Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 4


tdse13
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 3
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI H110M-VH PLUS | NIC: Realtek RTL8111H Gigabit LAN controller | Intel G4400
- Additional comments: EVERYTHING WAS SMOOTH WITH A REBOOT

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 (onboard NIC disabled, using NIC: HP NC-360T)

- Additional comment: reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type:BAREMETAL - Intel Core i3-8100t   GIGA-BYTE  H370 AORUS GAMING 3 WIFI

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L gen7 + Intel NIC

- Additional comment: Reboot required, restart + shutdown  OK / Extra Intel NIC, ACPI Bios configured to Version 1.0.

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver g8 + Intel NIC

- Additional comment: Reboot required

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: 2 BAREMETAL - Dell Optiplex 790

- Additional comment: Reboot required

 

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: Yes (strippped out some drivers)

- Installation type: BAREMETAL - Asrock J3455-ITX.

- Additional comments: Couple of reboots required - took a while.. Just leave it..

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-3
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - DELL Optiplex 3020, i3-4160, 8 GB RAM, 2x 4 TB HDD + 128 GB SSD for VMM

- Additionnal comment: reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 5.5 

- Additional comments: reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - eMini LR-SKLUL2 (Intel Core i5-6200U) OEM mb from AliExpress w/ Realtek RTL8111F GBe

- Additional comment: Manual reboot required. Ran builtin updater to download and install. I waited about 5 minutes, no disk activity for a while and did a manual reset, it came up fine and shows to be updated after login. Computer didn't restart by itself.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB - NIC: HP NC360T)

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update3

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: not sure

- Installation type: BAREMETAL - Asrock J3455-ITX

- Additional comments: Manual reboot required

Link to comment
Share on other sites

- Outco me of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Lo ader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte GA-H110m DS2 - i7 6700

- Additional comments: restart + shutdown  Ok,  onboard NIC disabled, Intel PRO 1000 NIC, CPU Temperature not shown (always at 40°)

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Fresh Install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI 970 Gaming - AMD Athlon II X4 630 (AM3 CPU)

- Additional comment: Reboot Required | NIC: HP NC-360T | On-board NIC: Disabled

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 + NIC: HP NC-360T

- Additional comment: reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL -  ASUS H87i-PLUS with i3 4th Gen CPU. Additional 2 port Intel NIC.

- Additional comments: No issues, quick update and auto rebooted fine.. All NIC ports working - including integrated one.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock C2550D4I

- Additional comment: Reboot required.  Intel X540-T2 continues to work OOB.

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma:  YES (from real3x somewhere in this forum)

- Installation type: BAREMETAL - Asrock N3150-ITX with Sata controller (total 12Sata port)

- Additional comments: reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X10SLL-F, Intel Xeon E3-1270v3, 32GB ECC RAM

- Additional comment: reboot required

Link to comment
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs and DS3617xs and JUN'S LOADER v1.04b DS918+

- Using custom extra.lzma: No

- Installation type:  VM - HP Microserver G8  + VM - ESXi 6.7u2

- Additional comments: Reboot required

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...