saud

Compatible drivers with 1.04b bootloader

Recommended Posts

I am using juns 1.04b loader 918+

 

I am using an MSI z170a motherboard which works great with the bootloader! it even works with the e2400 NIC (which usually doesnt work on Linux).

 

Since everything seems to be working great, I'd like to invest in a SAS PCI card since the one I have doesnt work (Marvell 88SE9485, AOC-SAS2LP-MV8) and I'd like to get a 10g NIC.

 

 

Is there a way to see which NIC's and SAS cards are compatible (work out of the box) on that 1.04b loader?

Share this post


Link to post
Share on other sites
55 minutes ago, saud said:

it even works with the e2400 NIC

alx.ko would be the driver you need for this, 918+ uses a newer kernel (4.4.59) so it might not work with 3615/17 (kernel) 3.10.105

 

57 minutes ago, saud said:

Since everything seems to be working great, I'd like to invest in a SAS PCI card since the one I have doesnt work (Marvell 88SE9485, AOC-SAS2LP-MV8)

the driver would be mvsas.ko - jun does not have this driver in his default extra.lzma but its part of my extension, you can try to boot with it

https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/

 

if you still looking for a replacement then i'd suggest using a ahci 4 or 8 port sata ahci card, ahci support is build into dsm kernel, no extra drivers needed and synology cant remove it as there own hardware uses ahci

i wrote about 8-ports sata cards here:

https://xpenology.com/forum/topic/19854-sata-controllers-not-recognized/?do=findComment&comment=122709

 

Share this post


Link to post
Share on other sites

@IG-88 thank you so much for replying! I actually have tried your driver on two motherboards now (z170i which has an intel NIC and now the z170a which has the e2400 NIC), everything works with the extra's from jun but when I reboot using your drivers the NIC or at least something stops working as I am no longer able to get back into DSM.

 

Newbie question, but am I suppose to do anything beyond replacing the extra.lzma and extra2.lzma on the usb?

 

again i am using the 918 1.04b loader

 

also loading the driver manually (mvsas.ko) using insmod shows a symbol error

 

insmod: ERROR: could not insert module mvsas.ko: Unknown symbol in module

 

and here is the dmesg

 

[  128.903208] mvsas: Unknown symbol sas_domain_attach_transport (err 0)
[  128.903231] mvsas: Unknown symbol sas_slave_configure (err 0)
[  128.903241] mvsas: Unknown symbol sas_free_task (err 0)
[  128.903251] mvsas: Unknown symbol sas_bios_param (err 0)
[  128.903263] mvsas: Unknown symbol sas_queuecommand (err 0)
[  128.903269] mvsas: Unknown symbol sas_eh_device_reset_handler (err 0)
[  128.903275] mvsas: Unknown symbol sas_target_destroy (err 0)
[  128.903284] mvsas: Unknown symbol sas_alloc_slow_task (err 0)
[  128.903290] mvsas: Unknown symbol sas_register_ha (err 0)
[  128.903298] mvsas: Unknown symbol sas_unregister_ha (err 0)
[  128.903307] mvsas: Unknown symbol sas_ioctl (err 0)
[  128.903314] mvsas: Unknown symbol sas_eh_bus_reset_handler (err 0)
[  128.903320] mvsas: Unknown symbol sas_target_alloc (err 0)
[  128.903328] mvsas: Unknown symbol sas_get_local_phy (err 0)
[  128.903335] mvsas: Unknown symbol sas_phy_reset (err 0)
[  128.903343] mvsas: Unknown symbol sas_ssp_task_response (err 0)
[  128.903350] mvsas: Unknown symbol sas_drain_work (err 0)
[  128.903364] mvsas: Unknown symbol sas_change_queue_depth (err 0)

 

Edited by saud

Share this post


Link to post
Share on other sites
On 11/25/2019 at 12:58 AM, saud said:

sas_domain_attach_transport

that and other things are part of "libsas.ko", that needs to be loaded before mvsas.ko (-> rc.modules in extra.lzma)

if you load it manually try this sequence

scsi_transport_spi.ko

scsi_transport_sas.ko

libsas.ko

raid_class.ko

mvsas.ko

 

Share this post


Link to post
Share on other sites

@IG-88 I tried to manually loading the drivers but it unfortunately crashed the interface as soon as i try to load mvsas.ko. so I tried injecting them manually to the extra.lzma but then it wouldnt boot 😕

 

it seems to work (see dmesg below) but it requires to be loaded at startup 

edit: I was able to get the modules to load on startup using a script in /usr/local/etc/rc.d/ and it actually works for a few seconds, it finds the drives (according to dmesg) but shortly after it just crashes in a continues loop :(

 

i've attached the extra.lzma that iam using

 

are there any alternative marvell drivers? or perhaps a way to get it to load on startup in another way?

extra.lzma

 

[  343.334065] mvsas 0000:02:00.0: mvsas: driver version 0.8.16
[  343.334455] mvsas 0000:02:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
[  349.629993] scsi host7: mvsas
[  349.630462] sas: phy-7:6 added to port-7:0, phy_mask:0x4 ( 600000000000000)
[  349.630472] sas: DOING DISCOVERY on port 0, pid:3676
[  349.630473] sas: DONE DISCOVERY on port 0, pid:3676, result:0
[  349.630477] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[  349.630492] sas: ata0: end_device-7:0: dev error handler
[  349.787219] ata7.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30010, max UDMA/133
[  349.787221] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[  349.787222] ata7.00: SN:S313J9FD921575
[  349.793345] ata7.00: configured for UDMA/133
[  349.793352] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[  349.799689] scsi 7:0:0:0: Direct-Access     ST500LM0 HN-M500MBB               0010 PQ: 0 ANSI: 5
[  349.799881] sd 7:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[  349.799883] sd 7:0:0:0: [sdh] 4096-byte physical blocks
[  349.799886] sd 7:0:0:0: Attached scsi generic sg5 type 0
[  349.799937] sd 7:0:0:0: [sdh] Write Protect is off
[  349.799939] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[  349.799958] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  350.124472]  sdh: sdh1 sdh3 sdh5 sdh7 sdh9 sdh10 sdh11 sdh12 sdh13 sdh17 sdh19 sdh25 sdh27 sdh29 sdh31
[  350.125034] sd 7:0:0:0: [sdh] Attached SCSI disk
[  351.826471] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[  351.826497] sas: ata0: end_device-7:0: dev error handler
[  351.839387] ata7.00: configured for UDMA/133
[  351.839390] ata7: EH complete
[  351.839394] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[  353.329669] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[  353.329672] sas: ata0: end_device-7:0: cmd error handler
[  353.329712] sas: ata0: end_device-7:0: dev error handler
[  353.329724] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
[  353.339662] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[  353.339663] sas: ata0: end_device-7:0: cmd error handler
[  353.339667] sas: ata0: end_device-7:0: dev error handler
[  353.339669] ata7.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x0
[  353.340013] BUG: unable to handle kernel paging request at 0000000000003fb8
[  353.340369] IP: [<ffffffff813da665>] syno_libata_index_get+0x25/0x90
[  353.340689] PGD 0 
[  353.340802] Oops: 0000 [#1] PREEMPT SMP 
[  353.341025] Modules linked in: mvsas(E) libsas(E) vhost_scsi(O) vhost(O) xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) evdev(E) ax88179_178a(E) usbnet tg3(E)
[  353.344949]  cnic(E) bnx2(E) vmxnet3(E) pcnet32(E) e1000(E) sfc(E) netxen_nic(E) qlge(E) qlcnic(E) qla3xxx(E) sky2(E) skge(E) jme(E) uio(E) alx(E) atl1c(E) atl1e(E) atl1(E) libphy(E) mii(E) exfat(O) btrfs i915(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac bnx2x(E) mlx5_core(E) mlx4_en(E) mlx4_core(E) mlx_compat(OE) atlantic(OE) r8168(OE) tn40xx(OE) i40e(E) ixgbe(E) be2net(E) igb(E) i2c_algo_bit e1000e(E) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave
[  353.348972]  cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t(E) crc_ccitt(E) quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common imwz(OE) [last unloaded: apollolake_synobios]
[  353.351413] CPU: 2 PID: 1003 Comm: kworker/2:1 Tainted: P           OE   4.4.59+ #24922
[  353.351801] Hardware name: MSI MS-7977/Z170A GAMING M5 (MS-7977), BIOS 1.I0 06/26/2018
[  353.352184] Workqueue: events SendSataErrEvent
[  353.352411] task: ffff880652ad8240 ti: ffff88064eacc000 task.ti: ffff88064eacc000
[  353.352775] RIP: 0010:[<ffffffff813da665>]  [<ffffffff813da665>] syno_libata_index_get+0x25/0x90
[  353.353209] RSP: 0018:ffff88064eacfdd0  EFLAGS: 00010246
[  353.353469] RAX: 0000000000000080 RBX: ffff880639382418 RCX: 0000000000000000
[  353.353815] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8806481ef800
[  353.354162] RBP: ffff88064eacfdf8 R08: ffff88064eacc000 R09: 0000000000000002
[  353.354509] R10: 0000000000062238 R11: 0000000000000001 R12: 0000000000000000
[  353.354854] R13: 0000000000000007 R14: 0000000000000000 R15: ffff88066ec93bc0
[  353.355200] FS:  0000000000000000(0000) GS:ffff88066ec80000(0000) knlGS:0000000000000000
[  353.355592] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  353.355873] CR2: 0000000000003fb8 CR3: 000000000180a000 CR4: 00000000003606f0
[  353.356219] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  353.356567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  353.356913] Stack:
[  353.357016]  ffff880639382418 ffff880639380000 0000000000000000 ffffe8ffffc80f00
[  353.357408]  ffff88066ec93bc0 ffff88064eacfe18 ffffffff813dd020 ffff88064ea8f580
[  353.357801]  ffff880639382418 ffff88064eacfe60 ffffffff8105ed02 ffff88066ec93bc0
[  353.358194] Call Trace:
[  353.358320]  [<ffffffff813dd020>] SendSataErrEvent+0x20/0x50
[  353.358597]  [<ffffffff8105ed02>] process_one_work+0x142/0x360
[  353.358882]  [<ffffffff8105f3ca>] worker_thread+0x4a/0x450
[  353.359152]  [<ffffffff8156656f>] ? __schedule+0x2af/0x730
[  353.359422]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.359707]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.359992]  [<ffffffff81064146>] kthread+0xc6/0xe0
[  353.360232]  [<ffffffff81566535>] ? __schedule+0x275/0x730
[  353.360501]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.360818]  [<ffffffff8156ab12>] ret_from_fork+0x52/0x80
[  353.361083]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.361400] Code: 84 00 00 00 00 00 55 80 3d 68 e9 5a 00 00 48 89 e5 41 57 41 56 44 8d 36 41 55 41 54 53 4c 8b a7 b0 07 00 00 44 8b af 50 01 00 00 <4d> 8b bc 24 b8 3f 00 00 75 3c 44 89 ef e8 f9 d0 f0 ff 8d 18 49 
[  353.362853] RIP  [<ffffffff813da665>] syno_libata_index_get+0x25/0x90
[  353.363175]  RSP <ffff88064eacfdd0>
[  353.363348] CR2: 0000000000003fb8
[  353.363514] ---[ end trace 5b1726a8fef720b3 ]---
[  353.363742] ------------[ cut here ]------------
[  353.363971] WARNING: CPU: 2 PID: 1003 at kernel/softirq.c:150 __local_bh_enable_ip+0x65/0x90()
[  353.364387] Modules linked in: mvsas(E) libsas(E) vhost_scsi(O) vhost(O) xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) evdev(E) ax88179_178a(E) usbnet tg3(E)
[  353.368302]  cnic(E) bnx2(E) vmxnet3(E) pcnet32(E) e1000(E) sfc(E) netxen_nic(E) qlge(E) qlcnic(E) qla3xxx(E) sky2(E) skge(E) jme(E) uio(E) alx(E) atl1c(E) atl1e(E) atl1(E) libphy(E) mii(E) exfat(O) btrfs i915(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac bnx2x(E) mlx5_core(E) mlx4_en(E) mlx4_core(E) mlx_compat(OE) atlantic(OE) r8168(OE) tn40xx(OE) i40e(E) ixgbe(E) be2net(E) igb(E) i2c_algo_bit e1000e(E) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave
[  353.372314]  cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t(E) crc_ccitt(E) quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common imwz(OE) [last unloaded: apollolake_synobios]
[  353.374753] CPU: 2 PID: 1003 Comm: kworker/2:1 Tainted: P      D    OE   4.4.59+ #24922
[  353.375142] Hardware name: MSI MS-7977/Z170A GAMING M5 (MS-7977), BIOS 1.I0 06/26/2018
[  353.375530]  0000000000000000 ffff88064eacfad8 ffffffff812b96fd 0000000000000000
[  353.375921]  ffffffff81722924 ffff88064eacfb10 ffffffff8104917d 0000000000000201
[  353.376315]  ffff880652ad8240 0000000000000046 ffff880652ad8240 0000000000003fb8
[  353.376708] Call Trace:
[  353.376833]  [<ffffffff812b96fd>] dump_stack+0x4d/0x70
[  353.377086]  [<ffffffff8104917d>] warn_slowpath_common+0x7d/0xc0
[  353.377381]  [<ffffffff81049276>] warn_slowpath_null+0x16/0x20
[  353.377666]  [<ffffffff8104c9e5>] __local_bh_enable_ip+0x65/0x90
[  353.377961]  [<ffffffff8156a275>] _raw_spin_unlock_bh+0x15/0x20
[  353.378252]  [<ffffffff810c464b>] cgroup_exit+0x4b/0xa0
[  353.378508]  [<ffffffff8104bacd>] do_exit+0x36d/0xab0
[  353.378756]  [<ffffffff810072a4>] oops_end+0x84/0xc0
[  353.379000]  [<ffffffff8103b44b>] no_context+0xfb/0x2b0
[  353.379256]  [<ffffffff81296d46>] ? freed_request+0x46/0x70
[  353.379530]  [<ffffffff8103b670>] __bad_area_nosemaphore+0x70/0x1f0
[  353.379836]  [<ffffffff8103b7fe>] bad_area_nosemaphore+0xe/0x10
[  353.380126]  [<ffffffff8103bb96>] __do_page_fault+0x1c6/0x390
[  353.380407]  [<ffffffff813ab563>] ? scsi_execute_req_flags+0xa3/0xf0
[  353.380718]  [<ffffffff8103bd9c>] do_page_fault+0xc/0x10
[  353.380980]  [<ffffffff8156bf02>] page_fault+0x22/0x30
[  353.381232]  [<ffffffff813da665>] ? syno_libata_index_get+0x25/0x90
[  353.381537]  [<ffffffff813dd020>] SendSataErrEvent+0x20/0x50
[  353.381815]  [<ffffffff8105ed02>] process_one_work+0x142/0x360
[  353.382101]  [<ffffffff8105f3ca>] worker_thread+0x4a/0x450
[  353.382369]  [<ffffffff8156656f>] ? __schedule+0x2af/0x730
[  353.382639]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.382924]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.383209]  [<ffffffff81064146>] kthread+0xc6/0xe0
[  353.383450]  [<ffffffff81566535>] ? __schedule+0x275/0x730
[  353.383718]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.384036]  [<ffffffff8156ab12>] ret_from_fork+0x52/0x80
[  353.384301]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.384620] ---[ end trace 5b1726a8fef720b4 ]---
[  353.384857] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
[  353.384869] BUG: unable to handle kernel paging request at ffffffffffffffd8
[  353.384870] IP: [<ffffffff810646ab>] kthread_data+0xb/0x20
[  353.384870] PGD 180d067 PUD 180f067 PMD 0 
[  353.384871] Oops: 0000 [#2] PREEMPT SMP 
[  353.384880] Modules linked in: mvsas(E) libsas(E) vhost_scsi(O) vhost(O) xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) evdev(E) ax88179_178a(E) usbnet tg3(E)
[  353.384906]  cnic(E) bnx2(E) vmxnet3(E) pcnet32(E) e1000(E) sfc(E) netxen_nic(E) qlge(E) qlcnic(E) qla3xxx(E) sky2(E) skge(E) jme(E) uio(E) alx(E) atl1c(E) atl1e(E) atl1(E) libphy(E) mii(E) exfat(O) btrfs i915(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac bnx2x(E) mlx5_core(E) mlx4_en(E) mlx4_core(E) mlx_compat(OE) atlantic(OE) r8168(OE) tn40xx(OE) i40e(E) ixgbe(E) be2net(E) igb(E) i2c_algo_bit e1000e(E) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave
[  353.384920]  cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t(E) crc_ccitt(E) quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common imwz(OE) [last unloaded: apollolake_synobios]
[  353.384920] CPU: 2 PID: 1003 Comm: kworker/2:1 Tainted: P      D W  OE   4.4.59+ #24922
[  353.384921] Hardware name: MSI MS-7977/Z170A GAMING M5 (MS-7977), BIOS 1.I0 06/26/2018
[  353.384924] task: ffff880652ad8240 ti: ffff88064eacc000 task.ti: ffff88064eacc000
[  353.384925] RIP: 0010:[<ffffffff810646ab>]  [<ffffffff810646ab>] kthread_data+0xb/0x20
[  353.384926] RSP: 0018:ffff88064eacfaf0  EFLAGS: 00010002
[  353.384926] RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffffffff81989840
[  353.384926] RDX: 0000000000000002 RSI: 0000000000000002 RDI: ffff880652ad8240
[  353.384927] RBP: ffff88064eacfaf0 R08: 0000000000000175 R09: 0000000000000001
[  353.384927] R10: 000000000000d0b2 R11: ffffffff819ed218 R12: 0000000000014340
[  353.384927] R13: ffff88066ec94340 R14: ffff880652ad8778 R15: ffff880652ad8240
[  353.384928] FS:  0000000000000000(0000) GS:ffff88066ec80000(0000) knlGS:0000000000000000
[  353.384928] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  353.384928] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000003606f0
[  353.384929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  353.384929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  353.384929] Stack:
[  353.384930]  ffff88064eacfb08 ffffffff8105f84c ffff88066ec94340 ffff88064eacfb50
[  353.384930]  ffffffff81566842 000000028129d06d ffff880652ad8240 ffff88064ead0000
[  353.384931]  ffff88064eacfba0 ffff88065321ee00 ffff88064eacf740 0000000000003fb8
[  353.384931] Call Trace:
[  353.384932]  [<ffffffff8105f84c>] wq_worker_sleeping+0xc/0x90
[  353.384933]  [<ffffffff81566842>] __schedule+0x582/0x730
[  353.384934]  [<ffffffff81566a27>] schedule+0x37/0x80
[  353.384934]  [<ffffffff8104be39>] do_exit+0x6d9/0xab0
[  353.384935]  [<ffffffff810072a4>] oops_end+0x84/0xc0
[  353.384936]  [<ffffffff8103b44b>] no_context+0xfb/0x2b0
[  353.384937]  [<ffffffff81296d46>] ? freed_request+0x46/0x70
[  353.384938]  [<ffffffff8103b670>] __bad_area_nosemaphore+0x70/0x1f0
[  353.384939]  [<ffffffff8103b7fe>] bad_area_nosemaphore+0xe/0x10
[  353.384939]  [<ffffffff8103bb96>] __do_page_fault+0x1c6/0x390
[  353.384940]  [<ffffffff813ab563>] ? scsi_execute_req_flags+0xa3/0xf0
[  353.384941]  [<ffffffff8103bd9c>] do_page_fault+0xc/0x10
[  353.384942]  [<ffffffff8156bf02>] page_fault+0x22/0x30
[  353.384942]  [<ffffffff813da665>] ? syno_libata_index_get+0x25/0x90
[  353.384943]  [<ffffffff813dd020>] SendSataErrEvent+0x20/0x50
[  353.384944]  [<ffffffff8105ed02>] process_one_work+0x142/0x360
[  353.384945]  [<ffffffff8105f3ca>] worker_thread+0x4a/0x450
[  353.384946]  [<ffffffff8156656f>] ? __schedule+0x2af/0x730
[  353.384947]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.384948]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.384948]  [<ffffffff81064146>] kthread+0xc6/0xe0
[  353.384949]  [<ffffffff81566535>] ? __schedule+0x275/0x730
[  353.384950]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.384950]  [<ffffffff8156ab12>] ret_from_fork+0x52/0x80
[  353.384951]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.384958] Code: 48 29 c2 48 89 e5 48 89 d6 ba 02 00 00 00 e8 4d fe ff ff 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 d8 04 00 00 55 48 89 e5 <48> 8b 40 d8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 
[  353.384959] RIP  [<ffffffff810646ab>] kthread_data+0xb/0x20
[  353.384959]  RSP <ffff88064eacfaf0>
[  353.384959] CR2: ffffffffffffffd8
[  353.384959] ---[ end trace 5b1726a8fef720b5 ]---
[  353.384960] Fixing recursive fault but reboot is needed!
[  353.384960] BUG: scheduling while atomic: kworker/2:1/1003/0x00000003
[  353.384968] Modules linked in: mvsas(E) libsas(E) vhost_scsi(O) vhost(O) xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) evdev(E) ax88179_178a(E) usbnet tg3(E)
[  353.384978]  cnic(E) bnx2(E) vmxnet3(E) pcnet32(E) e1000(E) sfc(E) netxen_nic(E) qlge(E) qlcnic(E) qla3xxx(E) sky2(E) skge(E) jme(E) uio(E) alx(E) atl1c(E) atl1e(E) atl1(E) libphy(E) mii(E) exfat(O) btrfs i915(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac bnx2x(E) mlx5_core(E) mlx4_en(E) mlx4_core(E) mlx_compat(OE) atlantic(OE) r8168(OE) tn40xx(OE) i40e(E) ixgbe(E) be2net(E) igb(E) i2c_algo_bit e1000e(E) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave
[  353.384983]  cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t(E) crc_ccitt(E) quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common imwz(OE) [last unloaded: apollolake_synobios]
[  353.384983] CPU: 2 PID: 1003 Comm: kworker/2:1 Tainted: P      D W  OE   4.4.59+ #24922
[  353.384983] Hardware name: MSI MS-7977/Z170A GAMING M5 (MS-7977), BIOS 1.I0 06/26/2018
[  353.384988]  0000000000000000 ffff88064eacf818 ffffffff812b96fd ffff88066ec94340
[  353.384988]  0000000000014340 ffff88064eacf828 ffffffff810684b5 ffff88064eacf870
[  353.384989]  ffffffff815666d9 0000000200000008 ffff880652ad8240 ffff88064ead0000
[  353.384989] Call Trace:
[  353.384990]  [<ffffffff812b96fd>] dump_stack+0x4d/0x70
[  353.384991]  [<ffffffff810684b5>] __schedule_bug+0x45/0x60
[  353.384991]  [<ffffffff815666d9>] __schedule+0x419/0x730
[  353.384992]  [<ffffffff81566a27>] schedule+0x37/0x80
[  353.384993]  [<ffffffff8104bfc9>] do_exit+0x869/0xab0
[  353.384993]  [<ffffffff810072a4>] oops_end+0x84/0xc0
[  353.384994]  [<ffffffff8103b44b>] no_context+0xfb/0x2b0
[  353.384995]  [<ffffffff81178fa6>] ? fsnotify_destroy_marks+0x76/0x80
[  353.384996]  [<ffffffff8103b670>] __bad_area_nosemaphore+0x70/0x1f0
[  353.384997]  [<ffffffff8103b7fe>] bad_area_nosemaphore+0xe/0x10
[  353.384998]  [<ffffffff8103bb96>] __do_page_fault+0x1c6/0x390
[  353.384999]  [<ffffffff8103bd9c>] do_page_fault+0xc/0x10
[  353.384999]  [<ffffffff8156bf02>] page_fault+0x22/0x30
[  353.385000]  [<ffffffff810646ab>] ? kthread_data+0xb/0x20
[  353.385001]  [<ffffffff8105f84c>] wq_worker_sleeping+0xc/0x90
[  353.385002]  [<ffffffff81566842>] __schedule+0x582/0x730
[  353.385002]  [<ffffffff81566a27>] schedule+0x37/0x80
[  353.385003]  [<ffffffff8104be39>] do_exit+0x6d9/0xab0
[  353.385004]  [<ffffffff810072a4>] oops_end+0x84/0xc0
[  353.385004]  [<ffffffff8103b44b>] no_context+0xfb/0x2b0
[  353.385005]  [<ffffffff81296d46>] ? freed_request+0x46/0x70
[  353.385006]  [<ffffffff8103b670>] __bad_area_nosemaphore+0x70/0x1f0
[  353.385007]  [<ffffffff8103b7fe>] bad_area_nosemaphore+0xe/0x10
[  353.385008]  [<ffffffff8103bb96>] __do_page_fault+0x1c6/0x390
[  353.385008]  [<ffffffff813ab563>] ? scsi_execute_req_flags+0xa3/0xf0
[  353.385009]  [<ffffffff8103bd9c>] do_page_fault+0xc/0x10
[  353.385010]  [<ffffffff8156bf02>] page_fault+0x22/0x30
[  353.385010]  [<ffffffff813da665>] ? syno_libata_index_get+0x25/0x90
[  353.385011]  [<ffffffff813dd020>] SendSataErrEvent+0x20/0x50
[  353.385012]  [<ffffffff8105ed02>] process_one_work+0x142/0x360
[  353.385013]  [<ffffffff8105f3ca>] worker_thread+0x4a/0x450
[  353.385014]  [<ffffffff8156656f>] ? __schedule+0x2af/0x730
[  353.385015]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.385015]  [<ffffffff8105f380>] ? max_active_store+0x60/0x60
[  353.385016]  [<ffffffff81064146>] kthread+0xc6/0xe0
[  353.385017]  [<ffffffff81566535>] ? __schedule+0x275/0x730
[  353.385017]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
[  353.385018]  [<ffffffff8156ab12>] ret_from_fork+0x52/0x80
[  353.385018]  [<ffffffff81064080>] ? kthread_create_on_node+0x180/0x180
ash-4.3# 

 

Edited by saud

Share this post


Link to post
Share on other sites

if you can wait then you can test again when i redo then 918+ in december and if you can't then go ahci

when i see the problems with sas/scsi with 1.03b/6.2.2 3615/17 then i think there might be a change in the kernel source (we don't have) preventing any sas/scsi based drivers beside the ones coming with dsm, if that's true then i wont be able to get working drivers for 918+

i will know in about 2 weeks, i have a lsi 9211-8i controller using mpt2sas so i can test drivers

 

if you want to prevent any certainties then buy a ahci controller, that's sure to work with 918+ 6.2.2

 

Share this post


Link to post
Share on other sites
36 minutes ago, IG-88 said:

if you can wait then you can test again when i redo then 918+ in december and if you can't then go ahci

when i see the problems with sas/scsi with 1.03b/6.2.2 3615/17 then i think there might be a change in the kernel source (we don't have) preventing any sas/scsi based drivers beside the ones coming with dsm, if that's true then i wont be able to get working drivers for 918+

i will know in about 2 weeks, i have a lsi 9211-8i controller using mpt2sas so i can test drivers

 

if you want to prevent any certainties then buy a ahci controller, that's sure to work with 918+ 6.2.2

 

 

@IG-88 my dude, thank you for everything, i cant thank you enough for even replying. please . take your time.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.