Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-3
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Supermicro x11ssh-ln4f 

- Additional comment:  J-Cat NET Card FEMTO supported

 

Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES extra.lzma for loader 1.03b_mod ds3615 DSM 6.2.2 v0.5_test

- Installation type: BAREMETAL - DELL PowerEdge T110

Additional comments: CPU Xeon X3450, 16Gb DDR3, 1 HDD 2Tb Sata, 1 HDD 3Tb Sata, 4x HDD 3Tb SAS 10K Raid5, LSI Controller.

Link to post
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.7-15284
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L gen7 

- NIC card: Intel Pro 1000CT

- Additional comments: Upgrade from 6.1 control panel to 6.2.2 without a hitch. Disabled C1E In Bios. Disabled the onboard NIC Atheros AR8132M NIC. Using a LSI Controller 

  • Thanks 1
Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER V1.03b  - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: ASrock H310CM-ITX/ac | CPU: Intel i3-8100 Quad-core 3.6 Ghz | NIC: Intel I219V

- Additional comment: reboot required 

 

update.png.a056447d800ea0923837fe7af0457c36.png

 

Link to post
Share on other sites

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - laptop DELL Latitude E6400 series, i5,  8Gb RAM

- Additional comment: reboot required

 

Link to post
Share on other sites

- DSM version prior update: DSM 6.2-24922

- Loader version and model: JUN'S LOADER V1.03b  - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: ASrock H310CM-ITX/ac | CPU: Intel® Pentium® Gold G5400 | NIC: Intel I219V

 

image.thumb.png.2979b86fab289fe9594def7109f7b3db.png

Link to post
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES
- Installation type: BAREMETAL - HP Microserver gen7 (N54L) , 16GB RAM (8GB DDR3 non-ECC X 2)

- NIC card: Built in Broadcom LAN adapter

- Additional comments: C1E disabled, grub.cfg added "disable_mtrr_trim" to prevent huge memory reservation issue, updated rd.gz & zImage from .pat file to usb boot loader part 2

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 + NIC: LR-LINK LREC9202PT (intel)

- Additional comment: manual reboot required

Link to post
Share on other sites

- Outcome of the update:  UNSUCCESSFUL

- DSM version prior update: DSM 6.2.1 - 23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock H61M-DGS + G1610 + 4gb RAM + Onboard NIC

Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update6

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Microserver Gen8 onborad NIC enabled 

- Additional comment: reboot required

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 5.0 / Nanoboot / DS3612xs
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES
- Installation type: BAREMETAL - Intel Server Board S3200SH + Core2Duo E7500

- Additional comment: moved 5 drives from a HP N36L (one of them with smart errors, and other that could not expand to full capacity). Tested the new server before with other drives to check funcionality. put the 5 drives in, booted fine, migrated, and expanded with no problem. it is replacing the bad drive now.

Link to post
Share on other sites
  • Outcome of the update:  SUCCESSFUL
  • DSM version prior update: DSM 6.2.2-23739
  • Loader version and model: JUN'S LOADER v1.03b - DS3615XS
  • Using custom extra.lzma: No
  • Installation type: BAREMETAL - ASRock C2550D41
  • Additional comments: reboot required
Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.7-update4
- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: Yes
- Installation type: BAREMETAL - HP Gen8 Microserver

Additional comments: 

Spoiler

burn usb with 1.03b loader AS IS 
Procede with migration, reboot.
use synology assistant and you will not recognize nas, switch off take off usb stick, put on pc, it recognize two partition, first one is readable , second one appear unformatted, go into first one, copy this http://s000.tinyupload.com/?file_id=06641076704622277403 extra.lzma into first partition over old one.
Put usb stick into server, reboot that's it 

For people who want use micro sd slot into gen8 instead of internal usb, have to change VID and PID whit this VID 0x0424 - PID 0x4030

 

Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 4 (latest for DS3617xs)

- Loader version and model: Jun's Loader v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL (Asus H310I Plus R2.0 + Intel Pentium G5500 + Silverstone ECS04 + 16GB DDR4)

- Additional comments: Everthing is fine.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.