putty to the NAS 4- Write sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 and press enter 5- Write mv /autoupd@te.info1 /autoupd@te.info and press enter 6- In the GUI Synology panel press update now and wait Note: After restart I have 0 HDD´s... I turn OFF the NAS and turn ON. Now its working good and I have all HDD´s I dont try direct Update Now from Panel.. The part in step 1 could be confusing to some people. You need to select the update and upload it and press OK, but DO NOT PRESS UPDATE NOW RIGHT AFTER. Instead run the commands and then press the button. This had me going for a while. Thanks and sorry my English.. I replace text Quote
Poechi Posted September 10, 2014 #13 Posted September 10, 2014 (edited) - Edited July 10, 2015 by Guest Quote
martva Posted September 10, 2014 #14 Posted September 10, 2014 And is anything visible during boot? Like when booting after update 4? Or in the logging? Quote
R0KH Posted September 10, 2014 #15 Posted September 10, 2014 Here are my observations: Installed it on VM in Hyper-V - Installed the update with the 'SED' method. - 1st reboot, volume is present, hdd not. - 2st reboot, volume and disk NOT present. - Shutdown machine, start, volume and disk are present. Yes, I had exactly the same and it's actually quite scary when you see that your volumes are unmounted... Fortunately everything seems to be working normally at the moment again. Quote
Poechi Posted September 10, 2014 #16 Posted September 10, 2014 (edited) - Edited July 10, 2015 by Guest Quote
rimave Posted September 10, 2014 #17 Posted September 10, 2014 I have re-installed Xpenology, because the HP 54L was unreachable. There was no other way. I've got all my data back now and I will reinstall update 4 again. Quote
manfriday Posted September 11, 2014 #18 Posted September 11, 2014 (edited) -downloaded update 5 -stop at Update now -run script to execute commands -continue with update 8mins in system available but msg says volumes are outside of operating temps -reboot (stuck at Starting Services in DSM assistant for a long time) System up and volumes not visible -shutdown -come back tomorrow ....tomorrow -restart , all volumes visible, permissions screwed -fix permissions -Done! Edited September 11, 2014 by Guest Quote
CtrlAltDel Posted September 11, 2014 #19 Posted September 11, 2014 System N40L. No Volumes and USB eject error. Fix that worked for me was to manually eject the USB and restart the N40L. Volumes restored. Permissions remain screwed. Quote
fjf Posted September 11, 2014 #20 Posted September 11, 2014 Followed Poechi's guide, everything working as described there after 2 reboots and 1 shutdown Quote
pmcnano Posted September 11, 2014 #21 Posted September 11, 2014 Well I have restarted around 7 times, and shutdown 3. My disks are not recognized yet. HP Proliant Microserver Gen8 . Any ideas? Quote
Guest Posted September 11, 2014 #22 Posted September 11, 2014 I followed Roodbaard's procedure on my N54L and got the same errors as Alex40 and rimave. Fortunately after two reboots all appears to be OK - apart from screwed folder permissions - definitely "squeaky bum" time for a while Quote
pmcnano Posted September 12, 2014 #23 Posted September 12, 2014 Well just so you know, my Proliant Gen8 never recognized the disks anymore. I downgraded and updated again and everything is working fine again! Quote
alan.ferrier Posted September 12, 2014 #24 Posted September 12, 2014 Applied the update, needed a couple of reboots to find the drives and we're mostly in business. However, I can now neither mount existing, or create new encryted shares. Web interface just states "The operation failed. Login to DSM and try again". Log file entries below: Sep 11 20:46:05 DiskStation entry.cgi_SYNO.Core.Share.Crypto[1].decrypt[20106]: enc_writebio_disable.c:68 Failed to modify [/bin/echo 0 > /sys/block/md4/md/writebio] Sep 11 20:46:05 DiskStation entry.cgi_SYNO.Core.Share.Crypto[1].decrypt[20106]: enc_share_mount.c:217 Decryption share failed. Failed to Disabel WriteBio. Sep 11 20:46:14 DiskStation entry.cgi_SYNO.Core.Share.Crypto[1].decrypt[20135]: enc_writebio_disable.c:68 Failed to modify [/bin/echo 0 > /sys/block/md4/md/writebio] Sep 11 20:46:14 DiskStation entry.cgi_SYNO.Core.Share.Crypto[1].decrypt[20135]: enc_share_mount.c:217 Decryption share failed. Failed to Disabel WriteBio. It would appear the there is no /sys/block/md4/md/writebio entry to update: DiskStation> ls -l /sys/block/md4/md -rw-r--r-- 1 root root 4096 Sep 11 20:45 active -rw-r--r-- 1 root root 4096 Sep 11 20:49 array_size -rw-r--r-- 1 root root 4096 Sep 11 20:49 array_state -rw-r--r-- 1 root root 4096 Sep 11 20:49 auto_remap drwxr-xr-x 2 root root 0 Sep 11 20:49 bitmap --w------- 1 root root 4096 Sep 11 20:49 bitmap_set_bits -rw-r--r-- 1 root root 4096 Sep 11 20:49 chunk_size -rw-r--r-- 1 root root 4096 Sep 11 20:42 component_size -r--r--r-- 1 root root 4096 Sep 11 20:49 degraded drwxr-xr-x 2 root root 0 Sep 11 20:42 dev-sda7 drwxr-xr-x 2 root root 0 Sep 11 20:42 dev-sdb7 drwxr-xr-x 2 root root 0 Sep 11 20:42 dev-sdc7 drwxr-xr-x 2 root root 0 Sep 11 20:42 dev-sdd7 drwxr-xr-x 2 root root 0 Sep 11 20:42 dev-sdf7 -rw-r--r-- 1 root root 4096 Sep 11 20:49 layout -rw-r--r-- 1 root root 4096 Sep 11 20:49 level -rw-r--r-- 1 root root 4096 Sep 11 20:49 max_read_errors -rw-r--r-- 1 root root 4096 Sep 11 20:49 metadata_version -r--r--r-- 1 root root 4096 Sep 11 20:49 mismatch_cnt --w------- 1 root root 4096 Sep 11 20:49 new_dev -rw-r--r-- 1 root root 4096 Sep 11 20:49 preread_bypass_threshold -rw-r--r-- 1 root root 4096 Sep 11 20:49 raid_disks lrwxrwxrwx 1 root root 0 Sep 11 20:49 rd0 -> dev-sdf7 lrwxrwxrwx 1 root root 0 Sep 11 20:49 rd1 -> dev-sdb7 lrwxrwxrwx 1 root root 0 Sep 11 20:49 rd2 -> dev-sdd7 lrwxrwxrwx 1 root root 0 Sep 11 20:49 rd3 -> dev-sdc7 lrwxrwxrwx 1 root root 0 Sep 11 20:49 rd4 -> dev-sda7 -rw-r--r-- 1 root root 4096 Sep 11 20:49 reshape_position -rw-r--r-- 1 root root 4096 Sep 11 20:49 resync_start -rw-r--r-- 1 root root 4096 Sep 11 20:49 safe_mode_delay -r--r--r-- 1 root root 4096 Sep 11 20:49 stripe_cache_active -rw-r--r-- 1 root root 4096 Sep 11 20:43 stripe_cache_size -rw-r--r-- 1 root root 4096 Sep 11 20:49 suspend_hi -rw-r--r-- 1 root root 4096 Sep 11 20:49 suspend_lo -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_action -r--r--r-- 1 root root 4096 Sep 11 20:49 sync_completed -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_force_parallel -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_max -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_min -r--r--r-- 1 root root 4096 Sep 11 20:49 sync_speed -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_speed_max -rw-r--r-- 1 root root 4096 Sep 11 20:49 sync_speed_min Any thoughts? Alan Quote
heyudude Posted September 12, 2014 #25 Posted September 12, 2014 N54L system, latest xpenology: Did the update to Update 5, all went fine. As expected, no disk, and volume error. Did a reboot twice, power off, power on. But... no disks and no volume visible. I can access the GUI and shell however. Any tips what to do now? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.