tdse13 Posted November 5, 2019 Share #1 Posted November 5, 2019 (edited) https://www.synology.com/en-global/releaseNote/DS3615xs Spoiler (2019-11-05) Important Note 1. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. 2. This update will restart your Synology NAS. Fixed Issues 1. Fixed the issue where the LED indicators on the drive slots of DS118, DS218, DS218play, DS418, DS418j, and RS819 might not work properly. 2. Fixed the issue where the certificate might not work properly when the renewal has failed. 3. Fixed the issue where manually renewed certificates may not be applied to certain services. 4. Fixed a security vulnerability regarding Net-SNMP (CVE-2018-18066). 5. Fixed multiple security vulnerabilities regarding Nginx (Synology-SA-19:33). 6. Fixed multiple security vulnerabilities (Synology-SA-19:37). Edited November 6, 2019 by Polanskiman Edited to comply with READ ME topic. Please read it next time! Quote Link to comment Share on other sites More sharing options...
tdse13 Posted November 5, 2019 Author Share #2 Posted November 5, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update3 - Lo ader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J3455-ITX - Additional comments: Manual reboot required 1 Quote Link to comment Share on other sites More sharing options...
jamkiki72 Posted November 6, 2019 Share #3 Posted November 6, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Compaq Elite 8300 SFF , integrated Intel 82579LM NIC - Additional comments: "HYBRID" partition table usb key, UEFI boot disabled in BIOS, reboot required Quote Link to comment Share on other sites More sharing options...
pmchan Posted November 6, 2019 Share #4 Posted November 6, 2019 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Lo ader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock B250M-HDV / i5 7500T / 8Gb DDR4 / crossflashed Dell Perc H200 to LSI 9211-8i / 6x4TB RAID6 + 60GB SSD for VM and 240GB SSD cache / HP NC360T (dual ports nic) - Additional comments: reboot required Edited November 12, 2019 by Polanskiman Please explicit the mobo and specs next time. Quote Link to comment Share on other sites More sharing options...
Cheesy Posted November 6, 2019 Share #5 Posted November 6, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fujitsu D-3644-B / Pentium 5400 g - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
BlaBla1973 Posted November 6, 2019 Share #6 Posted November 6, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port - Additional comments: REBOOT REQUIRED Quote Link to comment Share on other sites More sharing options...
IxsharpxI Posted November 6, 2019 Share #7 Posted November 6, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Lo ader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: VM - Proxmox 6.0-4 - Additional comments: e1000e network adapter Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2019 Share #8 Posted November 6, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
jensmander Posted November 7, 2019 Share #9 Posted November 7, 2019 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.03b (DS3615XS ) - Using custom extra.lzma: NO - Installation type: BAREMETAL - B150, Z77, Z87, Z97, Z170, C232, C236 and HP Microserver - Additional comments: Reboot required - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.04b (DS918+) - Using custom extra.lzma: NO - Installation type: BAREMETAL - B360, C236, Z77, Z170 - Additional comments: Reboot required Edited November 12, 2019 by Polanskiman Separate loader installations. It makes it clearer for reading. Also, please explicit the mobo manufacturer. Quote Link to comment Share on other sites More sharing options...
thadrumr Posted November 8, 2019 Share #10 Posted November 8, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - AMD Gigabyte GA-970A-DS3P AMD FX-4300 - Additional comment: reboot required | NIC: HP NC-360T Quote Link to comment Share on other sites More sharing options...
netdrg Posted November 8, 2019 Share #11 Posted November 8, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen8 - Additional comment: reboot required | NIC: HP NC-360T Quote Link to comment Share on other sites More sharing options...
viettanium Posted November 8, 2019 Share #12 Posted November 8, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Lo ader version and model: Jun'S Loader v1.04b - DS918+ - Using custom extra.lzma: YES (stills using the last one) - Installation type: BAREMETAL - Realan LR-J1900T2 Motherboard - Additional comments: Reboot and installed in 2 minutes, so fast! Quote Link to comment Share on other sites More sharing options...
merve04 Posted November 9, 2019 Share #13 Posted November 9, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: No - Installation type: BAREMETAL - Asus H310M-C, i5-8400, On-board Realtek nic - Additional comments: Reboot required, super fast Quote Link to comment Share on other sites More sharing options...
gadreel Posted November 12, 2019 Share #14 Posted November 12, 2019 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: UNRAID - ASRock H370M itx/ac - RAM 32Gb DDR4 NON-ECC - Intel Core i5 9400F - Pass-through Integrated LAN Intel I211 - Additional comments: Reboot required by the update Quote Link to comment Share on other sites More sharing options...
TRTL74 Posted November 12, 2019 Share #15 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER V1.03b MBR Zandstraal MOD - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: Intel DP35DP | CPU: Intel Core 2 Quad Q9550 | NIC: Intel 82566DC - Additional comment: reboot required Quote Link to comment Share on other sites More sharing options...
The Chief Posted November 12, 2019 Share #16 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS Z170i Pro Gaming / Pentium G4620 / onboard Intel 219V - Additional comments: reboot required Quote Link to comment Share on other sites More sharing options...
iomanis Posted November 12, 2019 Share #17 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP ProLiant Home Server ML110 G7 1x Xeon E3-1230 | HBA PCIEx8 DELL PERC H200 8 ports Sata/SAS Cross flashed LSI 9211-8i Firmware P20 IT) and (HP Intel Pro 1000PT Quad Port 1GbE PCIe-x4 RJ45) Quote Link to comment Share on other sites More sharing options...
Gigaset Posted November 12, 2019 Share #18 Posted November 12, 2019 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Supermicro X8DTI-F / NIC: Intel 82576 Dual-Port Gigabit Ethernet, plus an Intel EXPI9301CTBLK PRO1000 Network Card CT PCIex / Chipset: Dual Intel E5620 Xeon / SATA Additional Controllers: Lindy 4 port SATA 3 PCIe / Disks: 8 x 8TB WD Red, 1 x 256GB SSD - Additional comments: After reboot everything recognised and working Quote Link to comment Share on other sites More sharing options...
PO-Box Posted November 12, 2019 Share #19 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus P10S-M + Lenovo ServeRAID M5110 (mod firmware for IT mode) - Additional comments: reboot required Quote Link to comment Share on other sites More sharing options...
gericb Posted November 12, 2019 Share #20 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell OptiPlex 7010 SFF / CPU: Intel i5-3570 - Quad Core / RAM: 8GB / NIC: Built-in Intel 82579LM - Additional comment: reboot required Quote Link to comment Share on other sites More sharing options...
real3x Posted November 12, 2019 Share #21 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: YES - extra without i915.ko drm_kms_helper.ko drm.ko and i915 fw - Installation type: BAREMETAL - GA-J3455N-D3H - Additional comments: 1 reboot required - onboard LAN is ok - HW transcode is ok Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted November 12, 2019 Share #22 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen8 + NIC: HP NC-360T - Additional comment: reboot required Quote Link to comment Share on other sites More sharing options...
Madia972 Posted November 12, 2019 Share #23 Posted November 12, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: VM - EXSI 6.7 - Additional comments: Update my VM ( VMware 12 to Exsi 6.7 ), change network adapter to E1000e and work perfectly 1 Quote Link to comment Share on other sites More sharing options...
kanada Posted November 12, 2019 Share #24 Posted November 12, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-X150M-PLUS / Cpu : E3-1240L v5 / Ram : 16G Ecc / Nic : RTL8111 Outcome of the update: Reboot required Quote Link to comment Share on other sites More sharing options...
kanada Posted November 12, 2019 Share #25 Posted November 12, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.2-24922 Update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918 - Using custom extra.lzma: No - Installation type: BAREMETAL - Mini Size Intel I3 5005u(ES) with 4*RTL 8111F all in one - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.