Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 4


tdse13
 Share

Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Outcome of the update: SUCCESSFULL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB ASRock Rack E3C236D4U ; onboard NIC Enabled, additional NIC Intel PRO/1000 PT Dual Port Server Adapter

those nic can be used in DSM 6.2.2-24922, the device id are 1533 and 105e; the driver are igb and e1000e, respectively.

- Additional comments: Reboot required

Link to comment
Share on other sites

Outcome of the update: FAILED
- DSM version prior update: DSM 6.2.1-23824
- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MFU X79 Board with Intel Xeon 2650

- Additionnal comment:  No Network. System has Realtek onboard NIC and HP NC364T PCIe 4 port. Onboard was never recognized even before but after update, the 4 port PCIe stopped working (even with onboard controller disabled). Had to migrate to 1.03b DS3615 which is working great.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.1-23824
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N40L G7

- Additional comment:  HP NC360T, kamzata's modded bios (C1E disabled, internal NIC disabled), Shutdown/Boot from GUI not working (could be a config issue on my side), HP NIC didnt offer Gigabit Speed at the beginning -> Forced Gbps Speed via Mikrotik and it was accepted and now works iwht 1Gbps

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: YES, real3x mod

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comment: Didn't delete the extra2.lzma while switching to real3x's extra.lzma

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Microserver Gen8 onborad NIC enabled 

- Additional comment: reboot required

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: migrated from DS3617 DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - S3420GP + Xeon L3406 + 16GB DDR3 ECC. + mellanox connectx-3 10GBit 

- Additional comment: clean fresh install of DSM 6.2.2-24922 Update 4 on tmp disk drive using another USB Stick, then adding 6x 3TB data storage, repairing system partition on GUI...finish. 

S3420GPX.jpg

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs(fail) >>>>> JUN'S LOADER v1.03b - DS3615xs(good)

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus P6X58D-E | EXPI9402PTBLK | Intel XEON X5690 | 24GB RAM

- Additional comments: Manual Install and more reboot required

 

스크린샷 2019-12-29 오전 3.43.12.png

Link to comment
Share on other sites

NAS #1

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.7-15284
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES - Without lzma NAS not find in network
- Installation type: BAREMETAL - Gigabyte GA-880GAUD3H / AMD Phenom II X6 1090T / 8Go DDR3
- Additional comments: Disabled LAN MB Chipset & C1E Support - Add PCI Card LAN HP NC360T 2 Ports (chipset Intel 82571EB)

 

NAS #2

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.23739
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES - Without lzma NAS not find in network
- Installation type: BAREMETAL - Dell PowerEdge R720 / Intel Bi-Xeon E5-2620 / 192Go DDR3
- Additional comments: Disabled LAN MB Chipset & C1E Support - Add PCI Card LAN HP NC360T 2 Ports (chipset Intel 82571EB)

Edited by Polanskiman
Corrected wrong DSM versions. User mixed them up.
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: fresh install

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: YES, real3x mod

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comment: Didn't delete the extra2.lzma while switching to real3x's extra.lzma -->i confirm this method from Riivo

PS: i booted with Live Linux USB the hardware under LAN to find out MAC Adress, may helpfull : )

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Disks migration from DS3615xs/6.1.2/loader 1.02b

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - HP Gen8 Micro 12Gb i5 3470T - New install  - Dell H310 w/LSI 9211-8i P20 IT Mode + extension Rack of SAS/SATA mixed HDD

- Additional comments: Gen8 onboard Dual Broadcom NiC working (no need of additionnal NiC thanks to  native drivers from IG-88)

  • Like 1
Link to comment
Share on other sites

Outcome of the update: FAILED
- DSM version prior update: DSM 6.2-23739
- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: NO
- Installation type: VM - Proxmox 6.1-5, Nic e1000

 

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2-23739
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VM - Proxmox 6.1-5, Nic e1000

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7

- NIC card: Intel NC360T PCIE

Additional comment: after a fresh reinstall of DSM 6.2.2-24922, I've updated directly from the control panel, to DSM 6.2.2-24922 update 4 (download then install). It worked and it is still working perfectly so far.

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3715xs

- Using custom extra.lzma: Yes @IG-88 custom test 5 for DS3615xs

- Installation type: BAREMETAL - ASRock C2750D4I

- Additional comment: need test 5 lzma in order to boot correctly into dsm DSM 6.2.2-24922 update 3 (otherwise no network) update 4 just works fine.

Link to comment
Share on other sites

 

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type:  VM - ESXi 6.7u1

- Additional comments: Reboot required + network card must be changed to E1000e, otherwise you will not get a connection to the host

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.1.7-15284 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes custom test 5 for DS3615xs

- Installation type: BAREMETAL - Asus P5K WS

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: YES, v0.5_test

- Installation type: BAREMETAL - Intel Core i7-3770 16 GB P8H61-I R2.0

- Additional comment: reboot required | DSM 6.2-23739 to 6.2.2-24922 (Not working LAN, then replace extra.lzma everything is OK)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte C246-W4U - NIC: Intel I210 (don't work) & Intel I219 "working fine"

Additional comments: 6 SATA HDD + 1 SSD cache, 16gb ram 2666Mhz XMP, Loader install in SSD connect via usb 3.0 with usb M-Sata adapter.

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: IG-88 custom test 0.5 for DS3617xs

- Installation type: BAREMETAL - ASROCK Q1900M

Additional comments: no dev\dri folder,  transcoding don't work

 

3617ds.png.2907e20c38669e180823e7fba0720e0c.png

Link to comment
Share on other sites

Outcome of the update: SUCCESSFULL

- DSM version prior update: DSM 6.2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: YES, DSM 6.2.2 v0.5_test

- Installation type: BAREMETAL - MB ASRock Rack E3C236D4U ; onboard NIC Enabled, additional NIC Intel PRO/1000 PT Dual Port Server Adapter

those nic can be used in DSM 6.2.2-24922, the device id are 1533 and 105e; the driver are igb and e1000e, respectively.

- Additional comments: Reboot required

Link to comment
Share on other sites

  • 3 weeks later...

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs 

- Using custom extra.lzma: NO

- Installation type: VM - EXSI 6.7 

- Additional comments: Network adapter is E1000e, make sure only USB 3.0 controller. During update, system will restart (1st time). Wait more than 5 mins, manually restart (2nd time), you will see it appear in SynologyAssistant, but after awhile no ip. Now manually restart again (3rd time). Wait 5mins, everything back.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: Yes - extra.lzma for loader 1.03b_mod ds3617 DSM 6.2.2 v0.5_test (from IG-88)

- Installation type: BAREMETAL - HP MediaSmart EX490 with Celeron 450

- Additional comment: clean fresh install of DSM 6.2.2-24922 Update 4

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...